[5] [5] SHKEL A M.Precision navigation and timing enabled by microtechnology:Are we there yet?［C］//Kona,HI: Sensors,2010 IEEE,2010: 5-9.

[10] [10] LUTWAK R.Micro-technology for positioning,navigation,and timing towards PNT everywhere and always［C］//Laguna Beach,CA:2014 International Symposium on Inertial Sensors and Systems(ISISS),2014 :1-4.

[12] [12] HABIBI S,COOPER S J,STAUFFER J M,et al. Gun hard inertial measurement unit based on MEMS capacitive accelerometer and rate sensor ［C］//Monterey,CA:2008 IEEE/ION Position,Location and Navigation Symposium,2008:232-237.

[19] [19] YANG Chunhua,LIU Qin,LI Tao. The reliability model of micro-electromechanical system based on fracture mechanism［C］//Guiyang:The Proceedings of 2011 9th International Conference on Reliability,Maintainability and Safety,2011:378- 382.

[23] [23] MAHOUDIAN R,HOWE R T. Critical review:Adhesion in surface micromechanical structures ［J］. Journal of Vacuum Science & Technoloty B,1997,15(1):1-20.

[24] [24] HUANG Yunhan,VASAN A S S,DORAISWAMI R,et al. MEMS reliability review［J］.IEEE Transactions on Device & Materials Reliability,2012,12(2):482-493.

[25] [25] TANNER D M,WALRAVEN J A,HELGESEN K,et al. MEMS reliability in shock environments ［J］.Office of Scientific & Technical Information Technical Reports,2000:129-138.

[26] [26] YANG Chen,ZHANG Bin,CHEN Dajing,et al. Drop-shock dynamic analysis of MEMS/package system［C］//Hongkong:2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems(MEMS),2010:520-523.

[27] [27] LI Jue,BROAS M,MAKKONEN J,et al. Shock impact reliability and failure analysis of a three-axis MEMS gyroscope［J］. Journal of Microelectromechanical Systems,2014,23(2):347-355.

[28] [28] DAVID R M,KAN B C,BABAK J,et al.Silicon carbide resonant tuning fork for micro sensing applications in high-temperature and high G-shock environments［J］. Engineering Sciences,2012,10(5):36-41.

[29] [29] KARNICK D,BALLAS G,KOLAND L,et al. Honeywell gun-hardinertial measurement unit(IMU)development［C］//Monterey,CA,USA:PLANS 2004 Position,Location and Navigation Symposium(IEEE Cat No. 04CH37556),2004:49-55.

[30] [30] CHAUMET B,LEVEREIER B,ROUGEOT C,et al. A newsilicon tuning fork gyroscope for aerospaceapplications［C］//Karlsruhe:Syposium Gyro Technology,2009.

[31] [31] SHEARD K,SCAYSBROOK I,COX D.MEMS sensor and integrated navigation technology for precision guidance［C］//Monterey,CA:2008 IEEE/ION Position,Location and Navigation Symposium,2008:1145-1151.

[32] [32] YOON S,PARK U,RHIM J,et al.Tactical grade MEMS vibrating ring gyroscope with high shock reliability［J］. Microelectronic Engineering,2015,142:22-29.

[33] [33] BROWM T G. Harsh military environments and microelectromechanical(MEMS)devices［C］//Toronto,Ont.:Sensors,2003 IEEE,2003:753-760.

[34] [34] PRYPUTNIEWICZ R J.Survivabilit of MEMSpackages at high-G loads［J］. International Journal of Optomechatronics,2014,8(4):391-399.

[35] [35] AZGIN K,TEMIZ Y,AKIN T,et al. A novel in-operation high g-survivable MEMS gyroscope［C］//Atlanta,GA:Sensors,2007 IEEE, 2007:111-114.

[36] [36] LUTWAK R. Emerging microsystem technologies for autonomous positioning,navigation and timing(PNT)［R］. USA:DARPA/MTO,2016.

[37] [37] NAGOURNEY T,SINGH S,SHIARI B,et al. Fabrication of hemispherical fused silica micro-resonator with tailored stiffness and mass distribution［C］//Belfast, UK: 2018 31st IEEE International Conference on Micro Electro Mechanical Systems(MEMS) IEEE,2018:1000-1003.

[40] [40] SUNDARAM S,TORMEN M,TIMOTIJEVIC B,et al. Vibration and shock reliability of MEMS:modeling and experimental validation［J］. Micromech Microeng,2011,21(4):1-13.

[42] [42] ZHONG Weiwei,HAN Guowei,SI Chaowei,et al. Fabrication and characterization of an SOI MEMS gyroscope［J］. Journal of Semiconductors,2013,34(6):58-62.

[45] [45] LIU Hong,SU Zhong,LIU Ning,et al. Research on the resonator of bell vibratory gyro under axial impact［C］//Nanjing:Proceeding of the 33rd Chinese Control Conference(CCC),2014:598-601.

[47] [47] LU Yipeng,WU Xiaosheng,ZHANG Weiping,et al. Optimization and analysis of novel piezoelectric solid micro-gyroscope with high resistance to shock［J］. Microsystem Technologies 2010,16(4):571-584.

[48] [48] LU Yipeng,WU Xiaosheng,ZHANG Weiping,et al. Research on reference vibration for a two-axis piezoelectric micro-machined gyroscope［J］. Journal of Micromechanics and Micro engineering,2010,20(7):075039.

[51] [51] LIU Yu,LU Yongle,DU Xiaopeng,et al. Analysis of high shocking resistance of an improved node-plane supporting vibration beam gyroscope［J］. International Journal of Digital Content Technology & Its Applications,2012,6(9):319-328.

[52] [52] ZHOU Jian,JIANG Tao,JIAO Jiwei,et al. Design and fabrication of a micromachined gyroscope with high shock resistance［J］. Microsystem Technologies,2014,20(1):137-144.

[53] [53] CHEN Deyong,ZHANG Ming,WANG Junbo. An electrostatically actuated micromachined vibrating ring gyroscope with highly symmetric support beams［C］//Kona:Sensors,2010 IEEE,2010:860-863.

[54] [54] CHEN Li,CHEN Deyong,WANG Junbo. The design and analysis of a robust micro-machined vibrating ring gyroscope［C］//Beijing:Proceedings of SPIE 2008 International Conference on Optical Instruments and Technology,2008:71-79.