[1] [1] MENG X F, LI L F. Methods for increasing sidewall steepness of reactiveion-beam etched, sub-micrometer-period gratings［J］. Acta Optica Sinica, 2008, 28(1): 189-193. (in Chinese)

[2] [2] ZHAO B，QI X D. Manufacturing of high efficient holographic diffraction gratings［J］. Opt. Precision Eng., 2001,9(2)：109-114.(in Chinese)

[3] [3] BAYANHESHIG,SHAO X X，CUI J CH, et al.. Off-axis parabolic/Lloyd mirror interferometric systems for manufacturing plane holographic gratings［J］. Opt. Precision Eng., 2011,19(1)：56-63. (in Chinese)

[4] [4] TAN X, LI W H, BAYANHESHIG, et al.. Fabrication of ultraviolet holographic blazed graing［J］. Opt. Precision Eng., 2010,18(7)：1536-1542. (in Chinese)

[5] [5] BAYANHESHIG，ZHANF H T, LI W H. Mathematic model and experiment verification of spin coating on concave spherical substrate［J］. Opt. Precision Eng., 2008, 16(2)：229-234. (in Chinese)

[6] [6] DILL F H, HORNBERGER W P, HAUGE P S, et al.. Characterization of positive photoresist［J］. IEEE. Trans. Electrom Devices, 1975, 22(7): 445-452.

[7] [7] MACK C A. Development of positive photoresist［J］. Electrochem.Soc., 1987, 134:148-152.

[8] [8] MELLO B A, COSTA I F, LIMA C R A, et al.. Developed profile of holographically exposed photoresist gratings［J］, Appl. Opt., 1995, 34(4): 597-603.

[9] [9] ZANKE C, GOMBERT A, ERDMANN A, et al.. Fine-tuned profile simulation of holographically exposed photoresist gratings［J］. Opt. Comm., 1998, 154(1): 109-118.

[10] [10] BRITTEN J A, BOYD R D, SHORE B W. In-situ end-point detection during development of submicrometer grating structures in photoresist［J］. Opt. Eng., 1995, 34(2):474-479.

[11] [11] ZHAO J S, LI L F, WU ZH H. Modeling of In-Situ Monitoring curves during development of holographic gratings［J］. Acta Optica Sinica, 2004, 24(8): 1146-1150. (in Chinese)

[12] [12] ZHAO J S, LI L F, WU ZH H. In-situ self-monitoring of latent image in fabrication of holographic gratings［J］. Acta Optica Sinica, 2004, 24(6): 851-858. (in Chinese)

[13] [13] KONG P, BAYANHESHIG, LI W H, et al.. Modeling and in-situ monitoring of the asymmetric exposure and development of holographic grating［J］. Acta Optica Sinica, 2010, 30(1): 65-69. (in Chinese)

[14] [14] ZHAO J S, LI L F, WU ZH H. Method for controlling groove depth and duty cycle of rectangular photoresist gratings［J］. Acta Optica Sinica, 2004, 24(9): 1285-1291. (in Chinese)

[15] [15] LIU Q, WAN H, WU J H. Research on acquisition of low gradient photoresist gratings［J］. Acta Photonica Sinica，2008，37(7)：1401-1405. (in Chinese)

[16] [16] CHEN G, WU J H, LIU Q. Study on the profile evolution of the photoresist grating mask and its law［J］. Optical Technique, 2008,34(1):133-140. (in Chinese)

[17] [17] MONTOYA J C, CHIH H CH, HEILMANN P K, et al.. Doppler writing and linewidth control for scanning beam interference lithography［J］. J.Vac.Sci.Technol.B, 2005, 23(6), 2640-2645.

[18] [18] ARTHUR T, HO W K, KIEW C M, et al.. Real-time control of photoresist development process［J］. SPIE, 2005, 5755: 244-250.