[1] Yang Y Q, Chen J, Song C H et al. Current status and progress on technology of selective laser melting of metal parts[J]. Laser & Optoelectronics Progress, 55, 011401(2018).

[2] Wang Y, Zhou X F. Research front and trend of specific laser additive manufacturing techniques[J]. Laser Technology, 45, 475-484(2021).

[3] Yap C Y, Chua C K, Dong Z L et al. Review of selective laser melting: materials and applications[J]. Applied Physics Reviews, 2, 041101(2015).

[4] Ngo T D, Kashani A, Imbalzano G et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges[J]. Composites Part B: Engineering, 143, 172-196(2018).

[5] Shi W T, Wang P, Liu Y D et al. Experimental study on surface quality and process of selective laser melting forming 316L[J]. Surface Technology, 48, 257-267(2019).

[6] Li H Y, Li Z H, Yang R et al. Research progress in forming quality control of selective laser melting metal surface[J]. Surface Technology, 49, 118-124, 156(2020).

[7] Li J, Yang L J, Zheng H et al. Influence of laser selection melting times on the surface properties of 316L stainless steel[J]. Surface Technology, 50, 93-100(2021).

[8] Huang W D, Zhang W J, Lian G F et al. Effect of SLM forming process parameters on surface roughness of 316L stainless steel parts[J]. Applied Laser, 40, 35-41(2020).

[9] Hu Y, Yang X K, Kang W J et al. Effects of combination of powders with different particle sizes on surface roughness and internal defects of IN738 alloy formed by selective laser melting[J]. Laser & Optoelectronics Progress, 58, 0114003(2021).

[10] Wei J F, Wu M P, Han J T. Effect mechanism of scanning strategy on surface quality of Inconel 718 by SLM[J]. Applied Laser, 40, 621-625(2020).

[11] Chen L, Richter B, Zhang X Z et al. Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing[J]. Additive Manufacturing, 32, 101013(2020).

[12] Jing Y L, Li J, Shi W T et al. Prediction of residual stress in selective laser melting based on neural network[J]. High Power Laser and Particle Beams, 33, 109001(2021).

[13] Yang T Y, Zhang P L, Yin Y et al. Microstructure based on selective laser melting and mechanical properties prediction through artificial neural net[J]. Transactions of the China Welding Institution, 40, 100-106, 165(2019).

[14] Wang W Q, Li Y Q, Li X et al. Microstructures and properties of Ni-Cr-B-Si alloy powders prepared by selective laser melting[J]. Materials Reports, 34, 2077-2082(2020).

[15] Yadroitsev I, Bertrand P, Smurov I. Parametric analysis of the selective laser melting process[J]. Applied Surface Science, 253, 8064-8069(2007).

[16] Yang X, Ma W J, Ren Y J et al. Subgrain microstructures and tensile properties of 316L stainless steel manufactured by selective laser melting[J]. Journal of Iron and Steel Research International, 28, 1159-1167(2021).

[17] Wang W Q, Wang S Y, Chen F et al. Microstructure and mechanical properties of TiN/Inconel 718 composites fabricated by selective laser melting[J]. Acta Metallurgica Sinica, 57, 1017-1026(2021).

[18] Yin Y, Liu P Y, Lu C et al. Microstructure and tensile properties of selective laser melting forming 316L stainless steel[J]. Transactions of the China Welding Institution, 39, 77-81, 132(2018).

[19] Yu C F, Zhao C C, Zhang Z F et al. Tensile properties of selective laser melted 316L stainless steel[J]. Acta Metallurgica Sinica, 56, 683-692(2020).

[20] Kong D C, Dong C F, Wei S L et al. About metastable cellular structure in additively manufactured austenitic stainless steels[J]. Additive Manufacturing, 38, 101804(2021).

[21] Gu D D, Shen Y F. Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods[J]. Materials & Design, 30, 2903-2910(2009).

[22] Xiao J L, Yue D W, Zhao Z D et al. A visible light localization algorithm based on BP neural network optimized by genetic algorithm[J]. Journal of Optoelectronics·Laser, 30, 810-816(2019).

[23] Song H S, Chen Z, Xu D C et al. Prediction of Cr, Mn and Ni in medium and low alloy steels by GA-BP neural network combined with EDXRF technology[J/OL]. Laser & Optoelectronics Progress, 1-14. http://kns.cnki.net/kcms/detail/31.1690.TN.20210713.0915.019.html

[24] Gao H, Xue L Y. Back propagation neural network based on improved genetic algorithm fitting LED spectral model[J]. Laser & Optoelectronics Progress, 54, 072302(2017).