[2] [2] Sun Peng. Research on key technologies of largescale dynamic photogrammetry[D]. Beijing: Beijing University of Posts Telecommunications, 2019. （in Chinese）

[3] [3] Baumer S M B, Timmers W A G, Krichever M, et al. Temperaturecompensated plastic lens f visible light [C]Optical Systems Design & Production. International Society f Optics Photonics, SPIE, 1999, 3737: 354362.

[4] [4] Ma Qinwei. Research on the mechanism crection of errs in optical mechanics methods caused by temperature[D]. Beijing: Beijing Institute of Technology, 2014. （in Chinese）

[5] [5] Tao Li. Research on visual measurement method under thermal vacuum environment[D]. Tianjin: Tianjin University, 2012. （in Chinese）

[6] Wang Linghua, Wu Qingwen, Guo Liang, et al. Thermal design and thermal analysis of high-resolution visible light aerial camera[J]. Infrared and Laser Engineering, 41, 1236-1243(2012).

[7] Wang Yang, Meng Qingliang, Zhao Zhenming, et al. All-optical cold chain thermal design of transmissive cryogenic optical infrared camera[J]. Infrared and Laser Engineering, 50, 20200345(2021).

[8] [8] Robson S, Clarke T A, Chen J. Suitability of the Pulnix TM6CN CCD camera f photogrammetric measurement [C]Optical Tools f Manufacturing Advanced Automation, SPIE, 1993, 2067: 6677.

[9] [9] Hel H. Analyzing the influence of camera temperature on the image acquisition process [C]Proceedings of SPIEThe International Society f Optical Engineering, 2008, 6805: 6805X.

[10] Yu Q, Chao Z, Jiang G, et al. The effects of temperature variation on videometric measurement and a compensation method[J]. Image and Vision Computing, 32, 1021-1029(2014).

[11] [11] Smith M J, Cope E. The effects of temperature variation on singlelensreflex digital camera calibration parameters [C]International Archives of Photogrammetry, Remote Sensing Spatial Infmation Sciences, 2010, XXXVIII: 554559.

[12] Podbreznik P, Potočnik B. Assessing the influence of temperature variations on the geometrical properties of a low-cost calibrated camera system by using computer vision procedures[J]. Machine Vision and Applications, 23, 953-966(2012).

[13] Daakir M, Zhou Y, Pierrot Deseilligny M, et al. Improvement of photogrammetric accuracy by modeling and correcting the thermal effect on camera calibration[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 148, 142-155(2019).

[14] Yu L, Lubineau G. Modeling of systematic errors in stereo-digital image correlation due to camera self-heating[J]. Scientific Reports, 9, 18007(2019).

[15] Pan B, Yu L, Wu D. High-accuracy 2D digital image correlation measurements with bilateral telecentric lenses: Error analysis and experimental verification[J]. Experimental Mechanics, 53, 1719-1733(2013).

[16] Ma S, Zhou S, Ma Q. Image distortion of working digital camera induced by environmental temperature and camera self-heating[J]. Optics and Lasers in Engineering, 115, 67-73(2019).

[17] Zhou S, Zhu H, Ma Q, et al. Heat transfer and temperature characteristics of a working digital camera[J]. Sensors, 20, 2561(2020).

[18] Pan B, Shi W, Lubineau G. Effect of camera temperature variations on stereo-digital image correlation measurements[J]. Applied Optics, 54, 10089(2015).

[19] [19] Fan Yue. Research on photomechanical thermal analysis thermal control technology of aerial camera[D]. Chengdu: Graduate University of Chinese Academy of Sciences (Institute of Optoelectronic Technology), 2013. （in Chinese）

[20] Li Xueli, Zhang Lei, Fu Zhikai. Analysis of finite element simulation method for thermal stress of infrared focal plane detector[J]. Laser & Infrared, 50, 429-434(2020).

[21] Song Xincheng, Zhang Yu, Shi Yanfei, et al. Design of temperature control system for infrared thermal imager under non-uniform temperature field[J]. Infrared and Laser Engineering, 48, 0604002(2019).

[22] Guo Liang, Wu Qingwen, Ding Yalin, et al. Design and verification of phase change temperature control for focal plane components of aerial camera[J]. Infrared and Laser Engineering, 42, 2060-2067(2013).