[1] ZHI-HUA YANG, BIN LIANG, DE-CHANG JIA et al. Amorphous silicoboron carbonitride monoliths resistant to flowing air up to 1800 ℃. Corros. Sci., 109, 162-173(2016).

[2] ZHI-HUA YANG, YANG MIAO, BIN LIANG et al. Oxidation behavior of SiBCN-Zr composites at 1500 ℃ prepared by reactive spark plasma sintering. Coros. Sci., 132, 293-299(2018).

[3] BIAO LU, YUE ZHANG. Oxidation behavior of SiC-SiBCN ceramics. Ceram. Int., 41, 1023-1030(2015).

[4] DA-XIN LI, ZHI-HUA YANG, DE-CHANG JIA et al. High- temperature oxidation behavior of dense SiBCN monoliths: carboncontent dependent oxidation structure, kinetics and mechanisms. Corros. Sci., 124, 103-120(2017).

[5] BIN LIANG, ZHI-HUA YANG, YUE-TONG LI et al. Ablation behavior and mechanism of SiC_f/C_f/SiBCN ceramic composites with improved thermal shock resistance under oxyacetylene combustion flow. Ceram. Int., 41, 8868-8877(2015).

[6] DAXIN LI, ZHI-HUA YANG, DE-CHANG JIA et al. Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame. Corros. Sci., 100, 85-100(2015).

[7] JIA-YING WANG, XIAO-MING DUAN, ZHI-HUA YANG et al. Ablation mechanism and properties of SiC_f/SiBCN ceramic composites under an oxyacetylene torch environment. Corros. Sci., 82, 101-107(2014).

[8] YANG MIAO, ZHI-HUA YANG, QI-SHUAI ZHU et al. Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering. Ceram. Int., 43, 7978-7983(2017).

[9] DA-XIN LI, ZHI-HUA YANG, DE-CHANG JIA et al. Carbon content-dependent microstructures, surface characteristics and thermal stability of mechanical alloying derived SiBCN powders. Ceram. Int., 44, 3614-3624(2018).

[10] ZHI-HUA YANG, YU ZHOU, DE-CAHNG JIA et al. Microstructures and properties of SiB_0.5C_1.5N_0.5 ceramics consolidated by mechanical alloying and hot pressing. Mat. Sci. and Eng. A, 489, 187-192(2008).

[11] DA-XIN LI, ZHI-HUA YANG, ZHU-BO MAO et al. Microstructures, mechanical properties and oxidation resistance of SiBCN ceramics with the addition of MgO, ZrO₂ and SiO₂(MZS) as sintering additives. RSC Adv., 5, 52194-52205(2015).

[12] DA-XIN LI, ZHI-HUA YANG, DE-CHANG JIA et al. Preparation, microstructures, mechanical properties and oxidation resistance of SiBCN/ZrB₂-ZrN ceramics by reactive hot pressing. J. Euro. Ceram. Soc., 35, 4399-4410(2015).

[13] DA-XIN LI, ZHI-HUA YANG, DE-CHANG JIA et al. Effects of boron addition on the high temperature oxidation resistance of dense SiBCN monoliths at 1500 ℃. Corrs. Sci., 126, 10-25(2017).

[14] YANG MIAO, ZHI-HUA YANG, JIAN-CUN RAO et al. Influence of Sol-Gel derived ZrB₂ additions on microstructure and mechanical properties of SiBCN composites. Ceram. Int., 43, 4372-4378(2017).

[15] BAO-JUN TANG, ZE-LONG FENG, SHU-JUAN HU et al. Preparation and anti-oxidation characteristics of ZrSiO₄-SiBCN(O) amorphous coating. Appl Surf Sci., 331, 490-496(2015).

[16] YANG YANG, KE-ZHI LI, ZI-GANG ZHANG et al. Ablation resistance of HfC-SiC coating prepared by supersonic atmospheric plasma spraying for SiC-coated C/C composites. Ceram. Int., 42, 4768-4774(2016).

[17] JIA YUAN, XIN-GANG LUAN, RALF RIEDEL et al. Preparation and hydrothermal corrosion behavior of C_f/SiCN and C_f/SiHfBCN ceramic matrix composites. J. Euro. Ceram. Soc., 35, 3329-3337(2015).

[18] YU-QUAN WEI, YONG YANG, MENG LIU et al. Effect of HfC addition on ablation behavior of SiBCN ceramics. Ceram. Int.(2019). https://www.ncbi.nlm.nih.gov/pubmed/32287834

[19] R SUJITH, A B KOUSAALYA, R KUMAR. Coarsening induced phase transformation of Hafnia in polymer-derived Si-Hf-C-N-O Ceramics. Am. Ceram. Soc., 94, 2788-2791(2011).

[20] HANS-JOACHIM KLEEBE, KATHARINA NONNENMACHER, EMANUEL IONESCU. Decomposition-coarsening model of SiOC/HfO₂ ceramic nanocomposites upon isothermal anneal at 1300 ℃. J. Am. Ceram. Soc., 95, 2290-2297(2012).

[21] PENG-FEI ZHANG, DE-CHANG JIA, ZHI-HUA YANG. Crystallization and microstructural evolution process from the mechanically alloyed amorphous SiBCN powder to the hot-pressed nano SiC/BN(C) ceramic. J. Mat. Sci., 47, 7291-7304(2012).

[22] Y H XIONG, C S XIONG, S Q WEI et al. Study on the bonding state for carbon-boron nitrogen with different ball milling time. Appl. Surf. Sci., 253, 2515-2521(2006).

[23] ZHI-HUA YANG, DE-CAHNG JIA, YU ZHOU et al. Fabrication and characterization of amorphous SiBCN powders. Ceram. Int., 33, 1573-1577(2007).

[24] Y BLUM, HANS-JOACHIM KLEEBE. Chemical reactivities of hafnium and its derived boride, carbide and nitride compounds at relatively mild temperature. J.Mat. Sci., 39, 6023-6042(2004).