High Power Laser and Particle Beams, Volume. 32, Issue 3, 032005(2020)

Research on influence of cutting parameters on frequency characteristics of KDP surface topography

Liangjie Kuang1... Qilong Pang1,*, Mingjun Chen2, Luqiang Ma1 and Youlin Xu1 |Show fewer author(s)
Author Affiliations
  • 1College of Mechatronics Engineering, Nanjing Forestry University, Nanjing 210037, China
  • 2Center for Precision Engineering, Harbin Institute of Technology, Harbin 150001, China
  • show less
    Figures & Tables(12)
    Crystal surface and contour at different cutting depth measured by a white light interferometer
    Crystal surface and contour at different feed rate measured by a white light interferometer
    Crystal surface and contour at different spindle speed measured by a white light interferometer
    Results of PSD at different depth of cut
    Results of PSD at different feed rate
    Results of PSD at different spindle speed
    Comparison of surface profile and actual frequency characteristics at different depth of cut
    Comparison of surface profile and actual frequency characteristics at different feed rate
    Comparison of surface profile and actual frequency characteristics at different spindle speed
    • Table 1. Parameters of diamond turning tool

      View table
      View in Article

      Table 1. Parameters of diamond turning tool

      nose radius r/mm edge radius rn/nm rake angle γ0/(°) clearance angle α0/(°)
      3.215009
    • Table 2. Cutting parameters and RMS of contour

      View table
      View in Article

      Table 2. Cutting parameters and RMS of contour

      No.(group)spindle speed n/(r/min) feed rate f /(μm/r) depth of cut ap/μm RMS of contour Rq/nm
      140010317
      635
      937
      23008315
      1224
      1827
      350010525
      40024
      30026
    • Table 3. Scale a and its parameters of calculations

      View table
      View in Article

      Table 3. Scale a and its parameters of calculations

      frequency f/μm−1size L/μm number Nwaviness central frequency fsmexihat central frequency fcsampling period Δscale a
      low0.005 63602560.015 80.251.41211.209 3
      0.008 40.023 77.472 9
      mid0.011 20.031 25.674 8
      0.013 80.038 84.563 2
      high0.027 70.077 92.272 8
    Tools

    Get Citation

    Copy Citation Text

    Liangjie Kuang, Qilong Pang, Mingjun Chen, Luqiang Ma, Youlin Xu. Research on influence of cutting parameters on frequency characteristics of KDP surface topography[J]. High Power Laser and Particle Beams, 2020, 32(3): 032005

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Jul. 10, 2019

    Accepted: --

    Published Online: Mar. 19, 2020

    The Author Email: Pang Qilong (qlpang@njfu.edu.cn)

    DOI:10.11884/HPLPB202032.190262

    Topics