Photonic Sensors, Volume. 14, Issue 3, 240310(2024)

Fiber-Optic Bragg Grating Sensor for Photothermally Examinating Moisture of Meat

Xiaodong XIE1... Enlai SONG1, Ziyu YUAN1, Yi YIN1, Yongkang ZHANG1, Qiaochu YANG1, Zhiyuan XU2,*, and Yang RAN12 |Show fewer author(s)
Author Affiliations
  • 1Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Photonics Technology, Jinan University, Guangzhou 510632, China
  • 2Clinical Laboratory Center, The Affiliated Guangdong Second Provincial General Hospital of Jinan University,Guangzhou 510317, China
  • show less
    References(32)

    [1] [1] Z. Ni, “The reasons and countermeasures for water-injected meat,” Journal of Agricultural Sciences, 2016, 37(4): 89–92.

    [2] [2] W. Zheng, J. Wang, and S. Zhao, “Advances in research of detection techniques for carrageen illegally used in the pre-slaughtering pigs,” China Animal Health Inspection, 2015, 32(9): 69–71.

    [3] [3] L. Cheng, Y. Wang, and S. Lin, “Main hazards and inspection methods of PSE meat, water injected meat and glue injected meat,” Zhejiang Journal Animal Science and Veterinary Medicine, 2015,40(3): 13–15.

    [4] [4] Z. Tang, Y. Zhou, Y. Zhou, and P. Zheng, “Brief analysis on harm and sensory identification of five kinds of questionable meat,” Meat Industry, 2015,12: 47–48.

    [5] [5] S. Zhu and C. Li, “Identification and inspection methods of water injected meat,” Technical Advisor for Animal Husbandry, 2011, 3: 174.

    [6] [6] H. Li, “Strengthen the identification and control measures of water injected meat,” Chinese Journal of Veterinary Medicine, 2013, 49(7): 78–79.

    [7] [7] L. Cheng and Y. Jiao, “Inspection methods of the PSE meat, water-injected meat and gel-injected meat,” China Animal Health Inspection, 2015, 32(4):28–31.

    [8] [8] Y. Huang, G. Chen, J. Xia, and H. Yu, “Status and trends of nondestructive detection technology for water-injected meat,” Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(1):207–215.

    [9] [9] Y. Leng, Y. Sun, X. Wang, J. Hou, X. Bai, and M. Wang, “A method to detect water-injected pork based on bioelectrical impedance technique,”Journal of Food Measurement and Characterization,2019, 13(2): 1341–1348.

    [10] [10] S. Gai, Z. Zhang, Y. Zou, and D. Liu, “Rapid and non-destructive detection of water-injected pork using low-field nuclear magnetic resonance (LF-NMR) and magnetic resonance imaging (MRI),”International Journal of Food Engineering, 2019,15(8): 20180313.

    [11] [11] H. Yu, J. Xu, H. Liu, C. Liu, D. Zhang, and K. Chen,“Identification of water injection meat based on hyperspectral technique and spectrum characteristics,” Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(11): 366–372.

    [12] [12] J. Liu, Y. Cao, Q. Wang, W. Pan, F. Ma, C. Liu, et al.,“Rapid and non-destructive identification of water-injected beef samples using multispectral imaging analysis,” Food Chemistry, 2016, 190: 938–943.

    [13] [13] D. Hao, Y. Zhou, Y. Wang, S. Zhang, Y. Yang, L. Lin,et al., “Recognition of water-injected meat based on vsible/near-infrared spectrum and sparse representation,” Spectroscopy & Spectral Analysis,2015, 35(1): 93–98.

    [14] [14] M. Wang, L. Xu, L. Chen, S. Hou, G. Wu, and Z.Deng, “A modified soil water content measurement technique using actively heated fiber optic sensor,” Journal of Rock Mechanics and Geotechnical Engineering, 2020, 12(3): 608–619.

    [15] [15] M. Sun, B. Shi, C. Zhang, X. Zheng, J. Guo, Y.Wang, et al., “Quasi-distributed fiber-optic in-situ monitoring technology for large-scale measurement of soil water content and its application,”Engineering Geology, 2021, 294: 106373.

    [16] [16] K. Zhao, H. Gao, F. Chen, R. Wang, and X. Qiao,“Sandy soil moisture content measurement method based on heated fiber Bragg grating,” Optical Fiber Technology, 2021, 67: 102690.

    [17] [17] J. Wang, Z. Li, and J. Wang, “All-optical fiber miniature soil moisture content sensor,” Infrared and Laser Engineering, 2022, 51(3): 20210299-1–20210299-6.

    [18] [18] M. Mehravar, H. Yang, D. J. Webb, W. Zhang, S. F.Sestelani, and D. N. Chapman, “Soil water content measurement using polymer optical fibre Bragg gratings,” Proceedings of the Institution of Civil Engineers ? Smart Infrastructure and Construction,2021, 174(1): 11–21.

    [19] [19] J. Guo, B. Shi, M. Sun, W. Cheng, C. Zhang, G. Wei,et al., “Application of PI-FBG sensor for humidity measurement in unsaturated soils,” Measurement,2022, 188: 110415.

    [20] [20] M. Sun, B. Shi, C. Zhang, J. Liu, J. Guo, X. Zheng,et al., “Quantifying the spatio-temporal variability of total water content in seasonally frozen soil using actively heated fiber Bragg grating sensing,” Journal of Hydrology, 2022, 606: 127386.

    [21] [21] J. Li, H. Zhu, B. Wu, L. Hu, X. Liu, and B. Shi,“Study on actively heated fiber Bragg grating sensing technology for expansive soil moisture considering the influence of cracks,” Measurement,2023, 218: 113087.

    [22] [22] Y. Ran, Z. Xu, M. Chen, W. Wang, Y. Wu, J. Cai,et al., “Fiber-optic theranostics (FOT): interstitial fiber-optic needles for cancer sensing and therapy,”Advanced Science, 2022, 9(15): 2200456.

    [23] [23] J. Albert, B. Malo, F. Bilodeau, D. C. Johnson, and M. Kawachi, “Photosensitivity in Ge-doped silica optical waveguides and fibers with 193-nm light from an ArF excimer laser,” Optics Letters, 1994,19(6): 387–389.

    [24] [24] J. Albert, B. Malo, K. O. Hill, F. Bilodeau, D. C.Johnson, and S. T. Riault, “Comparison of one-photon and two-photon effects in the photosensitivity of germanium-doped silica optical fibers exposed to intense ArF excimer laser pulses,” Applied Physics Letters, 1995, 67(24): 3529–3531.

    [25] [25] P. Xiao, Z. Xu, D. Hu, L. Liang, L. Sun, J. Li,et al., “Efficiently writing Bragg grating in high-birefringence elliptical microfiber for label-free immunosensing with temperature compensation,”Advanced Fiber Materials, 2021, 3(5): 321–330.

    [26] [26] W. Yong, C. Q. Xu, and P. Hong, “Analysis of Raman and thermal effects in kilowatt fiber lasers,”Optics Communications, 2004, 242(4–6): 487–502.

    [27] [27] L. Qi, L. Jin, Y. Liang, L. Cheng, and B. Guan,“Efficiency enhancement of optical tuning for Bragg gratings in rare-earth doped fibers,” IEEE Photonics Technology Letters, 2014, 26(12): 1188–1191.

    [28] [28] M. E. Innocenzi, H. T. Yura, C. L. Fincher, and R. A.Fields, “Thermal modeling of continuous-wave end-pumped solid-state lasers,” Applied Physics Letters, 1990, 56(19): 1831–1833.

    [29] [29] L. Yan and C. H. Lee, “Thermal effects in end-pumped Nd:phosphate glasses” Journal of Applied Physics, 1994, 75(3): 1286–1292.

    [30] [30] Y. Rong and P. Hu “Thermophysical data of meat,”Meat Industry, 1996, 2: 42–43.

    [31] [31] Y. Deng, “Study on the moisture limit of pork in our country,” Meat Industry, 2016, 11: 24–27.

    [32] [32] D. Sun, Y. Ran, and G. Wang, “Label-free detection of cancer biomarkers using an in-line taper fiber-optic interferometer and a fiber Bragg grating,” Sensors, 2017, 17(11): 2559.

    Tools

    Get Citation

    Copy Citation Text

    Xiaodong XIE, Enlai SONG, Ziyu YUAN, Yi YIN, Yongkang ZHANG, Qiaochu YANG, Zhiyuan XU, Yang RAN. Fiber-Optic Bragg Grating Sensor for Photothermally Examinating Moisture of Meat[J]. Photonic Sensors, 2024, 14(3): 240310

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Regular

    Received: Aug. 10, 2023

    Accepted: Jan. 5, 2024

    Published Online: Aug. 16, 2024

    The Author Email: XU Zhiyuan (2016jnuxzy@stu2018.jnu.edu.cn)

    DOI:10.1007/s13320-024-0720-6

    Topics