[2] [2] CHEN Z, CHANG R C, PEI X J, et al. Tunnel geothermal disaster susceptibility evaluation based on interpretable ensemble learning: A case study in Ya’an–Changdu section of the Sichuan–Tibet traffic corridor[J]. Eng Geol, 2023, 313: 106985.

[3] [3] LIN M, ZHOU P, JIANG Y F, et al. Numerical investigation on comprehensive control system of cooling and heat insulation for high geothermal tunnel: A case study on the highway tunnel with the highest temperature in China[J]. Int J Therm Sci, 2022, 173: 107385.

[11] [11] ALAWI AL-SODANI K A, AL-ZAHRANI M M, MASLEHUDDIN M, et al. Chloride diffusion models for Type I and fly ash cement concrete exposed to field and laboratory conditions[J]. Mar Struct, 2021, 76: 102900.

[13] [13] XIE H B, WANG Y F, GONG J, et al. Effect of global warming on chloride ion erosion risks for offshore RC bridges in China[J]. KSCE J Civ Eng, 2018, 22(9): 3600–3606.

[15] [15] JI Y S, ZHAN G M, TAN Z C, et al. Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products[J]. Constr Build Mater, 2015, 79: 214–222.

[17] [17] DING Q M, GAO Y N, LIU R Y, et al. Corrosion behavior of HRB400 and HRB400M steel bars in concrete under DC interference[J]. Sci Rep, 2021, 11(1): 23871.

[19] [19] TIAN Y, ZHANG G Y, YE H L, et al. Corrosion of steel rebar in concrete induced by chloride ions under natural environments[J]. Constr Build Mater, 2023, 369: 130504.

[21] [21] WEN Y, MA X M, CAI Y X, et al. Corrosion inhibition mechanism of vitamins on steel bars in chloride environments: Experimental analysis and quantum chemical calculation[J]. Constr Build Mater, 2023, 406: 133424.

[24] [24] XU P, JIANG L H, GUO M Z, et al. Influence of sulfate salt type on passive film of steel in simulated concrete pore solution[J]. Constr Build Mater, 2019, 223: 352–359.

[30] [30] POURSAEE A, HANSSON C M. Reinforcing steel passivation in mortar and pore solution[J]. Cem Concr Res, 2007, 37(7): 1127–1133.

[33] [33] NIU D T, ZHANG S H, WANG Y, et al. Effect of temperature on the strength, hydration products and microstructure of shotcrete blended with supplementary cementitious materials[J]. Constr Build Mater, 2020, 264: 120234.

[34] [34] ZHANG S H, WANG Y, TONG Y P, et al. Flexural toughness characteristics of basalt fiber reinforced shotcrete composites in high geothermal environment[J]. Constr Build Mater, 2021, 298: 123893.

[35] [35] LIU Y Q, GUAN X D, SHI J J. Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions[J]. Cem Concr Compos, 2024, 145: 105366.

[37] [37] XU L J, WU P G, ZHU X J, et al. Structural characteristics and chloride intrusion mechanism of passive film[J]. Corros Sci, 2022, 207: 110563.

[38] [38] ZHOU B B, GU X L, GUO H Y, et al. Polarization behavior of activated reinforcing steel bars in concrete under chloride environments[J]. Constr Build Mater, 2018, 164: 877–887.

[40] [40] KLEIN N, GMEZ E D, DUFF G S, et al. Effect of sulphate on the corrosion of reinforcing steel in concrete[J]. Constr Build Mater, 2022, 354: 129214.

[41] [41] CHEN Y J, GAO J M, TANG L P, et al. Resistance of concrete against combined attack of chloride and sulfate under drying–wetting cycles[J]. Constr Build Mater, 2016, 106: 650–658.

[42] [42] TANG F J, CHEN G D, BROW R K. Chloride-induced corrosion mechanism and rate of enamel- and epoxy-coated deformed steel bars embedded in mortar[J]. Cem Concr Res, 2016, 82: 58–73.

[44] [44] CHEN Z, WU L Y, BINDIGANAVILE V, et al. Coupled models to describe the combined diffusion-reaction behaviour of chloride and sulphate ions in cement-based systems[J]. Constr Build Mater, 2020, 243: 118232.