Measurement comparison for class-1 gear involute artifact in China

Siying LING; Ming LING; Zhaoyao SHI; Lin BO; Liding WANG

doi:10.37188/OPE.20223000.0392

Optics and Precision Engineering, Volume. 30, Issue 22, 2869(2022)

Measurement comparison for class-1 gear involute artifact in China

Siying LING^1,2、*, Ming LING¹, Zhaoyao SHI³, Lin BO⁴, and Liding WANG^1,2

¹Key Laboratory for Micro/ Nano Technology and System of Liaoning Province，Dalian University of Technology， Dalian6023， China

²Key Laboratory for Precision & Non-traditional Machining of Ministry of Education，Dalian University of Technology， Dalian11603， China

³Beijing Engineering Research Centre of Precision Measurement Technology and Instruments， Beijing Institute of Technology， Beijing100124， China

⁴State Key Laboratory of Mechanical Transmission， Chongqing University， Chongqing000， China

show less

Abstract Get PDF(in Chinese)

References(17)

[1] [1] 1国家质量监督检验检疫总局，中国国家标准化管理委员会. 齿轮渐开线样板： GB/T 6467-2010［S］. 北京：中国标准出版社， 2011. doi: 10.3969/j.issn.1002-7203.2014.04.003General Administration of Quality Supervision， Inspection and Quarantine of the People's Republic of China， Standardization Administration of the People's Republic of China. The Involute Artifact of Gear： 6467-2010GB/T ［S］. Beijing： Standards Press of China， 2011. （in Chinese）. doi: 10.3969/j.issn.1002-7203.2014.04.003

[2] [2] 2汤洁，张溶洲，石照耀. 基于Javaweb的齿轮双啮测量数据云处理系统部署及实现［J］. 光学精密工程， 2021， 29（6）： 1387-1396. doi: 10.37188/OPE.20212906.1387TANGJ， ZHANGR ZH， SHIZH Y. Deployment and Implementation of data cloud processing system for double-flank gear rolling test based on Javaweb［J］. Opt. Precision Eng.， 2021， 29（6）： 1387-1396. （in Chinese）. doi: 10.37188/OPE.20212906.1387

[3] [3] 3汤洁，刘小兵，李睿. 未知参数小模数齿轮齿距和齿廓偏差视觉测量［J］. 光学精密工程， 2021， 29（1）： 100-109. doi: 10.37188/OPE.20212901.0100TANGJ， LIUX B， LIR. Vision measurement of pitch and profile deviations for small modulus gears with unknown parameters［J］. Opt. Precision Eng.， 2021， 29（1）： 100-109. （in Chinese）. doi: 10.37188/OPE.20212901.0100

[4] [4] 4周佳艺，石照耀，南浩轩，等. 面向生产现场的注塑齿轮快速分选检测系统［J］. 光学精密工程， 2020， 28（9）： 2017-2026. doi: 10.37188/OPE.20202809.2017ZHOUJ Y， SHIZH Y， NANH X， et al. Rapid sorting and inspecting system for plastic gears in production site［J］. Opt. Precision Eng.， 2020， 28（9）： 2017-2026. （in Chinese）. doi: 10.37188/OPE.20202809.2017

[5] [5] 5国家质量监督检验检疫总局. 齿轮渐开线样板检定规程： JJG 332-2003［S］. 北京：中国计量出版社， 2004. doi: 10.3969/j.issn.1002-7203.2014.04.003General Administration of Quality Supervision， Inspection and Quarantine of the People's Republic of China. Verification Regulation of Gear Involute Masters： 332-2003JJG ［S］. Beijing： China Metrology Publishing House， 2004. （in Chinese）. doi: 10.3969/j.issn.1002-7203.2014.04.003

[6] [6] 6国家质量监督检验检疫总局. 齿轮测量中心校准规范： JJF 1561-2016［S］. 北京：中国质检出版社， 2016. doi: 10.3969/j.issn.1002-7203.2014.04.003General Administration of Quality Supervision， Inspection and Quarantine of the People's Republic of China. Calibration Specification for Gear Measuring centers： 1561-2016JJF ［S］. Beijing： China Quality Inspection Publishing House， 2016. （in Chinese）. doi: 10.3969/j.issn.1002-7203.2014.04.003

[7] [7] 7袁高峰，凌明. 具有三种基圆参数的齿轮渐开线样板： CN111521086A［P］. 2020-08-11.YUANG F， LINGM. Gear Involute Artifact with Three Base Circle Parameters. CN111521086A［P］. 2020-08-11. （in Chinese）

[8] [8] 8凌明，凌四营，刘祥生，等. 虑及计值范围的1级齿轮渐开线样板精密成型［J］. 仪器仪表学报， 2021， 42（11）： 35-44.LINGM， LINGS Y， LIUX SH， et al. Precision forming for class-1 gear involute artefact considering the evaluation range［J］. Chinese Journal of Scientific Instrument， 2021， 42（11）： 35-44. （in Chinese）

[9] [9] 9国家质量监督检验检疫总局，中国国家标准化管理委员会. 渐开线圆柱齿轮精度检验细则： GB/T 13924-2008［S］. 北京：中国标准出版社， 2008. doi: 10.3969/j.issn.1007-7871.2014.12.023General Administration of Quality Supervision， Inspection and Quarantine of the People's Republic of China， Standardization Administration of the People's Republic of China. Inspection Code for Accuracy of Involute Cylindrical Gears： 13924-2008GB/T ［S］. Beijing： Standards Press of China， 2008. （in Chinese）. doi: 10.3969/j.issn.1007-7871.2014.12.023

[10] [10] 10国家质量监督检验检疫总局. 计量比对规范： JJF 1117-2010［S］. 北京：中国质检出版社， 2010. doi: 10.3969/j.issn.1002-7203.2014.04.003General Administration of Quality Supervision， Inspection and Quarantine of the People's Republic of China. Measurement Comparison： 1117-2010JJF ［S］. Beijing： China Quality Inspection Publishing House， 2010. （in Chinese）. doi: 10.3969/j.issn.1002-7203.2014.04.003

[11] , 21-22(2013).

[12] , 21-22(2013).

[13] R FRAZER, R BICKER et al. An international comparison of involute gear profile and helix measurement. Metrologia, 41, 12(2003).

[14] V MAKAREVICH. Final report on supplementary comparison COOMET.L-S10： Comparison of length standards for measuring gear parameters. Metrologia, 49(2012).

[15] K KNIEL, N CHANTHAWONG, N EASTMAN et al. Supplementary comparison EURAMET.L-S24 on involute gear standards. Metrologia, 51(2014).

[16] K KNIEL, A WEDMANN, M STEIN et al. COOMET supplementary comparison L-S18 （project： 673/UA-a/15）. Metrologia, 55(2018).

[17] [17] 17凌明，凌四营，刘远航，等. 测头半径对1级渐开线样板齿廓偏差测量的影响［J］. 仪器仪表学报， 2022， 43（4）： 121-128.LINGM， LINGS Y， LIUY H， et al. Effect of probe radius on the measurement for profile deviations of class-1 gear involute artefact［J］. Chinese Journal of Scientific Instrument， 2022， 43（4）： 121-128. （in Chinese）

Tools

Get Citation

Copy Citation Text

Siying LING, Ming LING, Zhaoyao SHI, Lin BO, Liding WANG. Measurement comparison for class-1 gear involute artifact in China[J]. Optics and Precision Engineering, 2022, 30(22): 2869

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Micro/Nano Technology and Fine Mechanics

Received: Jul. 13, 2022

Accepted: --

Published Online: Nov. 28, 2022

The Author Email: LING Siying (lingsy@dlut.edu.cn)

DOI:10.37188/OPE.20223000.0392

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology