Journal of Advanced Dielectrics, Volume. 11, Issue 3, 2140004(2021)

Influence of CuO addition on dielectric and piezoelectric properties of (Bi0.5Na0.5)TiO3BaTiO3lead-free piezoceramics

M. Difeo***, L. Ramajo*, and M. Castro*
Author Affiliations
  • Research Institute of Materials Science and Technology (INTEMA), UNMdP – CONICET Av. Colón 10850, B7606BWV Mar del Plata, Argentina
  • show less
    References(24)

    [1] [1] JinC. C.,WangF. F.,WeiL. L.,TangJ.,LiY.,YaoQ. R.,TianC. Y. andShiW. Z.,Influence of B-site complexion substitution on the structure and electrical properties in Bi0.5Na0.5TiO3-based lead-free solid solutions,J. Alloys Compd.585,185(2014).

    [2] [2] KangW. S. andKohJ. H.,(1−x)Bi0.5Na0.5TiO3–xBaTiO3 lead-free piezoelectric ceramics for energy-harvesting applications,J. Eur. Ceram. Soc.35,2057(2015).

    [3] [3] ShroutT. andZhangS.,Lead-free piezoelectric ceramics: Alternatives for PZT?,J. Electroceramics19,113(2007).

    [5] [5] KangW.-S.,LeeS.-K. andKohJ.-H.,AC conductivity and dielectric properties of (Bi,Na)TiO3–BaTiO3 lead-free ceramics,Ceram. Int.41,6925(2015).

    [6] [6] DittmerR.,WebberK. G.,AulbachE.,JoW.,TanX. andRödelJ.,Electric-field-induced polarization and strain in 0.94(Bi1/2Na1/2) TiO3–0.06 BaTiO3 under uniaxial stress,Acta Mater.61,1350(2013).

    [7] [7] CerneaM.,TrupinaL.,DragoiC.,VasileB. S. andTruscaR.,Structural and piezoelectric characteristics of BNT–BT0.05 thin films processed by sol–gel technique,J. Alloys Compd.515,166(2012).

    [8] [8] TakenakaT. andSakataK.,Dielectric, piezoelectric and pyroelectric properties of (BiNa)1/2TiO3-based ceramics,Ferroelectrics95,153(1988).

    [9] [9] ZhaoM.-L.,WangC.-L.,WangJ.-F.,ChenH.-C. andZhongW.-L.,Enhanced piezoelectric properties of (Bi0.5Na0.5)1−xBaxTiO3 lead-free ceramics by sol-gel method,Acta Phys. Sin.53,2357(2004).

    [10] [10] MaC.,TanX.,Dul’KinE. andRothM.,Domain structure-dielectric property relationship in lead-free (1−x)(Bi1/2Na1/2)-TiO3–xBaTiO3 ceramics,J. Appl. Phys.108,104105(2010).

    [11] [11] MaC. andTanX.,Phase diagram of unpoled lead-free (1−x)- (Bi1/2Na1/2)TiO3–xBaTiO3 ceramics,Solid State Commun.150,1497(2010).

    [12] [12] MatsubaraM.,YamaguchiT.,KikutaK. andHiranoS.,Sinterability and piezoelectric properties of (K,Na)NbO3ceramics with novel sintering aid,J. Appl. Phys.43,7159(2004).

    [13] [13] ParkH.-Y.,ChoiJ.-Y.,ChoiM.-K.,ChoK.-H.,NahmS.,LeeH.-G. andKangH.-W.,Effect of CuO on the sintering temperature and piezoelectric properties of (Na0.5K0.5)NbO3 lead-free piezoelectric ceramics,J. Am. Ceram. Soc.91,2374(2008).

    [14] [14] JoW.et al.,CuO as a sintering additive for (Bi1/2Na1/2)TiO3–BaTiO3–(K0.5Na0.5)NbO3 lead-free piezoceramics,J. Eur. Ceram. Soc.31,2107(2011).

    [15] [15] ZhaoZ.-H.,GeyR.-F. andDaiY.,Large electro-strain signal of the BNT–BT–KNN lead-free piezoelectric ceramics with CuO doping,J. Adv. Dielect.9,1950022(2019).

    [16] [16] WangT.,WangD.,LiaoY.,ZhengQ.,SunH.,KwokK. W.,JiangN.,JieW.,XuC. andLinD.,Defect structure, ferroelectricity and piezoelectricity in Fe/Mn/Cu-doped K0.5Na0.5NbO3 lead-free piezoelectric ceramics,J. Eur. Ceram. Soc.38,4915(2018).

    [17] [17] RoutD.,MoonK.-S.,RaoV. andKangS.-J.,Study of the morphotropic phase boundary in the lead-free Na1/2Bi1/2TiO3-BaTiO3 system by Raman spectroscopy,J. Ceram. Soc. Jpn.117,797(2009).

    [18] [18] Wylie-van EerdB.,DamjanovicD.,KleinN.,SetterK. andTrodahlJ.,Structural complexity of (Na0.5Bi0.5)TiO3-BaTiO3 as revealed by Raman spectroscopy,Phys. Rev. B82,104112(2010).

    [19] [19] EspinosaA.,CamargoJ.,del CampoA.,Rubio-MarcosF.,CastroM. andRamajoL.,Exploring new methodologies for the identification of the morphotropic phase boundary region in the (BiNa)TiO3-BaTiO3 lead free piezoceramics: Confocal Raman microscopy,J. Alloys Compd.739,799(2018).

    [20] [20] XuQ.,SongZ.,TangW.,HaoH.,ZhangL.,AppiahM.,CaoM.,YaoZ.,HeZ. andLiuH.,Ultra-wide temperature stable dielectrics based on Bi0.5Na0.5TiO3–NaNbO3 system,J. Am. Ceram. Soc.98,3119(2015).

    [21] [21] AnthoniappenJ.,TuC. S.,ChenP.-Y.,ChenC.-S.,IdzerdaY. U. andChiuS.-J.,Raman spectra and structural stability in B-site manganese doped (Bi0.5Na0.5)0.925Ba0.075TiO3 relaxor ferroelectric ceramics,J. Eur. Ceram. Soc.35,3495(2015).

    [22] [22] JiaY.,WeiX.,XuL.,WangC.,LianP.,XueS. andShiY.,Multiphysics vibration FE model of piezoelectric macro fibre composite on carbon fibre composite structures,Compos. B, Eng.161,376(2019).

    [23] [23] ZhuS.,CaoL.,XiongZ.,LuC. andGaoZ.,Enhanced piezoelectric properties of 3-1 type porous 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 ferroelectric ceramics,J. Eur. Ceram. Soc.38,2251(2017).

    [24] [24] PrasertpalichatS.,SiritanonT.,NuntawongN. andCannD. P.,Structural characterization of A-site nonstoichiometric (1−x)Bi0.5Na0.5TiO3–xBaTiO3 ceramics,J. Mater. Sci.54,1162(2018).

    [25] [25] VöglerM.,DanielsJ. E. andWebberK. G.,Absence of toughening behavior in 0.94(Na0.5Bi0.5)TiO3-0.06 BaTiO3 relaxor ceramic,Scr. Mater.136,115(2017).

    Tools

    Get Citation

    Copy Citation Text

    M. Difeo, L. Ramajo, M. Castro. Influence of CuO addition on dielectric and piezoelectric properties of (Bi0.5Na0.5)TiO3BaTiO3lead-free piezoceramics[J]. Journal of Advanced Dielectrics, 2021, 11(3): 2140004

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Research Articles

    Received: Feb. 23, 2021

    Accepted: May. 4, 2021

    Published Online: Feb. 22, 2022

    The Author Email: Difeo M. (maurodifeo@fi.mdp.edu.ar), Ramajo L. (maurodifeo@outlook.com.ar), Castro M. (maurodifeo@outlook.com.ar)

    DOI:10.1142/S2010135X2140004X

    Topics