[1] [1] YU F G, GAO F, GUO W ZH, et al.. Review and prospect of forging manipulator ［J］. Machine Design and Research, 2007(Suppl): 12-15.(in Chinese)

[2] [2] GAO F, GUO W ZH, SONG Q Y, et al.. Current development of heavy-duty manufacturing equipment ［J］. Chinese Journal of Mechanical Engineering, 2010, 46(19): 92-107.(in Chinese)

[3] [3] ZHANG Y J, WEI L Y, NIU Y, et al.. Developing status and trend of forging manipulator ［J］. China Metalforming Equipment and Manufacturing Technology, 2012(2): 11-13.(in Chinese)

[4] [4] LIANG Y, ZHAO X P, WANG CH, et al.. Research progress of large forging manipulator ［J］. Scientific and Technological Achievements, 2010(2): 55-57.(in Chinese)

[5] [5] LI G Q, JIANG B, ZHOU B, et al.. Hydraulic control system of 20T forging manipulator ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2015, 45(1): 352-358.(in Chinese)

[6] [6] DANGO, DIENENTHAL M. Schmiedemanipulator, DE: DE20108277 ［P］. 2001-09-06.

[7] [7] XU Y D, YAO J T, ZHAO Y S. Type synthesis of spatial mechanisms for forging manipulators ［J］. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2012, 226(9): 2320-2330.

[8] [8] YU F G, GAO F, SHI Q SH. Configuration method of forging manipulator mechanism based on GF set ［J］. Journal of Mechanical Engineering, 2008, 44(11): 152-159.(in Chinese)

[9] [9] GE H, GAO F. Type design for heavy-payload forging manipulators ［J］. Chinese Journal of Mechanical Engineering, 2012, 25(2): 197-205.

[10] [10] YAN C Y, GAO F, ZHANG Y. Kinematic modeling of a serial-parallel forging manipulator with application to heavy-duty manipulations ［J］. Mechanics Based Design of Structures and Machines, 2010, 38(1): 105-129.

[11] [11] XU Y D, ZHAO Y SH. Comparative analysis of two typical mechanisms of forging manipulator ［C］. 2010 International Conference on Mechanic Automation and Control Engineering (MACE), Wuhan, China: IEEE, 2010: 2314-2317.

[12] [12] XU Y D, ZHAO Y SH. Comparative analysis of the force of the main motion of three kinds of forging manipulator mechanisms ［J］. Journal of Machine Design, 2012, 29(7): 38-42.(in Chinese)

[13] [13] XU Y D, LIANG S P, LU L, et al.. Force capabilities analysis of a typical mechanism of forging manipulator using a modified scaling factor method ［J］. International Journal of Mechanism and Robotic Systems, 2013, 1(3): 152-169.

[14] [14] XU Y D, LIANG J J, YANG Y D, et al.. A completely decoupled forging manipulator mechanism ［J］. Journal of Machine Design, 2015, 32(6): 18-21.(in Chinese)

[15] [15] JIANG Y, LI T M, WANG L P. Dynamic modeling method for overconstrained parallel mechanism ［J］. Journal of Mechanical Engineering, 2013, 49(17): 213-219.(in Chinese)

[16] [16] CHEN B, ZONG G H, YU J J, et al.. Modeling and analysis of a 2-DOF spherical parallel turntable ［J］. Journal of Mechanical Engineering, 2013, 49(13): 24-30.(in Chinese)

[17] [17] ZHAO Y J, GAO F. Inverse dynamics of the 6-DOF out-parallel manipulator by means of the principle of virtual work ［J］. Robotica, 2009, 27(2): 259-268.

[18] [18] WANG SH CH, HIROMITSU HIKITA, HIROSHI KUBO, et al.. Kinematics and dynamics of a 6 degree-of-freedom fully parallel manipulator with elastic joints ［J］. Mechanism and Machine Theory, 2003, 38(5): 439-461.

[19] [19] HUANG ZH, LI Q C. General methodology for type synthesis of lower-mobility symmetrical parallel manipulators and several novel manipulators ［J］. International Journal of Robotics Research, 2002, 21(2): 131-146.

[20] [20] ZHAO T SH, DAI J S, HUANG ZH. Geometric analysis of overconstrained parallel manipulators with three and four degrees of freedom ［J］. JSME International Journal-Series C, 2002, 45(3), 730-740.

[21] [21] LU S N, ZLATANOV D, DING X, et al.. A novel prism deployable mechanism based on straight-line mechanism ［C］. 2nd IFToMM Symposium on Mechanism Design for Robotics, Beijing, China: 2012.