[2] ZHANG L, LIU H, YAO H et al. Preparation, microstructure, and properties of ZrO2 (3Y)/Al2O3 bioceramics for 3D printing of all-ceramic dental implants by vat photopolymerization. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1(2022).

[3] HE R J, ZHOU N P, ZHANG K Q et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 10(2021).

[4] ZHAN L, XIA Y, ZHANG X et al. Effects of stereolithography process parameters on the curing properties of Si3N4 ceramic slurries. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2(2023).

[5] YUAN J K, XIONG S F, CHEN Z W. Research trends and challenges of additive manufacturing of polymer-derived ceramics. Journal of Inorganic Materials, 38(2023).

[6] CRAMER C L, IONESCU E, GRACZYK-ZAJAC M et al. Additive manufacturing of ceramic materials for energy applications: road map and opportunities. Journal of the European Ceramic Society, 42(2022).

[7] KHANLAR L N, SALAZAR RIOS A, TAHMASEB A et al. Additive manufacturing of zirconia ceramic and its application in clinical dentistry: a review. Dentistry Journal (Basel), 9(2021).

[8] DÍAZ LANTADA A, DE BLAS ROMERO A, SCHWENTENWEIN M et al. Monolithic 3D labs- and organs-on-chips obtained by lithography-based ceramic manufacture. International Journal of Advanced Manufacturing Technology, 93, 9-12(2017).

[9] WANG H, HU K, CHENG M et al. Additive manufacturing of liquid-cooled ceramic heat sinks: an experimental and numerical study. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2(2023).

[10] CHEN Z, SONG X, LEI L et al. 3D printing of piezoelectric element for energy focusing and ultrasonic sensing. Nano Energy, 27, 78(2016).

[11] SCHEITHAUER U, KERBER F, FUSSEL A et al. Alternative process routes to manufacture porous ceramics-opportunities and challenges. Materials, 12(2019).

[12] KOVACEV N, LI S, LI W et al. Additive manufacturing of novel hybrid monolithic ceramic substrates. Aerospace, 9(2022).

[14] LI H, LIU Y, LIU Y et al. Silica strengthened alumina ceramic cores prepared by 3D printing. Journal of the European Ceramic Society, 41(2021).

[15] LI J, AN X, LIANG J et al. Recent advances in the stereolithographic three-dimensional printing of ceramic cores: challenges and prospects. Journal of Materials Science & Technology, 117, 79(2022).

[17] SCHMIDT J, ALTUN A A, SCHWENTENWEIN M et al. Complex mullite structures fabricated via digital light processing of a preceramic polysiloxane with active alumina fillers. Journal of the European Ceramic Society, 39(2019).

[18] LEE R T, CHENG W S, LEE C S et al. Mullite ceramic fabrication by 3D printing. Proceedings of the 7th International Conference on Mechanics and Materials in Design, Albufeira(2017).

[19] BOUVILLE F, MAIRE E, MEILLE S et al. Strong, tough and stiff bioinspired ceramics from brittle constituents. Nature Materials, 13(2014).

[20] BOUVILLE F. Strong and tough nacre-like aluminas: process- structure-performance relationships and position within the nacre- inspired composite landscape. Journal of Materials Research, 35(2020).

[21] LIBANORI R, CARNELLI D, ROTHFUCHS N et al. Composites reinforced via mechanical interlocking of surface-roughened microplatelets within ductile and brittle matrices. Bioinspiration & Biomimetics, 11(2016).

[22] NIEBEL T P, CARNELLI D, BINELLI M R et al. Hierarchically roughened microplatelets enhance the strength and ductility of nacre-inspired composites. Journal of the Mechanical Behavior of Biomedical Materials, 60, 367(2016).

[23] WESTBEEK S, VAN DOMMELEN J A W, REMMERS J J C et al. Influence of particle shape in the additive manufacturing process for ceramics. Computers & Mathematics with Applications, 78(2019).

[24] OZKAN B, SAMENI F, GOULAS A et al. Hot ceramic lithography of silica-based ceramic cores: the effect of process temperature on vat-photopolymierisation. Additive Manufacturing, 58, 103033(2022).

[25] WU X, XU C, ZHANG Z. Preparation and optimization of Si3N4ceramic slurry for low-cost LCD mask stereolithography. Ceramics International, 47(2021).

[26] QIAN C, HU K, LI J et al. The effect of light scattering in stereolithography ceramic manufacturing. Journal of the European Ceramic Society, 41(2021).

[30] TENG J, WU X, JIN Y et al. Effects of platelet addition and loading direction on the mechanical properties of textured alumina fabricated by ceramic mask stereolithography. Ceramics International, 49(2023).