The coupled equation method (CEM) has been applied to investigating the resonance structures for the ground state 1s2 2s 2S of the neutral lithium from the first threshold up to 64.5 eV. Resonance structures of atomic lithium due to single excitations of the 1s and 2s electrons are studied by infinite-order calculations in detail. The effect of spin-orbit splitting is also included for some of the low-lying 1s 2s np resonance, and the influence of the interference between 1s 2s 3S np and 1s 2s 1S np states on the resonance structure has been confirmed theoretically. The results show that the presented technique can give the reasonable resonance structures very well in photoionization processes.

A new system of multi-channel single-output joint fractional Fourier transform correlator (JFRTC) for color pattern recognition is proposed based on the conventional system of multi-channel single-output joint transform correlator (JTC). The theoretical analysis and optical experiments are performed. With this method, one can obtain three correlation peaks at the output plane which show a pair of desired cross-correlation peaks and one auto-correlation peak. In comparison, the conventional system leads to more correlation peaks playing a noise role in color pattern recognition.

We propose a new method for image denoising combining wavelet transform and support vector machines (SVMs). A new image filter operator based on the least squares wavelet support vector machines (LS-WSVMs) is presented. Noisy image can be denoised through this filter operator and wavelet thresholding technique. Experimental results show that the proposed method is better than the existing SVM regression with the Gaussian radial basis function (RBF) and polynomial RBF. Meanwhile, it can achieve better performance than other traditional methods such as the average filter and median filter.

A novel optimization-based method for designing wavelet filter banks in image fusion is proposed. The filter bank design is formulated as a nonlinear optimization problem. The objective function of the optimization problem consists of both the performance metrics of the image fusion, such as the root mean square error (RMSE), and those of individual filters. The optimization problem is solved using simulating annealing.

The bias estimation of passive sensors is considered based on information fusion in multi-platform multi-sensor tracking system. The unobservable problem of bearing-only tracking in blind spot is analyzed. A modified maximum likelihood method, which uses the redundant information of multi-sensor system to calculate the target position, is investigated to estimate the biases. Monte Carlo simulation results show that the modified method eliminates the effect of unobservable problem in the blind spot and can estimate the biases more rapidly and accurately than maximum likelihood method. It is statistically efficient since the standard deviation of bias estimation errors meets the theoretical lower bounds.

A technique is described for the dynamic measurement of selected thermophysical properties of electrically conducting solids in the temperature range from 1100 K to the melting point. Based on rapid resistive self-heating of the specimen from room temperature to any desired high temperature in several seconds by the passage of an electical current pulse through it, this technique measures the pertinent quantities such as current, voltage, randiance temperature, with sub-millisecond time resolution. The pulse-heating technique is applied to strip specimens. The radiance temperature is measured by high-speed pyrometry, normal spectral emissivity of the strips is measured by integrating sphere reflectometry. The normal spectral emissivity results are used to compute the true temperature of the specimens. The heat capacity, electrical resistivity, total hemispherical emissivity are evaluated in the temperature range from 1100 K to the melting point.

A new method for testing aspheric surfaces by annular subaperture stitching interferometry is introduced. It can test large-aperture and large-relative-aperture aspheric surfaces at high resolution, low cost, and high efficiency without auxiliary null optics. The basic principle of the method is described, the synthetical optimization stitching model and effective algorithm are established based on simultaneous least-square fitting. A hyperboloid with an aperture of 350 mm is tested by this method. The obtained peak-to-valley (PV) and root-mean-square (RMS) values of the surface error after stitching are 0.433'lambda' and 0.052'lambda' ('lambda' is 632.8 nm), respectively. The reconstructed surface map coincides with the entire surface map from null test, and the difference of PV and RMS errors between them are 0.031'lambda' and 0.005'lambda', respectively. This stitching model provides another quantitive method for testing large aspheric surfaces besides null compensation.

A high repetition rate, compact micro-pulse all-solid-state laser is designed. The diffusion bonded crystal of YAG, Nd:YAG, and Cr4+:YAG is taken as a monolithic cavity. The optimized initial transmission, output coupling, and pumping size of Cr4+:YAG are calculated. The experimental results show that the laser satisfies the requirement of a spaceborne laser range finder.

We describe modeling the solid-state dye laser with the microcavity size comparable to light wavelength. Certain symmetry in the allocation of gain material leads to depletion of odd longitudinal modes that, in turn, increases the tunability range of the microlaser. We provide simple physical explanation for the modeling results.

A finite element model was constructed using a commercial software Fidap to analyze the Cu-base filler metal droplet spreading process in laser brazing, in which the temperature distribution, droplet geometry, and fluid flow velocity were calculated. Marangoni and buoyancy convection and gravity force were considered, and the effects of laser power and spot size on the spreading process were evaluated. Special attention was focused on the free surface of the droplet, which determines the profile of the brazing spot. The simulated results indicate that surface tension is the dominant flow driving force and laser spot size determines the droplet spreading domain.

We demonstrate the self-assembly of solution-processible gold nanoparticles into the nanoholes consisting of patterned substrate through annealing, which facilitates successful fabrication of square lattices of gold nanocylinders with a period of 350 nm, a height of about 200 nm, and an aspect ratio larger than 2.

The analysis of Y aperture element frequency selective surface (FSS) using the spectral domain method and the moment method is presented. With the vacuum depositing and photolithography, the corresponding Y aperture element FSS was produced, and it was tested in the microwave darkroom. The calculated and measured results are in good agreement.

Polarization independent bends and beam splitters for transverse electric (TE) and transverse magnetic (TM) polarizations have been demonstrated in two-dimensional (2D) photonic crystals (PhCs). In virtuel of equi-frequency contour analysis and finite-difference time-domain calculations, self-collimation behaviors for TE- and TM-polarizations are achieved at the same frequency. Simulation results show a 90-degree bend with 90% efficiency and beam splitters with about 96% total efficiency for both TE- and TM-polarizations, where the light is self-guided by the self-collimation effect. Such bends and beam splitters are expected to play important roles in optical devices where polarization insensitivity is needed.

The optimized method of extending the omni-photonic band gap (omni-PBG) was discussed based on analyzing the P-wave reflectivity characteristics in one-dimensional (1D) periodic multilayer film. A visible omnidirectional reflector with hybrid structure was designed using P-wave compensated overlapping in angle domain. The experimental result was in good agreement with the theoretical simulation.

A fiber taper can evanescently couple to whispering gallery modes (WGMs) in a planar silica microdisk for observing the optical properties of the microdisk cavity. It is revealed that WGMs have very high quality (Q) factors by controlling the air gap between the taper and the microdisk. The best coupling efficiency from the taper to the microdisk is as high as 98%, and can be continuously adjusted from the under-coupling, critical-coupling to over-coupling regimes. The influence of the laboratory circumstance such as surface contamination on the microdisk is also discussed. It is experimentally shown that the high-Q-factor (100000) modes can be kept for a long period in a general laboratory circumstance.

The interfacial Si nano-pyramid-enhanced electroluminescence (EL) of an ITO/SiOx/p-Si/Al metal-oxide-semiconductor (MOS) diode with turn-on voltage of 50 V, threshold current of 1.23 mA/cm2, output power of 16 nW, and lifetime of 10 h is reported.

By adopting noise initiation model of stimulated Brillouin scattering (SBS), the influence of phonon lifetime and gain coefficient of medium on power limiting characteristic is numerically investigated. Through using actual parameters of three media, CCl4, acetone, and CS2, the waveforms of transmitted pulses are simulated. The result shows that different media have little effect on the front peak of waveform, while have an obvious effect on the height of power limiting platform. When the medium which has short phonon lifetime and small gain coefficient is used, the height of power limiting platform is comparatively high. In experiment, by focusing 1064-nm, 8-ns, 18-mJ pulses into these three media, the waveforms of transmitted pulses are obtained. The experimental results are in good agreement with conclusions of theoretical simulations.

A photoacoustic (PA) spectrometer with H-type first longitudinal resonant cells for ammonia detection is developed. A new PA cell structure is designed to accelerate the drift velocity of the sample gas near the cell surface, so that the short response time at the flow rate of 100 sccm (standard cubic centimeter per minute) is achieved. The response time of 5 min and detection limit of 0.86 ppbv is reached for ammonia concentration measurement with a Teflon polytetrafluoroethylene (PTFE) cell. Further improvement could be expected when using a brass cell with a high quality Teflon fluorinated ethylene propylene (FEP) coating.

The influence of organic contamination in vacuum on the laser-induced damage threshold (LIDT) of coatings is studied. TiO2/SiO2 dielectric mirrors with high reflection at 1064 nm are deposited by the electronbeam evaporation method and their LIDTs are measured in vacuum and atmosphere, respectively. It is found that the contamination in vacuum is easily attracted to optical surfaces because of the low pressure and becomes the source of damage, O2 molecules in vacuum with contamination can accelerate the laser-induced damage by observing LIDT and damage morphologies. LIDTs of mirrors have a little change in vacuum compared with in atmosphere when the organic contamination is wiped off. The results indicate that organic contamination is a significant reason to decrease the LIDT in vacuum.