Interest of the research in terahertz (THz) wave has been strongly motivated by its wide applications in the fields of physics, chemistry, biology, and engineering. Developing efficient and reliable THz source is of uttermost priority in these researches. Numerous attempts have been made in fulfilling the THz generation. Greatly benefited from the progress of the ultrafast pulses, the laser-induced-plasma is one of the auspicious tools to provide desirable THz waves, owing to its superiorities in high power threshold, intense THz signal, and ultrawide THz spectrum. This paper reviews the physics and progress of the THz generation from the laser-induced plasmas, which are produced by gas, liquid, and solid. The characteristics of the emitted THz waves are also included. There are many complicated physical processes involved in the interactions of laser-plasma, making various laser-plasma scenarios in the THz generations. In view of this, we will only focus on the THz generation classified by physical mechanisms. Finally, we discuss a perspective on the future of THz generation from the laser-induced plasma, as well as its involved challenges.
Introduction
Terahertz (THz) band is sandwiched between the microwave (MW) and infrared (IR) in the electromagnetic spectrum, spanning from 0.1 THz to 10 THz. The THz waves can be accessed by electronics and photonics technologies. In the last decades, the continuous supplies of new devices and materials by the progresses in the fields of photonics and electronics have bridged the THz gap. As it is an area of convergence between the fields of electronics and photonics, there are many significant features in the THz band. Photo energy at 1 THz is only 4.3 meV, far lower than that of an X-ray photon. At such energy level, ionizing a living cell with a THz source seems to be hard. Therefore, unlike the X-ray, the THz radiation is relatively safe for the sample to be detected; Compared with IR, Mie scattering hardly happens to the THz waves, owning to its longer wavelength. Therefore, it is transparent for non-polar and non-conducting materials, such as plastic, paper, and cloth, which makes it promising in the nondestructive evaluation. As the dipole-allowed rotational and vibrational transition of molecules undergoing within the THz range, so it features signature fingerprint in the forms of the THz spectrum; As the wavelength of THz wave is on the order of tens micrometers, the spatial resolution is higher than that of MW when it is used in imaging. With these performances, it has been proved to be particularly valuable in the characterization of semiconductor1-3, biology4-6, diagnose the dynamics of water molecules7, non-destructive testing8-10, homeland security9, and THz communication11-13. Instead of using weak fields to observed THz modes, one can also use strong THz field to actively trigger nonlinear THz responses of materials14-25, induces the materials to a new state26-31, rapid phase transitions32 or even THz atom probe microscopy33.
Impressive advance has been achieved in the development of THz radiation in the recent years, owing to the fast progress of femtosecond lasers. Specifically, the energy of table-top femtosecond laser is increasing after the onset of the technology of chirped pulses amplification. There are several commonly used technologies to generate THz waves, including photoconductive antenna (PCA)34-37, optical rectification (OR)38-41, and plasma42-44. For the scheme of THz generation based on plasma, if the optical field strength is high enough to separate electrons from a media, the formed plasma will emit THz waves. Moreover, there are extraordinarily high damage threshold for the plasma scheme, which means high-energy laser pulses can be employed for THz generation. As a result, the laser-induced plasma is a more promising way to generate THz waves. It is common to group various forms of matter into distinct states, such as gas, liquid, and solid. These matters are made from atoms, which are electrically neutral. Under some conditions, such as the interaction of strong electric field of femtosecond laser pulse, these matters will be ionized to set free electrical charges and induce the plasma. With the onset of plasma, the THz wave can be radiated out. The schematic diagram of THz generation from plasma is shown in Fig. 1. Three states of matters are different in their own physical characters, leading to different scenarios of THz generations.
Figure 1.Schematic diagram of THz generation from laser-induced plasma in gas, liquid, and solid.
In this paper, we will focus on the THz generation by laser-induced plasma in gas, liquid, and solid. Since laser-plasma interactions in plasma are quite complicated, we will discuss only the various THz generation under different targets, including corresponding mechanisms and characters of the radiated THz waves, while less ionization dynamics are involved. This paper is organized as follows: In Section THz generation from laser-induced plasma in gas, we will introduce the THz wave generation from air plasma induced by one/two-color pulses. All the THz generation are pumped by laser pulses with the intensity lower than
, at a so-called nonrelativistic level. In Sections THz generation from laser-induced-liquid plasma and THz generation from laser-induced-solid plasma, the THz generation associated with the induced plasma in liquid and solid media will be discussed, as well as their physical mechanisms and the attempts to improve the performances of the generated THz waves. Liquids will not be considered as the target to be irradiated by relativistic laser pulse. Finally, we summarize these THz generation scenarios and discuss the future development and challenges of plasma-driven THz sources in Section Summary and outlook.
THz generation from laser-induced plasma in gas
When femtosecond pulses propagate in optical media, a plasma will be formed as the result of ionization if the optical field strength is sufficiently intense to separate electrons. THz waves radiate from the laser-induced-air plasma. As for the involved pump optical field, the scheme of THz generation from air plasma can be divided into two parts. One is pumped by optical pulses with one central wavelength, as called one/single-color field. The other one is pumped by optical pulses with two central wavelengths, as called two-color field. The ultrafast pulses with the central wavelength of 800 nm are commonly used in the former, while the pulses with the central wavelength of 800 nm and its second harmonic of 400 nm are usually used in the latter. The physical mechanisms and characters of THz generation are different, owing to the involved pump fields.
Physical mechanisms for THz generation from laser-induced-gas plasma
THz generation from gas plasma induced by one-color pulse
As demonstrated by Hamster, the experimental condition of this THz generation scenario is quite simple that a formed plasma is enough. In this experiment, the laser pulse with the pulse width of 120 fs and energy of 50 mJ was focused to form plasma, a pulsed radiation of electromagnetic wave at THz frequency was observed thereafter. Theoretically, the ponderomotive force accelerating the free electrons induces polarization, which was considered to be the mechanism of the THz generation. The ponderomotive force is described by45-47
here
and
are the charge and mass of the particle, respectively.
and
are the intensity and frequency of the femtosecond pulses.
and c are the permittivity and light speed in vacuum, respectively. The ponderomotive force model which describes the THz generation is illustrated in Fig. 248.
Figure 2.Schematic diagram of THz generation by the ponderomotive force.Jr, Jz are the radial and axial currents, respectively. λp is plasma wavelength. τL is laser pulse duration. Figure reproduced with permission from ref.48, American Physical Society.
When laser pulse propagates in the air, it is subjected to the effects of diffraction, energy depletion, plasma defocusing, and nonlinear Kerr, which lead to an optical intensity gradient. The spatiotemporal optical intensity gradient causes the ponderomotive force on the electrons. The forces applied to the electrons make them to accelerate and oscillate, resulting in plasma current. The axial and transverse components of plasma current have velocities close to the group velocity of the laser pulse. The induced plasma current travels with laser pulse and emits electromagnetic pulse (EMP). That is so-called ponderomotive force model. The axial EMP electric field outside the filament is small due to shielding by surface charges at the air-plasma boundary. Note that, the characteristic frequency of the EMP measured outside of the plasma depends on the laser pulse duration and not on the local plasma frequency48. Technically, the ponderomotive force, radiation pressure force, as well as ionization are all included in this model.
C. Cheng presented a model to elucidate the physics underlying the THz generation from a femtosecond pulse induced plasma49. This so-called dipole model can be described by the process of electromagnetic emission of a diploe, in which the laser pulses spatially separate the electrons from the heavier ions to induce the dipole. The dipole moment along z-axis in the plasma channel induce the longitudinal current, which can be written as
, here
is the electron density and
is the longitudinal electron-ion separation, r is the spatial vector, z is the vector along z-axis,
is time. The current oscillating along the z-axis radiates a symmetric THz wave as
here Erad is the radiated electromagnetic field,
is the permeability in vacuum. The impact of the dipole contribution to the THz generation from the plasma induced by femtosecond pulses was also investigated experimentally and theoretically50.
In 2002, M. Kolesik presented a unidirectional optical pulse propagation equation (UPPE) to illustrate in the context of super continuum generation in the air51, 52. In this propagation equation, various correction terms, including the linear and nonlinear terms, in the envelope approximation can be turned on or off, thus the corresponding effect can be evaluated. This model is also illustrated in the context of extreme focusing on a femtosecond pulse. The UPPE provides a seamless transition from Maxwell’s equation to the various envelope-based models. These characters make the description of the EMP radiation more flexible and comprehensive. L. Berge et al. combined the UPPE and local current model and performed a lot of nice works in the THz generation induced by two-color pulse53-56. The unidirectional pulse propagation model for linearly polarized pulses can be written as,
here
represents the Fourier transform, with respect to transverse coordinates and time, of the electric field.
is the wave number. The nonlinear polarization
originates from the Kerr effect, the electron current
and a photon absorption term
.
In 2007, D’Amico reported the generation of THz emission in the air as a new mechanism, which offers the advantages of simplicity57, 58. In their experiment, the laser with the energy of 4 mJ per pulse, repeat rate of 10 Hz, a central wavelength of 800 nm, and a width of 150 fs has been focused in the air with a 2 m focal length lens to create a single filament. The experimental setup is shown in Fig. 3. The spectral component of the THz radiation from the plasma filament was measured by means of a heterodyne detector. The strong forward directed THz radiation was attributed from the laser induced plasma to a transition-Cherenkov emission since the electric current in the plasma moves behind the ionization front at light velocity. Compared with the Cherenkov emission, there is no net charge in the plasma and only a dipole-like structure is moving in the plasma. Additionally, the THz wave can be generated even if the velocity of the ionization front is exactly the same as the light velocity. In this model, the source term Sz is derived by the work of Spangle et al48. The induced current can be written as
, here
is the field strength of plasma wave,
is the frequency. With this current, the vector potential A will be obtained as,
, k is the field wave vector,
is radiation radius. Thus, the magnetic
and the radiated electric field can be obtained by its cross product of
and
.
Figure 3.Schematic of experimental setup for measurement of THz waves from transition-Cherenkov emission. Figure reproduced with permission from ref.57, American Physical Society.
The spectral intensity of the transition-Cherenkov emission reads as
here
is the electron classical radius,
is the electron collision frequency.
and
are the energy of laser and THz pulses.
is the central frequency of laser pulse,
is the plasma length,
is the solid angle of radiation,
is the THz radiation angle related with the laser propagation axis. One has to consider the ratio of THz wavelength over the plasma length is an important factor in this expression. With this transition-Cherenkov model, the THz radiations from a single-color filament in both time and frequency domains were investigated50. It was found that the plasma density, electron collision frequency, and pulse duration play important roles in the generated THz peak frequency and width of the THz spectrum.
THz generation from plasma induced by two-color pulse
In the senior of THz generation from plasma induced by one-color pulses, optics-THz conversion efficiency is lower than 10–7, which cannot be used practically. However, the plasma from gas was still regarded as a promising target to radiate strong THz waves, owing to its high damage threshold and accessible phase matching in gas. Hence, the scheme of plasma induced by one-color pulses turns to two-color pulses.
In 2000, Cook and his coworkers used the femtosecond pulses with the fundamental wave (FW) and second harmonic wave (SHW) to form a plasma channel for THz waves generation59. They found that the amplitude of THz waves is surprisingly stronger than that of the plasma induced by the single-color pulse. They attributed this THz radiation to four-wave rectification (FWR), in which the third-order susceptibility was considered in the process of the radiation.
In 2004, Markus Kress measured the dependence of the THz signal on the BBO-to-focus distance60. As predicted from the four-wave rectification model, the maximal THz amplitude relies on the relative phase between the FW and SHW
, here
and
are the refractive indices for FW and SHW, respectively.
is the distance between the BBO crystal to the focus. They found that the phase shift between the FW and SHW has a great impact on the generated THz signal, as shown in Fig. 460.
Figure 4.Dependence of THz signal on the phase shift between the FW and SHW. The distance of BBO-to-focus corresponds the variety of the phase shift between the two-color pulses. Figure reproduced with permission from ref.60, The Optical Society.
In 2006, X. Xie studied the THz generation from the plasma induced by two-color pulses through the individual control of the phase, polarization, and amplitude of the FW and SHW61. The measurement results show that the THz amplitude is proportionate to the intensity of FW and the square root of the intensity of SHW, as shown in Fig. 5. They attributed it as the third-order nonlinear process mixing FW and SHW in the ionized plasma, called four-wave mixing (FWM)61. The generated THz field can be written as
Figure 5.Dependence of THz field on the electric field strength of (a) FW and (b) SHW. Figure reproduced with permission from ref.61, American Physical Society.
here
and
are the electric field of the SHW and FW, respectively.
is the third-order susceptibility. With this model, the experimental results can be explained well.
Initially, the proposed FWM model explained successfully the physical mechanism of THz radiation from the plasma induced by two-color pulse. However, it did not provide the microscopy origin of the nonlinearity. For the same FWM model, the third–order susceptibility tensor gives different results on the THz polarization60, 62. And then, Kim et al. proposed a plasma current model to explain the mechanism of THz generation63, 64. Some papers have well explained the current model53-55, 65-67. In this model, when the symmetry of the bipolarity in the total laser field is broken, an electron current arises during the ionization, and results in THz emission. The total laser field containing the FW and SHW with the same polarization can be written as
here
is the duration of FW. With two-color fields, the molecular have been ionized in air. The ionization rate can be given by
here
is the atomic frequency.
is the atomic field,
is the Planck’s constant. With the time of ionization, the increases rate of free electrons can be written as
here
denotes the electron density.
is the initial electron density. The velocity at time
can be written as
here
is the ionization instant when the electron is born.
is the phenomenological collision rate
. The electron current can be given by
and the generated THz field is given by
Recent reports reveal that both the FWM and photocurrent models work in the THz generation from the two-color induced plasma68, 69, note that plasma conversion usually prevails over Kerr response once photoionization sets in.
Characteristics of THz wave generated from laser-induce-gas plasma
Compared with the physical mechanism of THz generation from laser-induced plasma, more efforts have been put into improving the performance of THz wave, including THz amplitude/conversion efficiency, spectrum, polarization, and spatial distribution.
THz amplitude/conversion efficiency
Many attempts have been put on to enhance the THz amplitude/conversion efficiency by means of external DC electric field, length of the filament, focusing condition of the pump pulse, wavelength/harmonic component of the pump pulse, and other optical parameters of laser pulses.
Since the THz signal emitted from the plasma induced by a single-color pulse is rather weak, an external DC based electric field has been exerted on the plasma induced by a single-color pulse. The schematic of the typical experimental setup is shown in Fig. 6(a)70. In this work, a model based on transition-Cherenkov was used to explain the experimental results. When an external DC based electric field was brought to the ionized plasma region along direction X, the current leading to THz wave can be written as
Figure 6.(a) Schematic of experimental setup for THz generation based on external electric fields in single color plasma and (b) experimental results. Figure reproduced with permission from: (a) ref.70, American Physical Society; (b) ref.71, The Optical Society.
here,
is the plasma frequency,
is the external statistic electric field. With this relation, this model predicts a relation of the radiated THz energy to the applied field as
here,
is the radius of plasma. The enhancement of THz is also considered as a result of the increase of second harmonic current when there is an external DC electric field in the plasma region71. With this increased second harmonic current, the enhanced THz wave was explained via the magnetic vector potential and scalar potential. In the experiment, above 1000-fold enhancement of the radiated THz energy has been observed, when a static electric field exerting on the plasma. The experimental results are shown in Fig. 6(b). Additionally, there are other electric fields exerting technology and theoretical explanations for this THz generation from the DC based plasma72-74.
Since the laser beam is focused to form a plasma which emits THz waves, the number of filaments has been considered as a way to increase the energy of the output THz waves. Two filaments75-77 or even filament array78, 79 have been formed in the experiments with the technology of coherent syntheses. The radiated THz wave is about 1 order of magnitude more intense than that from a single-filament under the same experimental condition.
It is noted that the length of the plasma can modify the THz field generated from the two-color pulse induced plasma, in which the filamentation process was tailored80. Therefore, the approaches of increasing the length of plasma to increase the THz signal have also been investigated81-84. In their experiments, they observed that THz amplitude increased with the length of the plasma channel.
It is well known that the plasma can be formed by focusing laser pulses. Therefore, the focusing conditions were considered for getting intense THz radiation. K. Liu et al. demonstrated that a 5.3-time enhanced THz pulse energy was observed when the plasma was formed by abruptly autofocusing laser beam85. The feedback wave front was manipulated to get the best focus to enhance the THz radiation, in which a 6 folds improvement was obtained86. A cylindrical lens was used to focus the femtosecond pulse to avoid plasma-induced laser defocusing and subsequent THz saturation87. The results showed that the energy conversion efficiency is of
, about 7 times better than the spherical lens focusing. In addition, there are other reports about the contribution of the focusing condition on the THz radiation enhancement88-91.
The parameters of the femtosecond pulse are important factors to be used in increasing the energy of THz radiation. Conventionally, pulses of the FW at 800 nm and SHW at 400 nm are used to induce plasma and emit THz wave. In the scheme of THz generation from the plasma induced by two-color pulse, the electric current obtains a drift velocity that scales linearly with the wavelength of laser pulse (
). It was reported that the THz energy scales as
or
. A. Nguyen et al. reported THz energy scaling like
with large exponents
, which departs from the growth in
expected from photocurrent theory56. Although the scales are not coincident, the results show that a longer laser wavelength is desirable to get higher energy. Efficient THz generation from air plasma via mid-infrared coherent control has been investigated experimentally and theoretically92-95. In 2020, it was demonstrated that two-color plasma induced by femtosecond mid-infrared laser pulse at 3.9 μm can generate THz wave with sub-mJ energy and the THz conversion efficiency is about 2.36%96. The record of 2.36% is partly due to the change of pump polarization. Using the circularly-polarized two-color pulse can increase the THz energy yield97, 98. Another possibility for increasing THz yield is to increase the number of colors65, 67, 99. The harmonic component involved in the formation of plasma is also an important factor for the enhancement of THz generation100-102. It was shown experimentally that the efficient THz occurs at the condition of new rations of
or 2 : 3, which are the uncommon frequency ratios in the two-color scheme103 can be achieved. Chirped pulse104, 105 and carrier-envelope phase106, 107 are also the parameters of femtosecond pulses to enhance the THz energy.
THz spectrum
As described above, the THz signal generated from air plasma induced by one-color pulse is rather weak, leading to a low signal noise ratio (SNR). Accordingly, its Fourier-transformed spectrum is with low SNR too. To demonstrate the spectrum of THz wave generated from plasma induced by one-color pulse, the external electric field was applied in the plasma region70. In the experiment, the THz signal was characterized by a plasma-based technology108, 109. The results are shown in Fig. 7(a). It can be seen that the SNR in the THz spectrum is still quite low although an external electric field is exerted on the plasma region. It also shows that the bandwidth of the spectrum spans to ~10 THz. Moreover, the spectrum of THz wave generated from air plasma induced by two-color pulse was also measured. In the experiment, the THz spectrum was measured by Fourier-transform infrared spectrometry. The result is shown in Fig. 7(b)110. It can be found that the THz spectrum spans to ~20 THz with a higher SNR. Though different detection methods were used in characterizing the spectrum of THz wave generated from air plasma, the results show that under the same experimental conditions the spectrum of THz wave generated from air plasma is wider than that from other optics-to-THz methods, which may be owing to the lack of quantum absorption in air plasma. Additionally, the results show that the spectrum of THz wave generated from plasma induced by two-color pulse is wider than that by the one-color one.
Figure 7.THz signals generated from air plasma induced by (a) one-color pulse and (b) two-color pulse. Simulation result is shown by the red line in (a). Figure reproduced with permission from: (a) ref.70, American Physical Society; (b) ref.110, under a Creative Commons Attribution licence.
Usually, a formed plasma emits THz pulses with a fixed spectrum, modulated THz spectrum may provide more potential applications. Many attempts have been tried to modify the profile distribution of the radiated THz spectrum111-113. As an easy and practicable way, the temporal coherence of THz pulses has been considered to be utilized in modifying the output THz spectrum114. In experiments, the THz waves were generated by two optical paths, in which the femtosecond pulses were controlled to induce plasma separately. By adjusting the time delay between the pulses in two paths, the superposition of THz waves generated in two paths resulted in modulated spectra. After that, the wavefront of the femtosecond pulse was controlled by the method of inserting a fixed phase plate, which subsequently manipulated the profile distribution of the radiated THz spectrum80. Recently, Y. Zhang reported a simple and energy-saving method for actively modulating the output THz waves spectrum with a liquid crystal spatial light modulator (LC-SLM)115. The LC-SLM actively controls the wavefront of femtosecond pulses and facilitates the replacement of the fixed phase plate. The schematic of the experimental setup and results are shown in Fig. 8. In the experiment, two focuses are formed and adjusted by the phase distribution on the SLM to induce two serial plasmas with spatiotemporal intervals. With this proposed method, the modulation of THz spectrum has been observed and the amplitude dip has been manipulated, as shown in Fig. 8(b). Filamentary gratings have also been demonstrated as a frequency modulator116. Additionally, the spectrum of THz radiation can also be controlled by tailoring two-color laser beams117.
Figure 8.(a) Schematic of the experimental setup and (b) results of actively modulated THz spectra. Figure reproduced with permission from ref.115, The Optical Society.
Polarization of THz radiation emitted from plasma has been initially investigated in the aspect of measurement and characterization. In 2007, D’Amico observed that the plasma induced by single-color pulse emits radially polarized THz waves57, as shown in Fig. 9. In the measurement, a metallic grid polarizer was used to detect the polarization of emitted THz waves. From the figure, it can be found that the radiated THz wave is radially polarized. The radial polarization has also been observed in ref.118. So far, the radial polarization of THz radiation from plasma induced by a single-color pulse is universally accepted.
Figure 9.Polarization of THz forward emission measured atθ= 10°. The experimental and simulation THz signals are denoted with black and red dots. Figure reproduced with permission from: ref.57, American Physical Society.
For the case of THz wave from plasma induced by two-color pulse, the process of condition is rather complicated. In 2009, the polarization of THz waves from plasma induced by two-color pulse has been investigated experimentally and theoretically119. It was shown that the polarization of THz wave is linear when both the pulses of FW and SHW are linear polarized. The THz radiation generated by circularly-polarized pump waves (FW and SHW) with the same helicity may be observed not linearly polarized in the experiment, which is out of the expectation of plane wave theory. It owns to the spatial alignment and non-collinear propagation of the two-color pulses98. The mechanism of elliptically polarized THz wave generation in femtosecond two-color induced plasma has also been investigated120-122. After that, the research on the polarization of THz radiation from the two-color pulse induced plasma has been turned to controlling123-125. Various polarization of THz wave can be realized via modifying the polarization of laser pulse or external electric field. By exerting a helical electric field on the plasma region, an elliptically polarized THz signal was observed126. By using a cross-DC biasing approach, the polarization of THz waves can be freely varied from linear to elliptic with arbitrary ellipticity127. By individually controlling the polarization of the pulses of FW and SHW beams, the plasma induced by two-color pulses can also emit THz signal with linear-to-elliptical polarization128. By inducing the circularly polarized femtosecond pulse to form plasma, elliptically polarized THz waves radiation have been observed129.
Spatiotemporal distribution
Great efforts have been put into the investigation of the spatial distribution of THz wave generated from the laser induced plasma. For the scenario of single-color, the spatial distribution is commonly believed to be conical. But in the case of two-color, the spatial distribution may be rather various, including bell-shape, conical shape, and ring-shape. In the early time of the exploration, the observed results mostly depend on the detection methods used in the experiments, including line scanning, raster scanning, and CCD array detecting.
H. Zhong induced the technology of line-scanning into heterodyne detection of THz waves130. In the experiment, a metal slit with a width of 2 mm was moved vertically in a plane before the lens. Combining with the technology of electro-optical (EO) sampling, the angle distribution of the THz radiation was measured. The experimental result shows that the THz intensity profile in the cross section is a Gauss-like type. The angle distribution of THz generation from laser induced plasma was also measured by the technology of line scanning and Michelson interferometer68. The measurement for the frequency-angle spectra of THz radiation was performed by moving a 1.5 mm slit across the diverging THz beam. The measured angle distribution of THz wave exhibits a maximum at about 4°~6° relative to the propagation axis. The off-axis maximum in the angle distribution corresponds to a ring-shape. At the same time, the experimental result was simulated by the non-propagating plasma fluid model. Both the experimental and simulation results show that 15% of the THz energy propagates on the axis and 85% in the region of ring.
The technology of line scanning is easily operated and time-saving, but if this technology is used in the measurement of the spatial distribution, the obtained results cannot reveal the real THz spatiotemporal distribution, because the obtained signal is the integration of the unblocked individual signal values. In 2009, with the technology of raster-scanning, R. A. Akhmedzhanov measured the spatial distribution of THz radiation from two-color pulse induced plasma131. In the experiment, the spatial distribution was scanned by moving a field stop in a transverse plane. The obtained intensity distribution is bell-shaped. It was explained by the self-phase modulation of a laser pulse with high intensity propagating in a plasma. The spatial distribution of THz radiation from two-color pulse induced plasma was also investigated by a raster scanning pyroelectric detector132. In the experiment, a silicon wafer is used to filter out the unwanted optical and infrared light. Filters were used to characterize THz profiles at different frequency bands. The measured far field THz profiles are donut-shaped, as shown in Fig. 10. In this work, the dephasing length is about 22 mm. As shown in Fig. 10(a), the plasma length is shorter than the dephasing length, so that all THz waves constructive interference in the forward direction, concentrating THz radiation on axis. Fig. 10(a) and 10(b) are from a plasma with the length of 10 mm, 10(c) and 10(d) are from a plasma with the length of 40 mm. 10(e) and 10(f) are simulated THz profiles for a plasma with the length of 40 mm. 10(a) and 10(c) show the profiles of THz waves at low frequency owing to a Teflon filter, while 10(b) and 10(d) show the profiles of THz waves at high frequency owing to a germanium filter. All figures show that the far-field THz radiation profiles are doughnut–shape in the THz frequency range. Additionally, an off-axis phase matched model was utilized to simulate the radiated THz spatial distributions. The doughnut-shaped distribution of THz radiation from two-color pulse induced plasma by the technology of raster scanning was also demonstrated in ref.133. Compared with the technology of line-scanning, the raster-scanning technology is more accurate in obtaining the THz spatial distribution. The accuracy of the measurement depends on the size of the stop. The small size will lead to more accuracy measurement results under the same experimental condition. However, if the size of the stop approaches mm or sub-mm, the diffraction effect will be obvious, resulting in errors in the measurement. Additionally, the raster scanning technology is time-consuming, which is a challenge to the stability of the experimental system.
Figure 10.Measured and simulated far-field THz radiation profiles. Experimental results (a–d) were obtained by raster scanning of a pyroelectric detector with a silicon filter. (a) and (b) are from a plasma with the length of 10 mm. (c) and (d) are from a plasma with the length of 40 mm. (a) (c) Teflon and (b) (d) germanium filters are used for low and high frequency transmission. (e) and (f) are simulated THz profiles for a plasma with the length of 40 mm. Figure reproduced with permission from ref.132, American Physical Society.
In 2014, a THz camera with the bandwidth of 1–7 THz was used to capture the THz intensity profile134. The recorded THz images are shown in Fig. 11. In the unfocused intensity profile shown in Fig. 11(a), it can be found that the THz intensity pattern in the far-field is in the form of a donut-shaped profile, and it evolves into a spot after being focused, as shown in Fig. 11(b). With the series of intensity profile images recorded by THz camera, a 3D THz profile has been obtained. Recently, with the technology of THz focal-plane imaging135, 136, E. L. Wang measured the spatiotemporal distribution of THz radiation from two-color pulse induced plasma137. Compared with the above imaging technologies, the THz focal-plane imaging technology can provide more detailed information on THz images, including amplitude, phase, frequency, and even polarization. The schematic of the experimental setup is shown in Fig. 12. It is clear that the spatiotemporal distribution varies with the frequency as well as the length of plasma. A donut-shaped profile occurs in the lower THz frequency range. The results are shown in Fig. 13. Moreover, the length of plasma channel, focusing condition, pulse duration, or even the filter are important factors contributing to the spatial distribution of THz radiation138-140.
Figure 11.Intensity image recorded by a THz camera.(a) Unfocused THz intensity profile and (b) focused intensity THz profile. Figure reproduced with permission from ref.134, under a Creative Commons Attribution (CC BY) licence.
Figure 12.Schematic diagram of experimental setup for THz focal-plane imaging. Figure reproduced with permission from ref.137, under a Creative Commons Attribution 4.0 International License.
Figure 13.Intensity distributions of THz waves generated from plasmas with different lengths.THz images in the (a) time domain and (b) frequency domain. Figure reproduced with permission from ref.137, under a Creative Commons Attribution 4.0 International License.
Liquid water as a target to generate THz waves has been historically considered to be impossible owing to its significant absorption in the THz band141. Like the gas media, the fluidity of liquids makes it replenish quickly, which leads to a high damage threshold in the liquid target when it was irradiated by intense laser pulses. However, compared with the gas media, the liquid target has more than 3 orders of molecular equivalent cross section142. The above characters make it reasonable to expect the liquid to be a candidate for intense THz sources. In 2017, the broadband THz radiation from the plasma in liquid water has been experimentally demonstrated, which was also induced by femtosecond laser pulse143. After that, various experiments with different liquids and geometries have been investigated.
Physical mechanism for THz generation from laser induced liquid plasma
THz generation from liquid plasma induced by single-color pulse
Understanding the physical mechanism for THz generation from liquid target is essential for advancing THz aqueous sources. A diploe model based on the ponderomotive force is proposed to explain the THz generation from laser-induced liquid plasma144. A schematic of the dipole model, which shows the schematic diagram of the THz radiation process, is shown in Fig. 14. The laser pulse penetrates and is refracted at the air/water interface of the water film, and then ionizes water molecules at the focus. In the ionized region, the quasi-free electrons move towards the regions of lower electron density with the ponderomotive force. The ions keep relatively stationary owing to the relatively large mass. The density of ionized carriers keeps identical in the forward direction for the reason that the envelope of the laser pulse faster than the electron. Therefore, the electrons are accelerated backward, leading to a dipole structure and emitting THz waves. The THz intensity can be described as
Figure 14.Ponderomotive force–induced dipole model for THz generation from liquid water. (a) Schematic diagram of the diploe model for THz generation from the plasma in the water film. (b) Its simulation result. α, θr are the incidence and refractive angle for the laser pulse, β and θt are the detective angle and exiting angle for THz pulse. F and B indicate the forward and back propagation THz signals, respectively. Figure reproduced with permission from ref.144, AIP Publishing.
here
is the incident angle of laser pulse.
is the detection angle of THz wave.
and
are transmittance of the laser pulse and THz wave.
is the measurement angle related to the direction of the dipole.
is the exiting angle of THz waves.
is the absorption coefficient of THz waves.
is the energy of laser pulse, and
is the thickness of water film. With this model, THz intensities are simulated and normalized. As shown in Fig. 14(b), F and B indicate the forward and back propagation of THz signals, respectively. The symmetric pattern results from the symmetric structure geometry in the model. The simulation results support the observation of the THz intensity dependence on the laser incident angle.
In 2020, a two-dimensional dipole array model was introduced to illustrate the THz wave emission from water line145. In this model, the THz emission is considered as superposition of emission by a 2D dipole array, and expressed by
here E is the THz electric field generated from each dipole in the array.
is the angle between the observation point and the spherical coordinate axis. d is the distance between two adjacent dipoles. With this model, the dependence of THz peak electric field on the relative positional relation between the plasma and the water line was simulated. The simulation result agrees well with the experimental one.
In 2019, the mechanism of laser ponderomotive-force-induced current with the symmetry broken around the water-column interface was attributed to the THz generation from a liquid water line146. In this model, the THz radiation was considered to originate from a net current owing to the presence of the column interfaces. The currents distribute on two sides of the laser propagation axis, which were formed by the ponderomotive force. If the laser axis deviates from the water column center, the symmetry of the two currents will be broken. The generated THz electric field can be written as
where
is the width of the laser beam. This model implies THz strength scales linearly with the laser energy.
A theoretical model which describes the physics of ultrashort pulses has also been used in the THz generation from liquid water147, 148. In this model, the dynamics of the radiation field, the evolution of the current density of quasi-free electrons, and the dynamics of the concentration of electrons have been included,
where
,
, andn0 are the empirical coefficients characterizing the dependencies of the medium absorption and the refractive index. g characterizes the low-inertia cubic nonlinear response of the medium, j is a current density of quasi-free plasma electrons.
is excited states population of the medium molecules.
and
are times of relaxation from quasi-free and excited states.
and
are the efficiency of the transitions to the above states. z is the position of propagation. The schematic and simulation results of this model are shown in Fig. 15. The pump laser pulse propagates in the liquid and ionizes the liquid via multiphoton absorption. With the formation of the plasma channel, THz waves radiate in both directions, as shown in Fig. 15(a). The THz energy versus the pump pulse duration and liquid thickness was simulated, as the result shown in Fig. 15(b). For clarity, some typical data were abstracted from Fig. 15(b) to compare with the experimental ones. Both the experimental and simulation results show that the maximum generation efficiency of THz radiation varies with the liquid thickness and the pump pulse duration. With this model, the quasi-quadratic dependence of THz energy on the optical excitation has been revealed. Certainly, as a theoretical description via equations, the UPPE is also used to describe the THz generation from laser-induced liquid plasma149, which was utilized in the scenario of THz generation from air plasma.
Figure 15.Model of ultrashort pulses propagation equation and its simulation results. (a) Visualization of the model description, (b) simulation result of THz signal with different liquid thickness and pump pulse duration, and (c) comparison of experiment results with simulated results abstracted from (b). Figure reproduced with permission from ref.147, The Optical Society.
A unified model from the principle of electrodynamics was induced to explain both single/two color excitation of THz waves from a liquid150. In this model, both the ponderomotive force along the laser propagation axis and the drift current perpendicular to the laser propagation axis have been considered. The schematic diagram is shown in Fig. 16. The generated THz field can be logically written as
Figure 16.Schematic diagram of the particle dynamics in the unified theoretical model.ap and νd are the acceleration and drift velocity of electrons, respectively. They are related to the laser propagation direction and electron dynamics in the water medium. The electrons are accelerated forward and backward between the ascending and descending edges owing to the ponderomotive force. νd is perpendicular to the laser propagation direction. The combined effect of ap and νd results in THz generation in liquid water. Figure reproduced with permission from ref.150, AIP Publishing.
where
is the acceleration from the ponderomotive force,
is the drift velocity of electrons under an asymmetric field composed of the FW and SHW. The first term on the right-hand side is relative to the acceleration from the ponderomotive force, while the second one corresponds to the drift motion of newly generated electrons. With this model, the THz generation from the water film was well explained.
Properties of THz wave generated from laser-induced liquid plasma
Great efforts have been put into the improving the properties of THz wave generated from laser-induced plasma in liquid. Like the case of the air, different liquids and excitation geometries have been investigated for the excitation. THz intensity, spectrum, and polarization are also included in the concerned properties of the liquid sources.
THz intensity
To get intense THz wave from liquid, the crucial factors affected THz generation, including the optimal angle of optical incidence, optimal pulse duration for optical excitation, and geometry parameters of liquid, have been investigated.
Optimal angle of optical incidence. The dependence of THz intensity on the incidence angle of optical pulses was measured in the experiment of excitation of liquid water films, the results are shown in Fig. 17. The blue dots and black squares denote the data measured by a Golay cell and EO sampling, while the red line denotes the simulation results. B and F represent the back and forward propagation signals. It is clear that the optimal incidence angle is independent of the water thickness. Apart from it, about ~80% of energy is dissipated when
, due to the total internal reflection at the surface and the absorption of water. It can be found that the optimal angle of optical incidence is
, which was owing to the results of the transmittance of the p-polarized excitation laser at the air/water interface and the dipole direction. A similar result is also observed when a water line is used as a THz source. In these experiments, the optimal incidence angel depends on the asymmetry optical excitation, project of dipole component in x direction and total internal reflection of THz wave at the liquid/air interface144, 145.
Figure 17.THz intensity versus incidence angle α for different detection angle β, (a) β = 0° and (b) β = 55°. The blue dots and black squares denote the data measured by a Golay cell and EO sampling, while the red line denotes the simulation results. F and B represent the forward and back propagation signals. Figure reproduced with permission from ref.144, AIP Publishing.
Optimal pulse duration of optical excitation. In the case of THz generation from air plasma, the dependence of THz amplitude on the laser pulse duration has been explored in many works54, 151. It is found that the THz amplitude increases with the increasing of the laser pulse duration at low laser intensity, while decreasing with the increasing laser pulse at a high laser intensity, in which the ionization events play an important role151. This dependence was also explored in the case of THz generation from liquid plasma. It was observed that from either water film or line, the optimal pulse duration for THz wave generation is in the order of sub-picosecond143, 147, 148, 152. This observation results from the dependence of plasma formation in water on the optical pulse duration, in which the electron density (corresponding to the pulse width) plays an important role153.
Geometry parameters of liquid. The diameter of the water line is also considered in the contribution to the generated THz signal. It was demonstrated that the strongest THz wave generates when the diameter of the water line is in the range of 0.1–0.2 mm145, 152. The preference of the diameter range was simulated by the model of electromagnetic wave propagation equations, and it was attributed to the changed pulse duration in water, which results in the enhanced THz signal153.
Energy of laser pulse. The dependence of THz electric field strength on the energy of laser pulse has also been investigated. In most of the experiments, the linear dependence of THz intensity on the energy of laser pulse was observed before the saturation of THz signal144, 146. However, there are measurements revealing that the THz energy scales quasi-quadratically with the optical pulse energy146, 147, 154. The difference of the observed dependence may result from the liquid target geometry and the excitation energy of the laser pulse. It is noted that the THz energy generated for the single-color induced plasma in liquid is more than that in air, given it under the same experimental conditions.
Spectrum
The spectrum of THz wave generated from liquid plasma was characterized by Fourier-transformed time domain signal. It was found that the bandwidth of THz wave is narrower than that of air plasma (tens THz)155, 156. It shows that there is an obvious diversity in the frequency component profile of the THz wave, where the high frequency is more than that of the low frequency, as shown in Fig. 18. When the pulse width increases from 50 fs to 300 fs, the difference of spectrum characters becomes inconspicuous. This inconspicuous difference results from the decreased energy of SHW pulse at a longer duration, which make the effect of SHW pulse insignificant.
Figure 18.Spectra of THz waves generated from a 120 μm thick water film with one-color (black line) and two-color (red line) excitation schemes in the case of the pulse duration of (a) 50 fs and (b) 300 fs. Figure reproduced with permission from ref.155, 156, AIP Publishing.
Apart from the water, other liquids have been used as the target in the THz generation from liquid plasma, such as
-pinene, p-xylene, and ethanol147, 153. The spectra of THz waves generated from
-pinene and water are shown in Fig. 19. It is clear that the spectrum of THz waves generated from
-pinene has more high-frequency components and a wider bandwidth. The refractive index and absorption of
-pinene are contributed to the difference and shown in the inset. Besides that, the material-related function in the ionization process is also a contributor to the discrepancy. THz spectra width has been specially investigated with different liquid targets149. It shows that 99.5% of the spectral power lies between 0.1–50 THz for air, 72% and 64% of the spectral power for acetone and ethanol, respectively.
Figure 19.Spectra of THz waves generated from α-pinene and water. Figure reproduced with permission from ref.153, under a Creative Commons Attribution 4.0 Unported License.
For the THz generation from liquid plasma, the effort on THz polarization is not so much as the case of air plasma. Further exploration on polarization is limited, maybe owing to the complicated configuration and geometry. Only one experimental and theoretical investigation showed that the THz wave is alwaysp polarized whether the optical exciting pulse is s orp polarized146.
THz generation from laser-induced-solid plasma
Intense THz radiation is always pursued due to its numerous applications. As described above, overcoming the damaged problem make plasma a promising medium to produce THz radiation. However, the way to further enhance the THz yield by increasing the pump laser intensity is always blocked. The saturation of the ionization current will occur if the laser intensity is up to
. Currently, the peak intensity of an ultra-intensity laser pulse can be above
, which is commonly called relativistic laser157, 158. At this level, the electron quiver velocity in the laser field approaches the light speed. Under this experimental condition, the plasma without saturated ionization current from a target is desirable.
Compared with the media of air and liquid, a higher density of electron can be obtained from the plasmas of solids. Furthermore, the solids can endure the higher intensity of laser pulse. Hamster et al. observed the THz emission from aluminum thin foils with the pump laser pulses at relativistic intensity
159, 160. At present, intense THz pulses with energy up to tens of mJ have been observed from the relativistic laser pumping solid targets. There is no evidence showing the saturation of THz signal even the pump intensity is up to
161. Although intense THz wave can be obtained in the way of relativistic laser-solid interaction, the involved mechanisms are rather complicated and are still in exploration.
Physical mechanisms for THz generation from laser-induced-solid plasma
THz generation from plasma wave
When the laser pulse propagates in the plasma, its energy is coupled to the plasma via resonant absorption. In this process, a plasma wave with a large amplitude is excited, also called as laser wakefield. This electrostatic plasma wave happens at the critical density where the frequencies of plasma and laser are nearly equivalent. This electrostatic plasma wave can be reversed to electromagnetic wave if some conditions are required162. In unmagnetized plasma, the dispersion relations for the electrostatic and electromagnetic wave are expressed as
and
, respectively. It is obvious that the electrostatic wave can be efficiently converted to the electromagnetic with the conditionsk=0 and
, as illustrated in Fig. 20(a)163. In the plasma with homogenous density, the wave number of the electrostatic wave
,
and
are the frequency of plasma and group velocity of laser. Hence the linear conversion cannot occur in the plasma with homogenous density. In the plasma with inhomogeneous density, the wave number of electric static varies with its spatiotemporal distribution, which makes it possible to convert the electric static wave into the electromagnetic wave. Apart from the condition of k=0, the incidence angle of the laser to the inhomogeneous plasma must be considered.
Figure 20.(a) Dispersion curves of plasma waves and electromagnetic waves and (b) Cerenkov wake radiation. vb is the velocity of the disturbance that creates the wake in the medium. Figure reproduced with permission from: (a) ref.163, IEEE; (b) ref.164, American Physical Society.
The electrostatic wave is a longitudinal wave, while the electromagnetic wave is a transverse one. If they propagate in the same direction, the linear conversion cannot occur. Thereafter, when the intense laser pulse irradiates obliquely to an inhomogeneous plasma with under density, the projected components of both electric fields are partially in parallel. The THz wave can be emitted from the electrostatic wave in the specular reflection direction. Liao et al. observed the intense THz radiation generated from plasma wave165. Based on this theory, the observation was explained by the excitation via the stimulated Raman scattering and self-modulated laser wakefields.
In the magnetized plasma, the transverse motion of the electron is formed by the Lorenz force and induces a transverse current, which makes the magnetized wakefields convert partially into the electromagnetic wave, with a frequency closer to the frequency of plasma, which is commonly called Cherenkov wake radiation164. The geometry of the external B field compared with the propagation axis of the exciting source is illustrated in Fig. 20(b).
THz generation from electron transport
When the pump laser intensity is above
, the typical density of the induced plasma can arrive
. In this scenario, the intense laser can break the wakefield oscillation, which leads the wakefield-based emission mechanism will not work166. When the relativistic laser irradiates on the solid target, the electron generated in the laser-plasma interaction will be accelerated and transported in a short time scale, which produced a time-varying transient current to radiate electromagnetic waves. This radiation is believed to be responsible for the radiation in the infrared and THz spectra range. The electron transports in longitudinal and lateral directions. If a relativistic laser pulse interacts with an over dense plasma from the solid target, the joint contribution of light pressure and electrostatic restore force creates the longitudinal motion of bunches of electrons, and radiates intense THz pulse167. Apart from the longitudinal electron transport, the lateral transport has also been observed168, 169. In the experiment, the longitudinal transport was excluded because it exists in the high-density region and THz wave cannot escape from this region. The lateral current has been validated by the 2D particle-in-cell simulation, which is informed by electrons propagating near the target surface owing to the confinement of the spontaneous quasi-static magnetic and electrostatic fields at the surface170, 171. In the simulation, the p-polarized laser pulses irradiate on the front target surface at an incidence angle of
as shown in Fig. 21(a), the density of the plasma slab is 6 nC, where nC is the critical density. Thus, there is a surface current at the vacuum-plasma interface along the y-direction at time of 50, 60, and 70 laser cycles, as shown in Fig. 21. It can also be found that the current flows in the y-direction with time. Consequently, the lateral electron transport is contributed to the THz radiation. With this mechanism, a self-organized fast electron current model is proposed to explain the observations.
Figure 21.Electron current distributions at the surface of solid target obtained from 2D particle-in-cell simulations. (a), (b), and (c) are the cases at the time of 50, 60, and 70 laser cycles, respectively. Figure reproduced with permission from ref.169, AIP Publishing.
When laser pulses are irradiated on a solid target with a moderate density gradient at a small incidence angle, the emitted THz waves show different features172. Two types of transient current driven by either the laser ponderomotive force or two-plasmon decay (TPD) have been analyzed. The experimental results of TPD are shown in Fig. 22. In the experiment, a laser pulse at the wavelength of 800 nm was used to irradiate the target, the spectrum of the scattered light contains
and
components as shown in the upper-left inset of the figure, where
is the laser frequency. When the laser contrasts are changed, the THz energy is independent of the
component, as shown in another inset of the figure. During this THz radiation, the THz energy scales linearly with the intensity of
signal. Since the
component is an indicator for TPD instability, the transient current included by TPD is determined via the
component. The results show that the transit current induced by TPD is responsible for the observations. With the theory of lateral transport of electron, the radiation energy with frequency was also explained173.
Figure 22.Relation of the 3/2ω0 signal intensity of the scattered light with the THz energy. Figure reproduced with permission from ref.172, AIP Publishing.
When the relativistic laser pulse is irradiated on the solid target, there is a scenario that THz radiation is emitted from the target rear surface. For the case of THz radiation from the target front surface, it is a result of the direct interaction of the NIR laser pulse with the foil, where the surface current is formed by the motion of electrons from the plasma. However, in the case of THz generation from the target rear surface, the THz dynamics are different. There are mainly two mechanisms involved in the dynamics, coherent transition radiation (CTR) and sheath radiation (SR).
Transition radiation is produced by an electron bunch passing through a metal foil. The electron was accelerated by the laser wakefield to have enough kinetic energy to escape the target. When the electrons transit the plasma-vacuum boundary, they will induce a lateral polarization current owing to the dielectric discontinuity172, 174. This current gives rise to the THz radiation. The THz radiation induced by one electron is weak. However, during the transition radiation, the electron bunch length is in the order of 10 μm and shorter than the emitted THz wavelength. According to the relation of the bunch structure with the radiation wavelength175, 176, the transition radiation from the electron bunches becomes coherent, with a power proportional to the square of the number of electrons. The CTR process is illustrated in Fig. 23(a).
Figure 23.Schematic diagrams of two main mechanisms for THz generation from plasma emission.(a) Coherent transition radiation and (b) sheath radiation. Figure reproduced with permission from ref.175, under a Creative Commons Attribution (CC BY) licence.
As the electrons escaping the target surface, a strong charge separation field with the behavior like a dipole is formed owing to the electron dynamics. The separation field is comparable to the peak electric field of the laser pulse, and accelerates the positive protons to a very high energy, resulting in electromagnetic emission. Because the evolution time scale of the separation field is in the order of picoseconds177, the emitted electromagnetic waves are in THz band. The THz field is correlated with the square of the numbers of protons. This is so called target sheath acceleration (TNSA), as illustrated in Fig. 23(b). In order to form a quasi-static field accelerating ions over ps time scales, the sheath radiation needs the go and back motions of less energetic electrons from the rear of the target.
There are many more complicated physical processes are involved in the relativistic laser-solid interaction, especially in the case of submicron solid target. By analyzing the fields emitted by longitudinal and transverse currents, J. Dechard et al. reveals that the THz emission consists of CTR and antenna-type emission, in which the first one results the recirculation hot electrons, while the second one results from the shielding of electron currents178.
Characteristics enhancement for THz wave generated from laser-induced solid plasma
THz intensity
As expected, the scheme of laser-solid interactions can provide intense THz waves, the focus of this scheme is mostly on the THz enhancement. By optimizing the preplasma scale length, extremely broadband THz bursts with energy of above 100 μJ/sr in the laser specular was observed165. For the CTR, energetic electron bunch with both high charge density (nC-μC) and short duration (fs-ps) will provide high THz radiation energy. The THz energy about 3~5 nJ over a collection angle of 30 mrad was experimentally demonstrated when the 1.5 nC electron bunch was used179. It is predicted that the THz energy will be enhanced to mJ-level by increasing the energy of electron beam and the transverse size of plasma180, 181. By irradiating the foil targets with femtosecond or picoseconds laser pulses, the THz energy of ~400 μJ and ~50 mJ have been demonstrated experimentally182, 183.
For the TNSA, the THz pulses with energy of 460 μJ have been observed experimentally at the rear surface of a thin metal foil176. Target structure is also considered to enhance the THz energy via increasing the laser absorption. It is predicated that the targets with gratings or multilayer structure can emit more THz energy than a flat target184. This structured target was used in the experiment, in which 10-fold of enhancement of THz energy has been observed from a thick planar target with deposited copper nanorod arrays185.
Spectrum
By changing the parameters of plasma and laser pulse, the backward THz radiation from solid targets in the presence of the preplasmas has been widely investigated169, 172, 173, 186, 187. The results show that the low-frequency radiation will emit under the conditions of a larger laser incidence angle and a steep plasma density at the target surface, while the high-frequency one corresponds to the conditions of a smaller incidence angle and a moderate plasma density.
Polarization
The polarization of THz pulse from the laser-solid interaction is still in exploration. Radially polarized THz pulse has been observed from the rear surface of a thin foil irradiated by laser pulse176, 188. By focusing radially polarized THz fields from the laser-irradiated thin foil, longitudinal polarized THz pulse has been observed189.
Summary and outlook
In this paper, the focus is mainly on an overview of mechanisms and properties concerning the generation of THz radiation from laser-induced plasma in air, liquid, and solid. For the scenarios of THz generation from laser-induced plasma in air and liquid, only the cases of pump laser pulse in the nonrelativistic region are involved. For the scenario of THz generation from laser-induced plasma in solid, only the cases of the irradiated laser pulse in the relativistic region are involved. There are some cases excluded in this paper, such as pumping liquid nitrogen, metal (Hg, Ga) and pumping air with relativistic laser pulses. There are many significant works on the relativistic interaction to THz energy yields from air plasma190, 191, and they are not reviewed in detail owing to the length limitation of this paper. For the mechanisms of THz generation from the laser induced plasma are overviewed, it was divided according to the pump laser fields, as one/two color. Since THz generation from laser-induced plasma is an increasingly active research field, it is inevitable to cover all relevant reported mechanism in this paper. For the properties of THz generation from laser-induced plasma in three medias, the THz energy/efficiency, spectrum/bandwidth, polarization, and angular distribution are reviewed separately in corresponding sections. A comparison of THz generation from laser-induced plasma in three media is shown in Table 1.
In terms of THz generation from laser-induced plasma in gas, its THz signal is larger than that from the effect of optical rectification of crystals, which is commonly used in the THz time domain spectroscopy. However, the SNR is worse than that of the effect of optical rectification of crystal. Hence, the performance of SNR should be improved. The spectrum of THz radiation from the laser-induced-air-plasma can be broadened to ~100 THz, thus, it is frequently used in the ultrabroad absorption spectrum measurement of a sample. However, the solution and bandwidth of the spectrum depending on the detection method. Therefore, both the performance of SNR and detection method should be addressed for its wide applications. It is well known that the two-color scheme of THz radiation from laser-induced plasma in the air is very popular to generate THz waves in labs. Its mechanisms and corresponding boundaries of validity are still in exploration. If they are established, it will help to deepen the understanding of the physics of THz generation from plasma. It is well known that the wavelength of THz is shorter than that of MW, leading to its advance of imaging resolution. However, the conical THz radiation form laser-induced plasma in gas characters a hollow distribution in the far-field. The hollow distribution may be modified by reshaping the THz pulse, or controlling the wavefront of laser pulse to directly generate THz wave with solid-core distribution.
In terms of THz generation from laser-induced plasma in liquid, its plasma density is higher than that from the gas which induces a higher THz signal than that from gas with the same condition of pump laser power. However, the THz field is not scaled with the electron density. It is out of expectation and maybe owing to the absorption of THz waves by liquids. Unlike a string plasma induced in gas, the length of plasma induced in liquid is rather short, meaning the number of electrons contributed to THz yield is not much. Therefore, increasing the length or volume of induced-liquid-plasma and decreasing the absorption of THz wave are important for enhancement of THz wave in the scheme of liquid. For the corresponding mechanisms, most of theoretical models are based on plasma in the gas. It is known that there are many differences in the dynamics of liquid and gas. Therefore, innovative theories on these mechanisms are expected, which will help to understand the physics in depth. Compared with the THz generation from gas and solid, the THz generation from liquid is rather new, and the obtained results are not sufficient. The justification of the models may depend on the further research results. As described in the section of THz generation from laser induced plasma in gas, many attempts have been put on increasing the THz yield or broadening its spectrum, including modifying target geometry, pumping with different wavelength of laser pulse, external electrical field, and controlling the electron density and dynamics. These attempts can also be applied on the scenario of THz generated from laser-induced plasma in liquid.
In terms of THz generation from laser-induced plasma in solid, energetic THz waves are always generated from the solid plasma. However, the samples were excited by laser pulse in single-shot mode, meaning refreshment of solid target after each shot. The output THz efficiency is limited by the degradation of the solid target. Therefore, replenishing of energetic electrons is required to match the repeat rate of the exciting laser pulse. As described above, the electron bunch charge and bunch duration limit the THz peak power. Hence, one can expect energetic electric bunch (nC-μC) and short bunch duration (fs-ps) to get high peak power THz waves. As a new THz source, the THz radiation from the laser-induced plasma in solid is still in exploration. The validated mechanisms and tunable properties including spectrum, polarization, and angular distribution will be feasible.
Table 1. Comparison of THz generation from laser-induced plasma in gas, liquid, and solid.
Table 1. Comparison of THz generation from laser-induced plasma in gas, liquid, and solid.
Gas
Liquid
Solid
Configuration
Atmosphere
Film, line, droplet
Foil, bulk
Laser excitation intensity
Nonrelativistic
Nonrelativistic
Relativistic, >10 18 W/cm2
Excitation field
One/two-color
One/two-color
One-color
THz field
>100 MV/cm96
~MV/cm149
~0.8 GV/cm183
Conversion efficiency
2.36%96
>0.1%149
~0.1%183
THz energy
0.185 mJ96
76 μJ 149
~2.3 mJ183
THz bandwidth
>50 THz96
~100 THz149
<20 THz183
Geometry
Easy
Complicated
Complicated
Laser pulse width
~fs
~ps
fs-ps
Detective THz yield
Forward/sideway
Forward/sideway
Forward/sideway/backward
In terms of the applications of THz radiated from the laser-induced plasma in three medias, it always drives the investigation going further and into depth. Since THz waves are directly from the plasma, they could serve as a useful diagnostic tool for the plasma wave, particle acceleration, and transport of electron during the formation of plasma. Since the THz fields generated from laser induced plasma in three medias are prevailing over other THz sources, there is ample scope for its abilities in the extreme THz science, especially the interaction of strong THz field and matter. It also plays important roles in the pump/probe technology, in which the THz wave can be employed to induce structural response of a sample. In addition, their distinctive applications should be in practice, for example, THz generation from laser induced plasma in the air is greatly expected to be used in the remote sensing, in which the propagation of THz wave is replaced with that of laser pulse to avoid the absorption of THz wave.
This work was supported by the National Natural Science Foundation of China (Grant Nos. 11774246 and 121774271), the National Key R&D Program of China (Grant No. 2019YFC1711905), the Beijing Talents Project (Grant No. 2018A19), the Sino-German Mobility Program of the Sino-German Center for Science Funding (Grant No. M-0225), the Capacity Building for Science & Technology Innovation-Fundamental Scientific Research Funds (Grant No. 00820531120017).
The authors declare no competing financial interests.
[46] [46] Hamster H. Generation of sub-picosecond terahertz radiation by laser-produced plasmas. (University of California, Berkeley, 1993).
[47] [47] Hora H. Laser Plasma Physics: Forces and the Nonlinearity Principle (SPIE, Bellingham, 2000).
Tools
Get Citation
Copy Citation Text
Wenfeng Sun, Xinke Wang, Yan Zhang. Terahertz generation from laser-induced plasma[J]. Opto-Electronic Science, 2022, 1(8): 220003