[1] Knappe R, Haloui H, Seifert A et al. Scaling ablation rates for picosecond lasers using burst micromachining[J]. Proceedings of SPIE, 7585, 150-155(2010).

[2] Chen L, Liu X D, Liu J et al. Microgroove etching with femtosecond laser on quartz glass surfaces[J]. Acta Optica Sinica, 40, 2314001(2020).

[3] Clubley D A, Bell A S, Friel G. High average power Nd∶YVO4 based pico-second regenerative amplifier[J]. Proceedings of SPIE, 6871, 68711D(2008).

[4] Bai X, Chen F. Recent advances in femtosecond laser-induced superhydrophobic surfaces[J]. Acta Optica Sinica, 41, 0114003(2021).

[5] Qiao L L, Wang M, Wu R B et al. Ultra-low loss lithium niobate photonics[J]. Acta Optica Sinica, 41, 0823012(2021).

[6] Dai C, Wang Y, Miao Z M et al. Generation and application of high-order harmonics based on interaction between femtosecond laser and matter[J]. Laser & Optoelectronics Progress, 58, 0300001(2021).

[7] Bobrinetskiy I I, Emelianov A V, Otero N et al. Patterned graphene ablation and two-photon functionalization by picosecond laser pulses in ambient conditions[J]. Applied Physics Letters, 107, 043104(2015).

[8] Sclafani M, Pullen M G, Wolter B et al. Molecular structure from aligned polyatomic molecules using laser-induced electron diffraction[C](2015).

[9] Bai C, Tian W L, Wang G Y et al. Progress on Yb-doped all-solid-state femtosecond laser amplifier with high repetition rate[J]. Chinese Journal of Lasers, 48, 0501005(2021).

[10] Caracciolo E, Kemnitzer M, Guandalini A et al. 28-W, 217 fs solid-state Yb∶CAlGdO4 regenerative amplifiers[J]. Optics Letters, 38, 4131-4133(2013).

[11] Starke K, Gross T, Ristau D et al. Laser-induced damage threshold of optical components for high-repetition-rate Nd∶YAG lasers[J]. Proceedings of SPIE, 3578, 584-593(1999).

[12] Kamimura T, Kawaguchi Y, Arii T et al. Investigation of bulk laser damage in transparent YAG ceramics controlled with microstructural refinement[J]. Proceedings of SPIE, 7132, 713215(2008).

[13] Chen Z, yang L, Wang X Y et al. Highly transparent terbium gallium garnet crystal fabricated by the floating zone method for visible-infrared optical isolators[J]. Optical Materials, 46, 12-15(2015).

[14] Zheng D H, Wu J, Shang J F et al. Progress on electro-optic crystals for Q-switches[J]. Scientia Sinica (Technologica), 47, 1139-1148(2017).

[15] von Grafenstein L, Bock M, Ueberschaer D et al. Picosecond 34 mJ pulses at kHz repetition rates from a Ho∶YLF amplifier at 2 µm wavelength[J]. Optics Express, 23, 33142-33149(2015).

[16] Novák J, Green J T, Metzger T et al. Thin disk amplifier-based 40 mJ, 1 kHz, picosecond laser at 515 nm[J]. Optics Express, 24, 5728-5733(2016).

[17] Huang Y T, Fan Z W, Niu G et al. 100 kHz repetition rate picosecond regenerative amplifier with high pulse stability[J]. Chinese Journal of Lasers, 39, 0502009(2012).

[18] Wang L L, Niu G, Shi Z H et al. 1.3 μm picosecond regenerative amplifier with high pulse energy[J]. Chinese Journal of Lasers, 39, 1102007(2012).

[19] Sahraee M, Fallah H R, Moradi B et al. Design and fabrication of thin-film polarizer at wavelength of 1540 nm and investigation of its laser-induced damage threshold[J]. The European Physical Journal Plus, 129, 277(2014).