[1] [1] CHARITIDIS C A. Nanomechanical and nanotribological properties of carbon-based thin films: A review ［J］. International Journal of Refractory Metals & Hard Materials, 2010, 28(1):51-70.

[2] [2] ROBERTSON J. Diamond-like amorphous carbon ［J］. Materials Science and Engineering R, 2002, 37(4-6):129-131.

[3] [3] FUJIMTO A, OKADA M. Thermal durability of diamond like carbon films containing tungsten fabricated ［J］. Japanese Journal of Applied Physics, 2012, 51: 06FD07-1-5.

[4] [4] J H ZHENG, M KATO, K NAKASA. Effect of intermediate layer on wear-delaminating life of low-frictional SiC-2.6mass% Ti film sputter-deposited on titanium substrate ［J］. Surface & Coatings Technology, 2010, 205(7):2532-2537.

[5] [5] SHUN L L, DAI W, ZHANG D,et al.. The effect of Cr-doped and Cr interlayer on adhesive strength of diamond-like carbon films ［J］. China surface engineering, 2010, 23(4):26-34. (in Chinese)

[6] [6] WANG Y F. A Study on Preparation and Tribological Properties of Composite DLC Films ［D］. Lanzhou：Lanzhou University graduate thesis, 2012,6. (in Chinese)

[7] [7] YANG F Z, SHENG L R, GAO C, et al.. Properties of diamond-like carbon films were deposited on 316 stainless steel ［J］. Journal of Functional Materials, 2012, 43(15):1994-1997. (in Chinese)

[8] [8] DENG J G, BRAUN M. Residual stress and microhardness of DLC multilayer coatings ［J］. Diamond and Related Materials, 1996, 5 (3): 478-482.

[9] [9] MA F, LI G. Diamond-like Carbon gradient film prepared by unbalanced magnetron sputtering and plasma immersion ion implantation hybrid technique ［J］. Materials Letters, 2002, 57(1): 82-86.

[10] [10] ENDO K, TATSUMI T. Deposition of silicon dioxide films on amorphous carbon films by plasma enhanced chemical vapor deposition for low dielectric constant interlayer dielectrics ［J］. Applied Physics Letters, 1997, 70(9):1078- 1079.

[11] [11] ADACHI Y, AOKI Y, OHTAKE N. Tribological characterizations of DLC film with segment structure under oil lubrication ［J］. Transactions of the Japan Society of Mechanical Engineers, Ser. C, 2007, 74(737):169-173. (in Japanese)

[12] [12] JIA Z, XIA Y, PANG X. Tribological behaviors of different Diamond-like carbon coatings on nitrided mild steel lubricated with benzotriazole-containing borate esters ［J］. Tribology Letters, 2011,41(1):247-256.

[13] [13] HUANG L Y, XU K W. Elasto-plastic deformation and fracture mechanism analysis of Diamond-like carbon film in Nano-scratch ［J］. Acia Metallurgica Sinica, 2001,37(17):733-736. (in Chinese)

[14] [14] ZHENG J H, CHEN Y. A study on interface strength of a-Si:H-DLC film ［J］. Advanced Materials Research, 2011, 179-180:775-780.

[15] [15] ZHENG J H. Deposition equipment of DLC films with high interfacial strength at room temperature ［P］. Patent No. ZL 2010 2 0673327.2，2011. (in Chinese)

[16] [16] ZHENG J H. Deposition equipment and method of DLC films with high interfacial strength at room temperature. China:ZL 2010 1 0599609［P］.2012-07. (in Chinese)

[17] [17] LIAO J X, XIA L F, SUN Y. The tribological properties of AlN/DLC modified layer on 2024 aluminum alloy implanted with nitrogen and carbon by plasma based ion implantation［J］. Tribology, 2001, 21(5): 324-329. (in Chinese)