[1] V. Gapontsev, V. Fomin, A. Ferin et al. Diffraction limited ultra-high-power fiber lasers. Lasers Sources and Related Photonic Devices, AWA1(2010).

[2] J. Hecht. High-power fiber lasers. Opt. Photonics News, 29, 30(2018).

[3] C. Jauregui, J. Limpert, A. Tünnermann. High-power fibre lasers. Nat. Photonics, 7, 861(2013).

[4] X. Chen, T. Yao, L. Huang et al. Functional fibers and functional fiber-based components for high-power lasers. Adv. Fiber Mater., 5, 59(2023).

[5] R. Paschotta, J. Nilsson, P. R. Barber et al. Lifetime quenching in Yb-doped fibres. Opt. Commun., 136, 375(1997).

[6] S. Taccheo, H. Gebavi, A. Monteville et al. Concentration dependence and self-similarity of photodarkening losses induced in Yb-doped fibers by comparable excitation. Opt. Express, 19, 19340(2011).

[7] H.-J. Otto, N. Modsching, C. Jauregui et al. Impact of photodarkening on the mode instability threshold. Opt. Express, 23, 15265(2015).

[8] C. Jauregui, H.-J. Otto, F. Stutzki et al. Simplified modelling the mode instability threshold of high power fiber amplifiers in the presence of photodarkening. Opt. Express, 23, 20203(2015).

[9] R. Tao, P. Ma, X. Wang et al. Influence of core NA on thermal-induced mode instabilities in high power fiber amplifiers. Laser Phys. Lett., 12, 085101(2015).

[10] M. Li, X. Chen, A. Liu et al. Limit of effective area for single-mode operation in step-index large mode area laser fibers. J. Light. Technol., 27, 3010(2009).

[11] Y. Jeong, J. K. Sahu, D. N. Payne et al. Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. Opt. Express, 12, 6088(2004).

[12] V. Khitrov, J. D. Minelly, R. Tumminelli et al. 3 kW single-mode direct diode-pumped fiber laser. Proc. SPIE, 8961, 89610V(2014).

[13] D. Jain, Y. Jung, P. Barua et al. Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers. Opt. Express, 23, 7407(2015).

[14] L. Huang, T. Yao, J. Leng et al. Mode instability dynamics in high-power low-numerical-aperture step-index fiber amplifier. Appl. Opt., 56, 5412(2017).

[15] F. Beier, C. Hupel, J. Nold et al. Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier. Opt. Express, 24, 6011(2016).

[16] F. Beier, C. Hupel, S. Kuhn et al. Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier. Opt. Express, 25, 14892(2017).

[17] F. Beier, F. Möller, B. Sattler et al. Experimental investigations on the TMI thresholds of low-NA Yb-doped single-mode fibers. Opt. Lett., 43, 1291(2018).

[18] Y. Midilli, B. Ortaç. Demonstration of an all-fiber ultra-low numerical aperture ytterbium-doped large mode area fiber in a master oscillator power amplifier configuration above 1 kW power level. J. Light. Technol., 38, 1915(2020).

[19] F. Zhang, Y. Xing, L. Liao et al. Thermo-optic behaviour of intrinsically single-mode low-numerical aperture (NA) ytterbium-doped fibre. Laser Phys., 29, 075106(2019).

[20] R. Liu, D. Yan, Z. Fan et al. Fabrication and 1046 nm laser behaviors of Yb-doped phosphosilicate binary fiber with a pedestal structure. Opt. Mater. Express, 10, 464(2020).

[21] D. J. DiGiovanni. Fabrication of rare-earth-doped optical fiber. Proc. SPIE, 1373, 2(1991).

[22] E. H. Sekiya, P. Barua, K. Saito et al. Fabrication of Yb-doped silica glass through the modification of MCVD process. J. Non-Cryst. Solids, 354, 4737(2008).

[23] D. Marcuse. Curvature loss formula for optical fibers. J. Opt. Soc. Am., 66, 216(1976).

[24] H. J. Otto, F. Stutzki, F. Jansen et al. Temporal dynamics of mode instabilities in high-power fiber lasers and amplifiers. Opt. Express, 20, 15710(2012).

[25] K. Hejaz, A. Norouzey, R. Poozesh et al. Controlling mode instability in a 500 W ytterbium-doped fiber laser. Laser Phys., 24, 025102(2014).

[26] N. Haarlammert, B. Sattler, A. Liem et al. Investigations of mode instabilities in low-NA reduced mode overlap photonic crystal fibers. European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference, CJ_10_3(2015).

[27] Y. Wan, X. Xi, B. Yang et al. Enhancement of TMI threshold in Yb-doped fiber laser by optimizing pump wavelength. IEEE Photon. Technol. Lett., 33, 656(2021).

[28] B. Yang, P. Wang, H. Zhang et al. 6 kW single mode monolithic fiber laser enabled by effective mitigation of the transverse mode instability. Opt. Express, 29, 26366(2021).

[29] R. Tao, P. Ma, X. Wang et al. Mitigating of modal instabilities in linearly-polarized fiber amplifiers by shifting pump wavelength. J. Opt., 17, 45504(2015).

[30] R. Tao, P. Ma, X. Wang et al. Theoretical study of pump power distribution on modal instabilities in high power fiber amplifiers. Laser Phys. Lett., 14, 025002(2017).

[31] K. Hejaz, M. Shayganmanesh, R. Rezaei-Nasirabad et al. Modal instability induced by stimulated Raman scattering in high-power Yb-doped fiber amplifiers. Opt. Lett., 42, 5274(2017).

[32] R. Sidharthan, D. Lin, K. J. Lim et al. Ultra-low NA step-index large mode area Yb-doped fiber with a germanium doped cladding for high power pulse amplification. Opt. Lett., 45, 3828(2020).