[1] D C HAYS, K B JUNG, Y B HAHN et al. Comparison of F₂-based gases for high-rate dry etching of Si. Journal of the Electrochemical Society, 146, 3812-3816(1999).

[2] S YAMAMOTO, M TANAKA, H SUNAMI et al. Effect of honeycomb-patterned surface topography on the adhesion and signal transduction of porcine aortic endothelial cells. Langmuir, 23, 8114-8120(2007).

[3] S W CHOI, Y ZHANG, Y N XIA. Three-dimensional scaffolds for tissue engineering： the importance of uniformity in pore size and structure. Langmuir, 26, 19001-19006(2010).

[4] R SHIMURA, H YABU et al. Biomimetic antibiofouling oil infused honeycomb films fabricated using breath figures. Polymer Journal, 53, 713-717(2021).

[5] H YABU, Y MATSUO, T YAMADA et al. Highly porous magnesium silicide honeycombs prepared by magnesium vapor annealing of silica-coated polymer honeycomb films toward ultralightweight thermoelectric materials. Chemistry of Materials, 32, 10176-10183(2020).

[6] S KAMAT, X SU, R BALLARINI et al. Structural basis for the fracture toughness of the shell of the conch Strombus gigas. Nature, 405, 1036-1040(2000).

[7] O KARTHAUS, N MARUYAMA, X CIEREN et al. Water-assisted formation of micrometer-size honeycomb patterns of polymers. Langmuir, 16, 6071-6076(2000).

[8] A A OSIPOV, G A IANKEVICH, A B SPESHILOVA et al. OES diagnostics as a universal technique to control the Si etching structures profile in ICP. Scientific Reports, 12, 5287(2022).

[9] L F AGUINSKY, F RODRIGUES, G WACHTER et al. Phenomenological modeling of low-bias sulfur hexafluoride plasma etching of silicon. Solid-State Electronics, 191, 108262(2022).

[10] [10] 10庄须叶， 陈丙根， 李平华， 等. 基于硅各向同性腐蚀工艺的三维曲面壳体微谐振器制备技术［J］. 光学 精密工程， 2019， 27（6）：1293-1300. doi: 10.3788/ope.20192706.1293ZHUANGX Y， CHENB G， LIP H， et al. Fabrication of microscale axial symmetric three-dimensional curved shell resonators based on silicon isotropic wet etching［J］. Opt. Precision Eng.， 2019， 27（6）：1293-1300. （in Chinese）. doi: 10.3788/ope.20192706.1293

[11] X Y ZHUANG, B G CHEN, P H LI et al. Fabrication of microscale axial symmetric three-dimensional curved shell resonators based on silicon isotropic wet etching. Optics and Precision Engineering, 27, 1293-1300(2019).

[12] H ASOH, K FUJIHARA. Triangle pore arrays fabricated on Si （111） substrate by sphere lithography combined with metal-assisted chemical etching and anisotropic chemical etching. Nanoscale Research Letters, 7, 406(2012).

[13] [13] 13谢常青. 衍射光学元件成套制造技术研究进展［J］. 光学 精密工程， 2022， 30（15）： 1815-1827. doi: 10.37188/OPE.20223015.1815XIECH Q. Research progress on complete fabrication technology of diffractive optical elements［J］. Opt. Precision Eng.， 2022， 30（15）： 1815-1827.（in Chinese）. doi: 10.37188/OPE.20223015.1815

[14] Y WU, P Y WANG, C M ZHEN et al. Fabrication and optical properties of the Si honeycomb structure via colloidal monolayer template. Journal of Porous Materials, 25, 23-28(2018).

[15] M YONEDA, N FUJIWARA. Developments of plasma etching technology for fabricating semiconductor devices. Japanese Journal of Applied Physics, 47, 1435-1455(2008).

[16] [16] 16常改艳， 王玉恒， 程光华. 超快贝塞尔光束在硫化锌晶体表面制备纳米孔［J］. 中国光学， 2021， 14（1）：213-225. doi: 10.37188/CO.2020-0101CHANGG Y， WANGY H， CHENGG H. Writing nanopores on a ZnS crystal with ultrafast Bessel beams［J］. Chinese Journal of Optics， 2021， 14（1）：213-225. （in Chinese）. doi: 10.37188/CO.2020-0101

[17] J C ARNOLD, D C GRAY, H H SAWIN. Influence of reactant transport on fluorine reactive ion etching of deep trenches in silicon. Journal of Vacuum Science & Technology B： Microelectronics and Nanometer Structures Processing， Measurement， and Phenomena, 11, 2071-2080(1993).

[18] L H WANG, M J LIU, J Y ZHAO et al. Batch fabrication of silicon nanometer tip using isotropic inductively coupled plasma etching. Micromachines, 11, 638(2020).

[19] P PANDURANGA, A ABDOU, Z REN et al. Isotropic silicon etch characteristics in a purely inductively coupled SF₆ plasma. Journal of Vacuum Science & Technology B， Nanotechnology and Microelectronics： Materials， Processing， Measurement， and Phenomena, 37(2019).