Opto-Electronic Engineering, Volume. 48, Issue 4, 200381(2021)

Preparation method for polyimide films with imaging potential

Lv Gang1,2, Yang Wei1、*, Mao Danbo1, Wu Shibin1, and Ren Ge1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    Polyimide (PI) film is widely used in aerospace, microelectronics, and other fields because of its excellent thermal stability and mechanical strength. However, there are very few reports about its application in the direction of optical imaging. To use PI film for imaging, the requirements for the optical homogeneity of the PI film are extremely demanding. The optical homogeneity of the stretch-resistant PI film proposed in this paper with 100 mm diameter and low thermal expansion coefficient meets the Rayleigh criterion, which has the potential for applications in the imaging field. In addition, the tensile strength of this PI is 285 MPa, which is ~2.6 times that of the PMDA-ODA type PI; the coefficient of thermal expansion is about 3.2 ppm?K-1, which is comparable to that of the Novastrat?905 type PI and is one order of magnitude lower than that of the commercial PI films. These excellent basic properties reserve more space to further improve the space adaptability of the PI film. The solution of the optical homogeneity of the PI film will lay the foundation for its application in thin film diffractive optical elements.

    Tools

    Get Citation

    Copy Citation Text

    Lv Gang, Yang Wei, Mao Danbo, Wu Shibin, Ren Ge. Preparation method for polyimide films with imaging potential[J]. Opto-Electronic Engineering, 2021, 48(4): 200381

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Article

    Received: Oct. 18, 2020

    Accepted: --

    Published Online: Sep. 4, 2021

    The Author Email: Wei Yang (ywei@ioe.ac.cn)

    DOI:10.12086/oee.2021.200381

    Topics