[1] [1] HELLE J. VCXO theory and practice［C］//29th Annual Symposium on Frequency Control. Atlantic City, NJ, USA. IEEE, 2005: 300-307.

[2] [2] TIERSTEN H F. Linear piezoelectric plate vibrations［M］. Boston, MA: Springer US, 1969.

[3] [3] VAREL H, ASHKENASI D, ROSENFELD A, et al. Micromachining of quartz with ultrashort laser pulses［J］. Applied Physics A, 1997, 65(4): 367-373.

[4] [4] LI B, LI C, ZHAO Y L, et al. Deep reactive ion etching of Z-cut alpha quartz for MEMS resonant devices fabrication［J］. Micromachines, 2020, 11(8): 724.

[5] [5] TELLIER C R. Some results on chemical etching of AT-cut quartz wafers in ammonium bifluoride solutions［J］. Journal of Materials Science, 1982, 17(5): 1348-1354.

[6] [6] WAN Y, LUAN X H, ZHOU L Z, et al. Wet etching of quartz using a solution based on organic solvents and anhydrous hydrofluoric acid［J］. Materials, 2022, 15(18): 6475.

[7] [7] HAN C, LI C, ZHAO Y L, et al. Research on a micro-processing technology for fabricating complex structures in single-crystal quartz［J］. Micromachines, 2020, 11(3): 337.

[8] [8] WU X M, ZHOU C H, XI P, et al. Etching quartz with inductively coupled plasma etching equipment［C］//Lithographic and Micromachining Techniques for Optical Component Fabrication II, SPIE Proceedings. San Diego, California, USA. SPIE, 2003: 192.

[9] [9] SCHAEPKENS M, OEHRLEIN G S. A review of SiO2 etching studies in inductively coupled fluorocarbon plasmas［J］. ChemInform, 2001, 32(26): 211-221.

[10] [10] JUNG S T, SONG H S, KIM D S, et al. Inductively coupled plasma etching of SiO2 layers for planar lightwave circuits［J］. Thin Solid Films, 1999, 341(1/2): 188-191.

[11] [11] UJIIE T, KIKUCHI T, ICHIKI T, et al. Fabrication of quartz microcapillary electrophoresis chips using plasma etching［J］. Japanese Journal of Applied Physics, 2000, 39(6R): 3677.

[12] [12] GUTTWEIN G K, BALLATO A D, LUKASZEK T J. VHF-UHF piezoelectric resonators: US3694677［P］. 1972-09-26.

[13] [13] BERTE M, HARTEMANN P. Quartz resonators at fundamental frequencies greater than 100 MHz［C］//1978 Ultrasonics Symposium. Ultrasonics Symposium. IEEE, 1978: 148-151.

[14] [14] WANG P Y, LI M H, LING M X, et al. Design and simulation of a piezoelectric micro-QCM with high resonance frequency and quality factor［C］//2020 15th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA). Zhengzhou, Henan Province, China. IEEE, 2021: 522-525.

[15] [15] DUAN Q R, JIN J, YANG F, et al. Research on inverted-mesa-type quartz resonator［C］//2020 15th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA). Zhengzhou, Henan Province, China. IEEE, 2021: 71-75.

[16] [16] JI J, OIGAWA H, ZHAO M, et al. Electrode optimization of 100 MHz high-frequency quartz resonator based on equivalent mass method［J］. Japanese Journal of Applied Physics, 2013, 52(2R): 025201.

[17] [17] ABE T, HUNG V N, ESASHI M. Inverted mesa-type quartz crystal resonators fabricated by deep-reactive ion etching［J］. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2006, 53(7): 1234-1236.

[18] [18] ZHANG J L, LIAO S A, CHEN C, et al. Research on trimming frequency-increasing technology for quartz crystal resonator using laser etching［J］. Micromachines, 2021, 12(8): 894.

[19] [19] OSIPOV A A, IANKEVICH G A, SPESHILOVA A B, et al. High-temperature etching of SiC in SF6/O2 inductively coupled plasma［J］. Scientific Reports, 2020, 10: 19977.

[20] [20] KNIZIKEVIIUS R. Theoretical investigation of crystallographic orientation effect on the chemical etching rate［J］. Vacuum, 2017, 136: 101-104.

[21] [21] KOLARI K. High etch selectivity for plasma etching SiO2 with AlN and Al2O3 masks［J］. Microelectronic Engineering, 2008, 85(5/6): 985-987.