[1] Liu C W, Duan F J, Li J et al. A scanning direction calibration method of line-structured light three-dimensional sensors[J]. Chinese Journal of Lasers, 50, 0504001(2023).

[2] Zhang Q, Zhang K, Zhu M Q et al. Fast extraction of structure light strip center under motion blur[J]. Laser & Optoelectronics Progress, 60, 0112002(2023).

[3] Li Z Y, Lin J R, Sun Y B et al. A method for measuring circular pose based on line structured light sensor[J]. Acta Optica Sinica, 40, 1512004(2020).

[4] Liu X, Wang Z L, Yao P et al. Measurement and error compensation of 3D morphology with precision rotation line structured light[J]. Chinese Journal of Lasers, 49, 2104004(2022).

[5] Song Z, Chung R, Zhang X T. An accurate and robust strip-edge-based structured light means for shiny surface micromeasurement in 3-D[J]. IEEE Transactions on Industrial Electronics, 60, 1023-1032(2013).

[6] Wang Z Z. Robust three-dimensional face reconstruction by one-shot structured light line pattern[J]. Optics and Lasers in Engineering, 124, 105798(2020).

[7] Vargas R, Marrugo A G, Zhang S et al. Hybrid calibration procedure for fringe projection profilometry based on stereo vision and polynomial fitting[J]. Applied Optics, 59, D163-D169(2020).

[8] Cai Z W, Liu X L, Li A M et al. Phase-3D mapping method developed from back-projection stereovision model for fringe projection profilometry[J]. Optics Express, 25, 1262-1277(2017).

[9] Marrugo A G, Vargas R, Romero L A et al. Method for large-scale structured-light system calibration[J]. Optics Express, 29, 17316-17329(2021).

[10] Ping Y S, Liu Y K. A calibration method for line-structured light system by using sinusoidal fringes and homography matrix[J]. Optik, 261, 169192(2022).

[11] Suresh V, Holton J, Li B W. Structured light system calibration with unidirectional fringe patterns[J]. Optics and Lasers in Engineering, 106, 86-93(2018).

[12] Feng S J, Zuo C, Zhang L et al. Calibration of fringe projection profilometry: a comparative review[J]. Optics and Lasers in Engineering, 143, 106622(2021).

[13] Miao Y P, Yang Y, Hou Q Y et al. High-efficiency 3D reconstruction with a uniaxial MEMS-based fringe projection profilometry[J]. Optics Express, 29, 34243-34257(2021).

[14] Zhu Z M, Wang X Y, Zhou F Q et al. Calibration method for a line-structured light vision sensor based on a single cylindrical target[J]. Applied Optics, 59, 1376-1382(2020).

[15] Li W G, Hou D M, Luo Z X et al. 3D measurement system based on divergent multi-line structured light projection, its accuracy analysis[J]. Optik, 231, 166396(2021).

[16] Pan H H, Wang Y W, Zhong G W et al. Method of using non-specific target to complete structured light plane calibration[J]. Optics Communications, 492, 126980(2021).

[17] Zhang R F, Shu Z Y, Nan G L. Calibration method for line-structured light[J]. Laser & Optoelectronics Progress, 56, 221101(2019).

[18] Yang D, Qiao D Y, Xia C F. Curved light surface model for calibration of a structured light 3D modeling system based on striped patterns[J]. Optics Express, 28, 33240-33253(2020).

[19] Yang S C, Yang T, Wu G X et al. Flexible and fast calibration method for uni-directional multi-line structured light system[J]. Optics and Lasers in Engineering, 164, 107525(2023).

[20] Lu X T, Wu Q Y, Huang H T. Calibration based on ray-tracing for multi-line structured light projection system[J]. Optics Express, 27, 35884-35894(2019).

[21] von Gioi R G, Randall G. A sub-pixel edge detector: an implementation of the canny/devernay algorithm[J]. Image Processing on Line, 7, 347-372(2017).

[22] Huang Z Z, Huang X M, Zheng L Y et al. Camera calibration method for concentric circle eccentricity error compensation iteration[J]. Acta Optica Sinica, 42, 1912003(2022).

[23] Sun C F, Peng T, Lu Y G et al. Fast extraction center stripe of multi-line-structured light for three-dimensional measurement of casting slab[J]. Optics and Precision Engineering, 31, 380-392(2023).

[24] Zhang Z Y. A flexible new technique for camera calibration[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 22, 1330-1334(2000).