[1] BARSOUM M W. The M_N+1AX_N phases: a new class of solids; thermodynamically stable nanolaminates[J]. Progress in Solid State Chemistry, 28, 201-281(2000).

[2] SOKOL M, NATU V, KOTA S et al. On the chemical diversity of the MAX phases[J]. Trends in Chemistry, 1, 210-223(2009).

[3] EKLUND P, BECKERS M, JANSSON U et al. The M_n+1AX_n phases: materials science and thin-film processing[J]. Thin Solid Films, 518, 1851-1878(2010).

[4] WHITTLE K R, BLACKFORD M, AUGHTERSON M R et al. Radiation tolerance of M_n+1AX_n phases, Ti₃AlC₂ and Ti₃SiC₂[J]. Acta Materialia, 58, 4362-4368(2010).

[5] FASHANDI H, DAHLQVIST M, LU J et al. Synthesis of Ti₃AuC₂, Ti₃Au₂C₂ and Ti₃IrC₂ by noble metal substitution reaction in Ti₃SiC₂ for high-temperature-stable Ohmic contacts to SiC[J]. Nature Materials, 16, 814-818(2017).

[6] WARD J, BOWDEN D, PRESTAT E et al. Corrosion performance of Ti₃SiC₂, Ti₃AlC₂, Ti₂AlC and Cr₂AlC MAX phases in simulated primary water conditions[J]. Corrosion Science, 39, 444-453(2018).

[7] ZHU Y, ZHOU A, JI Y et al. Tribological properties of Ti₃SiC₂ coupled with different counterfaces[J]. Ceramics International, 41, 6950-6955(2012).

[8] NAGUIB M, KURTOGLU M, PRESSER V et al. Two-dimensional nanocrystals produced by exfoliation of Ti₃AlC₂[J]. Advanced Materials, 23, 4248-4253(2011).

[9] LUKATSKAYA M R, MASHTALIR O, REN C E et al. Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide[J]. Science, 341, 1502-1505(2013).

[10] ANASORI B, LUKATSKAYA M R, GOGOTSI Y. 2D metal carbides and nitrides (MXenes) for energy storage[J]. Nature Reviews Materials, 2, 16098(2017).

[11] LI Y B, SHAO H, LIN Z F et al. A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte[J]. Nature Materials, 19, 894-899(2020).

[12] NECHICHE M, GAUTHIER-BRUNET V, MAUCHAMP V et al. Synthesis and characterization of a new (Ti_1-ε,Cu_ε)₃(Al,Cu)C₂ MAX phase solid solution[J]. Journal of the European Ceramic Society, 37, 459-466(2019).

[13] LI M, LU J, LUO K et al. Element replacement approach by reaction with Lewis acidic molten salts to synthesize nanolaminated MAX phases and MXenes[J]. Journal of the American Chemical Society, 141, 4730-4737(2019).

[14] LI Y, LI M, LU J et al. Single-atom-thick active layers realized in nanolaminated Ti₃(Al_xCu_1-x)C₂ and its artificial enzyme behavior[J]. ACS Nano, 13, 9198-9205(2019).

[15] DING H, LI Y B, LU J et al. Synthesis of MAX phases Nb₂CuC and Ti₂(Al_0.1Cu_0.9)N by A-site replacement reaction in molten salts[J]. Materials Research Letters, 7, 510-516(2019).

[16] LI Y B, LU J, LI M et al. Multielemental single-atom-thick A layers in nanolaminated V₂(Sn,A)C (A=Fe, Co, Ni, Mn) for tailoring magnetic properties[J]. Proceedings of the National Academy of Sciences of the United States of America, 117, 820-825(2020).

[17] ARYAL S, SAKIDJA R, BARSOUM M W et al. A genomic approach to the stability, elastic, and electronic properties of the MAX phases[J]. Physical Status Solidi, 251, 1480-1497(2014).

[18] BOUHEMADOU A, KHENATA R, KHAROUBI M et al. First-principles study of structural and elastic properties of Sc₂AC (A=Al, Ga, In, Tl)[J]. Solid State Communications, 146, 175-180(2008).

[19] COVER M F, WARSCHKOW O, BILEK M M et al. A comprehensive survey of MAX phase elastic properties[J]. Journal of Physics: Condensed Matter, 21, 305403(2009).

[20] CHOWDHURY A, ALI M A, HOSSAIN M M et al. Predicted MAX phase Sc₂InC: dynamical stability, vibrational and optical properties[J]. Physical Status Solidi, 255, 1700235(2018).

[21] ZHA X H, REN J C, FENG L et al. Bipolar magnetic semiconductors among intermediate states during the conversion from Sc₂C(OH)₂ to Sc₂CO₂ MXene[J]. Nanoscale, 10, 8763-8771(2018).

[22] KUCHIDA S, MURANAKA T, KAWASHIMA K et al. Superconductivity in Lu₂SnC[J]. Physica C: Superconductivity, 494, 77-79(2013).

[23] LIU X, FECHLER N, ANTONIETTI M. Salt melt synthesis of ceramics, semiconductors and carbon nanostructures[J]. Chemical Society Reviews, 42, 8237-8265(2013).

[24] WANG B, ZHOU A, HU Q et al. Synthesis and oxidation resistance of V₂AlC powders by molten salt method[J]. International Journal of Applied Ceramic Technology, 14, 873-879(2017).

[25] TIAN W B, WANG P L, KAN Y M et al. Cr₂AlC powders prepared by molten salt method[J]. Journal of Alloys and Compounds, 461, L5-L10(2008).

[26] GALVIN T, HYATT N C, RAINFORTH W M et al. Molten salt synthesis of MAX phases in the Ti-Al-C system[J]. Journal of the European Ceramic Society, 38, 4585-4589(2018).

[27] GUO X, WANG J, YANG S et al. Preparation of Ti₃SiC₂ powders by the molten salt method[J]. Materials Letters, 111, 211-213(2013).

[28] ROY C, BANERJEE P, BHATTACHARYYAh S. Molten salt shielded synthesis (MS3) of Ti₂AlN and V₂AlC MAX phase powders in open air[J]. Journal of the European Ceramic Society, 40, 923-929(2020).

[29] CLARK S J, SEGALL M D, PICKARD C J et al. First principles methods using CASTEP[J]. Zeitschrift für Kristallographie-Crystalline Materials, 220, 567-570(2005).

[30] SEGALL M, LINDAN P J, PROBERT M J et al. First-principles simulation: ideas, illustrations and the CASTEP code[J]. Journal of Physics: Condensed Matter, 14, 2717-2744(2002).

[31] PERDEW J P, BURKE K, ERMZERHOF M. Generalized gradient approximation made simple[J]. Physical Review Letters, 77, 3865-3868(1996).

[32] VANDERBILT D. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism[J]. Physical Review B, 41, 7892-7895(1990).

[33] FRANK W, ELSASSER C, FAHNLE M. Ab initio force-constant method for phonon dispersions in alkali metals[J]. Physical Review Letters, 74, 1791-1794(1995).

[34] PARLINSKI K, LI Z Q, KAWAZOE Y. First-principles determination of the soft mode in cubic ZrO₂[J]. Physical Review Letters, 78, 4063-4066(1997).

[35] XU Q, ZHOU Y, ZHANG H et al. Theoretical prediction, synthesis, and crystal structure determination of new MAX phase compound V₂SnC[J]. Journal of Advanced Ceramics, 29, 481-492(2020).

[36] BORN M, MISRA R D. On the stability of crystal lattices[C]. Mathematical Proceedings of the Cambridge Philosophical Society, 36, 466-478(1940).

[37] KOC H, OZISIK H, DELIGOZ E et al. Mechanical, electronic, and optical properties of Bi₂S₃ and Bi₂Se₃ compounds: first principle investigations[J]. Journal of Molecular Modeling, 20, 2180(2014).

[38] PUGH S F. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals[J]. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science., 45, 823-843(1954).

[39] KANOUN M B, GOUMRI-SAID S, RESHAK A H. Theoretical study of mechanical, electronic, chemical bonding and optical properties of Ti₂SnC, Zr₂SnC, Hf₂SnC and Nb₂SnC[J]. Computational Materials Science, 47, 491-500(2009).