Optics and Precision Engineering, Volume. 26, Issue 8, 1994(2018)
Three-dimensional surface roughness characterization and application
[2] [2] WHITEHOUSE D J. Handbook of surface and nanometrology [M]. Boca Raton: CRC Press, 2010.
[3] [3] LEACH R K. Fundamental principles of engineering nanometrology [M]. Amsterdam: Elsevier/Willian Andrew, 2014.
[4] [4] LI B K, LIU Y W. Study of developing tendency of surface roughness [J]. Tool Engineering, 2004, 38(1): 63-67. (in Chinese)
[5] [5] CHEN J T. A Survey of the research on surface roughness measuring development and method [J]. China Science and Technology Information, 2007(17): 305-306. (in Chinese)
[6] [6] YANG Y CH, WANG Y B. The comparison between surface roughness and the level of finish [J]. Mechanical Engineer, 1987(4): 44-45. (in Chinese)
[7] [7] WANG Y T, HAN X CH. The relationship between characterization parameters of surface roughness and its functional properties [J]. Journal of Yanshan University, 1983(4): 50-58. (in Chinese)
[8] [8] LI C G, DONG S. The research status and development of surface roughness [J]. Aviation Precision Manufacturing Technology,1999, 35(5): 1-4. (in Chinese)
[9] [9] LIU CH SH, ZHANG L H. Selection and effect of parts surface roughness [J]. Modern Manufacturing Engineering, 2004(2): 114-115.(in Chinese)
[10] [10] GRIEVE D J, KALISZER H and ROWE G W. A “Normal Wear” Process Examined by Measurements of Surface Topography [J]. CIRP Annals, 1970, 16 (4): 585-592.
[11] [11] LI CH G, DONG S. The Trends of characterizing 3D surface microtopography [J]. China Mechanical Engineering, 2000, 11(5): 488-492. (in Chinese)
[12] [12] ISO/FDIS 25178-2: 2010. Geometrical product specifications (GPS)-Surface texture: Areal-Part 2: Terms, definitions and surface texture parameters [S].
[13] [13] STOUT K J. Development of methods for the characterisation of roughness in three dimensions [M]. 1st Edition, Amsterdam: Elsevier, 1998.
[14] [14] ZHANG L N, ZHAO F X, LI X P, et al.. Analysis of modern product geometry specification (GPS) system and application [J]. Journal of Mechanical Strength, 2004, 26(4): 400-404. (in Chinese)
[15] [15] LI X P. Recent work of ISO/TC213 "product size and geometry specification and inspection" [J]. Standardization and quality of machinery industry, 1996(12): 33-34.(in Chinese)
[16] [16] WHITEHOUSE D J. The parameter rash-is there a cure [J]. Wear, 1982, 83(1): 75-78.
[17] [17] LEACH R K. Characterisation of Areal Surface Texture [M]. Berlin Heidelberg: Springer, 2013.
[18] [18] CHEN G Q, ZHANG W Q, PENG W J. Research on the 3-D detection and areal characterization of micro-topography of lapping surface [J]. Machine Design and Research, 2009, 25(2): 19-22.(in Chinese)
[19] [19] BLUNT L, JIANG X Q. Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards SurfStand [M]. Amsterdam: Elsevier, 2003.
[20] [20] ISO. How to write standards [R]. Geneva: International Organization for Standardization, 2013.
[21] [21] GB/T 33523.6-2017. Geometrical Product Specifications-surface texture: areal-part 6: Classification of surface structure measurement methods [S].(in Chinese)
[22] [22] LEACH R K, DE GROOT P. The standards rash - is there a cure [J]. International Journal of Metrology & Quality Engineering, 2015, 6(1): 101.
[23] [23] JIANG X Q, SCOTT P J, WHITEHOUSE D J, et al.. Paradigm Shifts in Surface Metrology. Part II. The Current Shift [J]. Proceedings Mathematical Physical & Engineering Sciences, 2007, 463(2085): 2071-2099.
[24] [24] WHITEHOUSE D J. Surface and their measurement [M]. London: Hermes Penton Ltd, 2002.
[25] [25] WANG Y L, TU H X. Characterization techniques and methods of micro-surface [J]. Journal of Anhui University of Technology (Natural Science), 2005, 22 (4): 369-371.(in Chinese)
[26] [26] LI CH G, DONG SH. Methods and analysis of 3D surface roughness measurement [J]. Aviation Precision Manufacturing Technology, 1999, 32(02): 36-40. (in Chinese)
[27] [27] LEACH R K, HART A. A comparison of stylus and optical methods for measuring 2D surface texture [R]. National Physical Laboratory (NPL) REPORT CBTLM 15, 2002.
[28] [28] LEACH R K. Optical measurement of surface topography [M]. Berlin: Springer-Verlag, 2011.
[29] [29] VORBURGER T V, RHEE H G, RENEGAR T B, et al.. Comparison of optical and stylus methods for measurement of surface texture [J]. International Journal of Advanced Manufacturing Technology, 2007, 33(1): 110-118.
[30] [30] CHEN J CH, FENG SH X, GUO B S, et al.. Methods employed for measuring surface microtopography [J]. Acta Metrologica Sinica, 2016, 37(6A): 204-211.(in Chinese)
[31] [31] WHITEHOUSE D J. Comparison between stylus and optical methods for measuring surfaces [J]. CIRP Annals, 1988, 37 (2): 649-653.
[32] [32] YANG J H. A summary of the transformation of surface roughness characterization from two-dimensional to three-dimensional [J]. Machinery Industry Standardization & Quality, 2015, (505): 20-23.(in Chinese)
[33] [33] LI H F, JIANG X Q, LI ZH. Summary of development of 3D surface function evaluation technology [J]. Tool Engineering, 2002, 36(2): 8-11.
[34] [34] MATHIA T G, PAWLUS P, WIECZOROWSKI M. Recent trends in surface metrology [J]. Wear, 2011, 271(3): 494-508.
[35] [35] STOUT K J, SULLIVAN P J,MCKEOWN P A. The use of 3D topographic analysis to determine the micro-geometric transfer characteristics of textured sheet surfaces through rolling [J]. CIRP Annals, 1992, 41 (1): 621-624.
[36] [36] WENNERBERG A, OHLSSONT R, ROSKNT B G, et al.. Characterizing three-dimensional topography of engineering and biomaterial surfaces by confocal laser scanning and stylus techniques [J]. Medical Engineering Physics, 1996, 18(7): 548-556.
[37] [37] DONG W P, STOUT K J. An integrated approach to the characterisation of surface wear: Qualitative characterisation [J]. Wear, 1995, 181: 700-716.
[38] [38] BLUNT L and EBDON S. The application of three-dimensional surface measurement techniques to characterizing grinding wheel topography [J]. International Journal of Machine Tools and Manufacture, 1996, 36 (11): 1207-1226.
[39] [39] XIE H C, CHEN D R, KONG X M. An analysis of the three-dimensional surface topography of textured cold-rolled steel sheets [J]. Tribology International, 1999, 32(2): 83-87.
[40] [40] JIANG X Q, BLUNT L, STOUT K J. Three-dimensional surface characterization for orthopaedic joint prostheses [J]. Journal of Engineering in Medicine,1999, 213(1): 49-68.
[41] [41] RAMASAWMY H, BLUNT L. 3D surface topography assessment of the effect of different electrolytes during electrochemical polishing of EDM surfaces [J]. International Journal of Machine Tools and Manufacture, 2002, 42: 567-574.
[42] [42] RAMASAWMY H, Blunt L and RAJURKAR K P. Investigation of the relationship between the white layer thickness and 3D surface texture parameters in the die sinking EDM process [J]. Precision Engineering, 2005, 29(4): 479-490.
[43] [43] BUTLER D L, BLUNT L, SEE B K, et al.. The characterisation of grinding wheels using 3D surface measurement techniques [J]. Journal of Materials Processing Technology, 2002, 127(2): 234-237.
[44] [44] AL-NAWAS B, GTZ H. Three-dimensional topographic and metrologic evaluation of dental implants by Confocal Laser Scanning Microscopy [J]. Clinical Implant Dentistry and Related Research,2003, 5(3): 176-183.
[45] [45] SUH A Y, POLYCARPOU A A, CONRY T F. Detailed surface roughness characterization of engineering surfaces undergoing tribological testing leading to scuffing [J]. Wear, 2003, 255(1): 556-568.
[46] [46] WANG J M, YANG ZH X. Study of roughness measurement on cutting surface of composites [J]. Aerospace Materials & Technology, 2004, 34(4): 59-62. (in Chinese)
[47] [47] BNARD Q, FOIS M, GRISEL M. Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surface [J]. International Journal of Adhesion and Adhesives, 2005, 25(5): 404-409.
[48] [48] KUNDRAK J, OSANNA P H, AFJEHI-SADA A, et al.. Surface quality of hard turned boreholes [C]. Metrology for a Sustainable Development, XVIII IMEKO WORLD CONGRESS, Rio de Janeiro, Brazil: September 2006.
[49] [49] KRZYZAK Z, PAWLUS P. 'Zero-wear' of piston skirt surface topography [J]. Wear, 2006, 260(4): 554-561.
[50] [50] SENIN N, ZILIOTTI M, GROPPETTI R. Three-dimensional surface topography segmentation through clustering [J]. Wear, 2007,262(3): 395-410.
[51] [51] AI CH ZH, YANG D J, ZHAO F L, et al.. Study on measurement & evaluation of cutting surface roughness of C/C Composite and the influential factors [J]. Aviation Precision Manufacturing Technology, 2005, 41(6): 31-34.(in Chinese)
[52] [52] ZHAO F L, AI CH ZH, YANG D J, et al.. Study on the evaluation method and evaluation parameters of cutting surface roughness of carbon/carbon composite [J]. Acta Metrologica Sinica, 2006, 27(3): 206-211.(in Chinese)
[53] [53] BNARD Q, FOIS M and GRISEL M. Surface treatment of carbon/epoxy and glass/ epoxy composites with an excimer laser beam [J]. International Journal of Adhesion and Adhesives, 2006, 26(7): 543-549.
[54] [54] BROWN L T. The use of 3D surface analysis techniques to investigate the wear of matt surface finish femoral stems in total hip replacement [D]. University of Huddersfield, 2006.
[55] [55] SUL Y T, KANG B S, JOHANSSON C, et al.. The roles of surface chemistry and topography in the strength and rate of oseointegration of titanium implants in bone [J]. Journal of Biomedical Materials Research, 2009, Part A, 89(4): 942-950.
[56] [56] LE GUHENNEC L, SOUEIDAN A, LAYROLLE P, et al.. Surface treatments of titanium dental implants for rapid osseointegration [J]. Dental materials. 2007, 23(7): 844-854.
[57] [57] YUAN CH Q, YAN X P, PENG ZH X. Three-dimensional surface characterisation of wear debris [J]. Tribology, 2007, 27(3): 294-296. (in Chinese)
[58] [58] VILA R F, GODOY C, ABRO A M, et al.. Topographic analysis of the crater wear on TiN, Ti (C, N) and (Ti, Al) N coated carbide tools [J]. Wear, 2008, 265(1): 49-56.
[59] [59] MICHALSKI J. Surface topography of the cylindrical gear tooth flanks after machining [J]. International Journal of Advanced Manufacturing Technology, 2009, 43(5): 513-516.
[60] [60] WAIKAR R A, GUO Y B. A comprehensive characterisation of 3D surface topography induced by hard turning versus grinding [J]. Journal of Materials Processing Technology, 2008, 197(1): 189-199.
[61] [61] NGUYEN A T, BUTLER D. Correlation of grinding wheel topography and grinding performance: A study from a viewpoint of three-dimensional surface characterisation [J]. Journal of Materials Processing Technology, 2008, 208 (1): 14-23.
[62] [62] ARIS N F M, CHENG K. Characterization of the surface functionality on precision machined engineering surfaces [J]. International Journal of Advanced Manufacturing Technology, 2008, 38(3): 402-409.
[63] [63] LI B K. Study on the law of the skew and steepness of three-dimensional surface [J]. Measurement Technique, 2008(10): 3-6.(in Chinese)
[64] [64] SCARDINO A J, HUDLESTON D, PENG Z, et al.. Biomimetic characterisation of key surface parameters for the development of fouling resistant materials [J]. Biofouling, 2009, 25 (1): 83-93.
[65] [65] CZIFRA , HORVTH S. Complex microtopography analysis in sliding friction of steel-ferodo material pair [J]. Meccanica, 2011, 46(3): 609-616.
[66] [66] WANG J, JIANG X J, GURDAK E, et al.. Numerical characterisation of biomedical titanium surface texture using novel feature parameters [J]. Wear, 2011, 271(7): 1059-1065.
[67] [67] TIAN Y, WANG J, PENG Z, et al.. Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters [J]. Wear, 2011, 271(9): 2370-2378.
[68] [68] MO H L, ZHU Y W, TANG X X, et al.. Parameter optimization when lapping K9 glass with fixed abrasive pad [J]. Diamond & Abrasives Engineering, 2012, 32(3): 7-11. (in Chinese)
[69] [69] ZHANG Q, LIU W, TANG X J. Evaluation of Cutting Surface Roughness of PBX Explosive and Its Influentce Factors [J]. Chinese Journal of Energetic Materials, 20(6): 775- 778. (in Chinese)
[70] [70] WANG X Q, YU ZH L, CUI F K. Correlation analysis of 3D characterization parameters and wear resistance based on grey correlation [J]. Journal of Henan Polytechnic University (Natural Science), 2014, 33(6): 761-765. (in Chinese)
[71] [71] BULAHA N. Analysis of service properties of cylindrically ground surfaces, using standard ISO 25178-2: 2012 surface texture parameters [C]. Proceedings of the 10th International Scientific and Practical Conference, Rezekne, Latvia, 2015,1: 16-21.
[72] [72] LIU B, QI X H, ZHANG M. Roughness evaluation of 3D surface profile [J]. Opt. Precision Eng., 2016,24(10s): 135-140.(in Chinese)
[73] [73] XU SH H, HE Y L, QIN G CH, et al.. Relationship between steel corrosion ratio and 3D surface roughness parameters [J]. Journal of Materials Science and Engineering, 2016, 34(2): 292-295.(in Chinese)
[75] [75] ZHENG L G, YAO P, ZHANG ZH Y, et al.. High-pressure abrasive water jet dressing of metal bonded diamond grinding wheel [J]. Opt. Precision Eng., 2016, 24 (10s): 477-483.(in Chinese)
[76] [76] XIE J F, HE SH X, LI D L, et al.. Effect of surface states on fatigue plastic deformation localization [J]. Surface Technology, 2017, 46(2): 224-228.(in Chinese)
[77] [77] GONG M, RAO SH ZH, LI L. Effects of machining parameters on surface roughness of joints in manufacturing structural finger-joined lumber [J]. Journal of Forestry Engineering, 2017, 2(4): 10-18.
[78] [78] LEACH R K, BROWN L, JIANG J, et al.. Measurement Good Practice Guide No. 108-Guide to the measurement of smooth surface topography using coherence scanning interferometry [M]. National Physical Laboratory (NPL), 2008.
[79] [79] JIANG X Q, BLUNT L. Advance in the Three-Dimensional Surface Metrology [J]. Chinese Journal of Engineering Design, 2000,7(4): 98-100. (in Chinese)
[80] [80] LI B K, LI N L, LIU Y W, et al.. Functional parameters of surface roughness and experimental study of its 3-D index [J]. Machinery Design&Manufacture, 2011, (9): 179-181. (in Chinese)
[81] [81] ZHANG H Y, JIANG X Q, BLUNT L, et al.. The application of 3D surface metrology in characterization of femoral stem wear [J]. Journal of Basic Science and Engineering, 2012, 20(1): 139-148.(in Chinese)
[82] [82] HE B F, PETZING J, WEBB P, et al.. Improving copper plating adhesion on glass using laser machining techniques and areal surface texture parameters [J]. Optics & Lasers in Engineering, 2015, 75: 39-47.
[83] [83] WHITEHOUSE D J. Function maps and the role of surfaces [J]. International Journal of Machine Tools & Manufacture, 2001, 41(13): 1847-1861.
[84] [84] LI L W, DONG S, CHENG K. Generation, Characterization and Function of Super-smooth Surfaces [J]. Tool Engineering, 2002, 36(8): 15-18. (in Chinese)
[85] [85] QI Q, LI T, SCOTT P J, et al.. A Correlational Study of Areal Surface Texture Parameters on Some Typical Machined Surfaces [J]. Procedia CIRP, 2015, 27: 149-154.
[86] [86] TODHUNTER L D, LEACH R K, LAWES S D A, et al.. Industrial survey of ISO surface texture parameters [J]. CIRP Journal of Manufacturing Science & Technology, 2017,19: 84-92.
Get Citation
Copy Citation Text
HE Bao-feng, WEI Cui-e, LIU Bing-xian, DING Si-yuan, SHI Zhao-yao. Three-dimensional surface roughness characterization and application[J]. Optics and Precision Engineering, 2018, 26(8): 1994
Category:
Received: Mar. 21, 2018
Accepted: --
Published Online: Oct. 2, 2018
The Author Email: Bao-feng HE (baofenghe@bjut.edu.cn)