Chinese Journal of Lasers, Volume. 37, Issue 12, 3196(2010)

Study on Direct Writing Thin Film Conductive Line Using Pulse Fiber Laser

Li Xiaogang*, Chen Jimin, and Liu Furong
Author Affiliations
  • [in Chinese]
  • show less

    When thin film resistors are directly written by laser, auxiliary material can cause impurity pollution. Thickness and roughness of the film cannot be reduced easily. To reduce impurity pollution, film thickness, roughness and improve the performance of microcircuit directly written by laser, the research of metallic film resistors directly written by transmissive laser is carried out. The characteristic relation of laser spot energy distribution and film line width is analyzed. The conductive film of line width less than spot dimension can be obtained. The experimental results show that the increase of scanning speed or the decrease of defocusing amount can lead to the decline of overlapping cofficient of spot and line width decline. Meanwhile, excessively high laser power can lead to abliative damage to thin film; excessively low laser power cannot melt the powder on the glass substrate. With different powders in the process, it is known that Zn powder can form a uniform thin film while Al /Zn powder cannot form a uniform thin film.

    Tools

    Get Citation

    Copy Citation Text

    Li Xiaogang, Chen Jimin, Liu Furong. Study on Direct Writing Thin Film Conductive Line Using Pulse Fiber Laser[J]. Chinese Journal of Lasers, 2010, 37(12): 3196

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: laser manufacturing

    Received: Jun. 7, 2010

    Accepted: --

    Published Online: Mar. 12, 2014

    The Author Email: Xiaogang Li (s200813026@emails.bjut.edu.cn)

    DOI:10.3788/cjl20103712.3196

    Topics