[1] Wang Hui, Zhang Zheng, Liu Tianye. Surface error modeling, evaluation and optimization of large optics in inertial confinement fusion laser system[J]. Fusion Eng Des, 137, 61-70(2018).

[2] [2] NayarB K. Nonlinear optical properties of ganic molecules crystals[M]. Elsevier, 2012.

[3] Tie Guipeng, Dai Yifan, Guan Chaoliang. Research on full-aperture ductile cutting of KDP crystals using spiral turning technique[J]. J Mater Process Tech, 213, 2137-2144(2013).

[4] Chen Ni, Chen Mingjun, Wu Chunya. The design and optimization of micro polycrystalline diamond ball end mill for repairing micro-defects on the surface of KDP crystal[J]. Precis Eng, 43, 345-355(2016).

[5] Li Zhanjie, Jin Gang, Fang Fengzhou. Ultrasonically assisted single point diamond turning of optical mold of tungsten carbide[J]. Micromachines, 9, 77-87(2018).

[6] Cheng Jian, Xiao Yong, Liu Qi. Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal[J]. Mater Design, 157, 447-456(2018).

[7] Wang Yongqiang, Yin Shaohui, Huang Han. Magnetorheological polishing using a permanent magnetic yoke with straight air gap for ultra-smooth surface planarization[J]. Precis Eng, 40, 309-317(2015).

[8] Ji Fang, Xu Min, Wang Baorui. Preparation of methoxyl poly (ethylene glycol) (MPEG)-coated carbonyl iron particles (CIPs) and their application in potassium dihydrogen phosphate (KDP) magnetorheological finishing (MRF)[J]. Appl Surf Sci, 353, 723-727(2015).

[9] Peng Wenqiang, Li Shenyi, Guan Chaoliang. Ultra-precision optical surface fabricated by hydrodynamic effect polishing combined with magnetorheological finishing[J]. Optik-International Journal for Light and Electron Optics, 156, 374-383(2018).

[10] Clark W I, Shih A J, Hardin C W. Fixed abrasive diamond wire machining—part I: Process monitoring and wire tension force[J]. Int J Mach Tool Manu, 43, 523-532(2003).

[11] Pang Qilong, Kuang Liangjie, Xu Youlin. Study on the extraction and reconstruction of arbitrary frequency topography from precision machined surfaces[J]. P I Mech Eng B-J Eng, 233, 1772-1780(2019).

[12] Chen Ni, Chen Mingjun, Wu Chunya. Cutting surface quality analysis in micro ball end-milling of KDP crystal considering size effect and minimum undeformed chip thickness[J]. Precis Eng, 50, 410-420(2017).

[13] Chen Ni, Chen Mingjun, Guo Yanqiu. Effect of cutting parameters on surface quality in ductile cutting of KDP crystal using self-developed micro PCD ball end mill[J]. Int J Adv Manuf Tech, 78, 221-229(2015).

[14] Zheng Wei, Zhou Ming, Zhou Li. Influence of process parameters on surface topography in ultrasonic vibration-assisted end grinding of SiCp/Al composites[J]. Int J Adv Manuf Tech, 91, 2347-2358(2017).

[15] Wang Shengfei, An Chenhui, Zhang Feihu. An experimental and theoretical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal[J]. Int J Mach Tool Manu, 106, 98-108(2016).

[16] Tian Fujing, Yin Ziqiang, Li Shengyi. Theoretical and experimental investigation on modeling of surface topography influenced by the tool-workpiece vibration in the cutting direction and feeding direction in single-point diamond turning[J]. Int J Adv Manuf Tech, 86, 2433-2439(2016).

[17] Wang Xuezhi, Yu Tianbiao, Dai Yuanxing. Kinematics modeling and simulating of grinding surface topography considering machining parameters and vibration characteristics[J]. Int J Adv Manuf Tech, 87, 2459-2470(2016).

[18] Krolczyk G M, Maruda R W, Krolczyk J B. Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions[J]. Measurement, 121, 225-239(2018).

[19] Zhang Qing, Zhang Song, Shi Wenhao. Modeling of surface topography based on relationship between feed per tooth and radial depth of cut in ball-end milling of AISI H13 steel[J]. Int J Adv Manuf Tech, 95, 4199-4209(2018).

[20] Wei Weihua, Li Yuantong, Xue Tongming. Research on milling forces during high-speed milling of wood-plastic composites[J]. BioResources, 14, 769-779(2018).

[21] Wei Weihua, Li Yuantong, Mei Changtong. The research progress of machining mechanisms in milling wood-based materials[J]. BioResources, 13, 2139-2149(2018).

[22] Itoh T, Yamauchi N. Surface morphology characterization of pentacene thin film and its substrate with under-layers by power spectral density using fast Fourier transform algorithms[J]. Appl Surf Sci, 253, 6196-6202(2007).

[23] Nieslony P, Krolczyk G M, Wojciechowski S. Surface quality and topographic inspection of variable compliance part after precise turning[J]. Appl Surf Sci, 434, 91-101(2018).