Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 5, 1557(2024)

Study Progress on Reinforcement Technology for 3D Printing Concrete

MAO Yufei1... GUO Zenghui1, CHEN Hui1, ZHANG Jie2, LUO Jianlin1,2,*, LIU Chao2,3 and SHANG Huaishuai2 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(52)

    [1] [1] ZHANG T. Mechanical properties and optimization analysis of reinforced 3D printed concrete[D].Hangzhou: Zhejiang University,2022: 4-23 (in Chinese).

    [2] [2] NODEHI M,AGUAYO F,NODEHI S E,et al. Durability properties of 3D printed concrete (3DPC)[J]. Automation in Construction,2022,142: 104479.

    [3] [3] ZHANG H,DU W F,ZHANG F. Development state of fiber reinforced concrete materials for 3D printing[J]. Journal of Henan University (Natural Science),2020,1(50): 108-117 (in Chinese).

    [4] [4] WANG H Y. Application and perspective of 3D concrete printing technologies in architecture[J]. Jiangxi Building Materials,2022(8): 5-8 (in Chinese).

    [5] [5] LEI B,MA Y,XIONG Y C,et al. Study on preparation method of 3D printing concrete material[J]. Concrete,2018(2): 145-149+153 (in Chinese).

    [6] [6] QI S,LI Q Y,CUI X P,et al. Research status and prospect of 3D printed concrete materials[J]. Concrete,2021(1): 36-39 (in Chinese).

    [7] [7] DU Y L,SUN F F,YUAN G,et al. Current status of materials for three-dimensional printing[J]. Journal of Xuzhou Institute of Technology (Natural Sciences Edition),2014,29(1): 20-24 (in Chinese).

    [8] [8] DE SCHUTTER G,LESAGE K,MECHTCHERINE V,et al. Vision of 3D printing with concrete-technical,economic and environmental potentials[J]. Cement and Concrete Research,2018,112: 25-36.

    [9] [9] LI S P,FENG J X. Optimization design of traditional technology for 3D printing of complex building components[J]. Adhesion,2022,49(9): 111-114 (in Chinese).

    [10] [10] LIU T H,WANG L,LI Z J,et al. A review of incorporating reinforcement method in 3D concrete printing[J]. Industrial Construction,2021,51(6): 9-15 (in Chinese).

    [11] [11] WAN K Y. Mechanical properties and bond performance with steel bars of 3D printing recycled concrete[D]. Guangdong: South China University of Technology,2021: 76-77 (in Chinese).

    [12] [12] GEBHARD L,ESPOSITO L,MENNA C,et al. Inter-laboratory study on the influence of 3D concrete printing set-ups on the bond behaviour of various reinforcements[J]. Cement and Concrete Composites,2022,133: 104660.

    [13] [13] ASPRONE D,MENNA C,BOS F P,et al. Rethinking reinforcement for digital fabrication with concrete[J]. Cement and Concrete Research,2018,112: 111-121.

    [14] [14] HACK N,LAUER W V. Mesh-mould: robotically fabricated spatial meshes as reinforced concrete formwork[J]. Architectural Design,2014,84(3): 44-53.

    [15] [15] DING T,QIN F,XIAO J Z,et al. Experimental study on the bond behaviour between steel bars and 3D printed concrete[J]. Journal of Building Engineering,2022,49: 104105.

    [16] [16] PENG Z X,HUA H. Topology optimization design and 3D printing mold of reinforced concrete beams[C]//Proceedings of the 2022 National Symposium on Teaching and Research of Digital Technology in Architecture of Architecture. 2022: 293-297 (in Chinese).

    [17] [17] MAURYA S,DEY D,PANDA B,et al. Inline reinforcement of steel cable in 3D concrete printing[J]. Materials Today: Proceedings,2023,133: 1-6.

    [18] [18] XIAO J Z,CHEN Z X,DING T,et al. Bending behaviour of steel cable reinforced 3D printed concrete in the direction perpendicular to the interfaces[J]. Cement and Concrete Composites,2022,125: 104313.

    [19] [19] LIU M,WANG L,MA G W,et al. U-type steel wire mesh for the flexural performance enhancement of 3D printed concrete: a novel reinforcing approach[J]. Materials Letters,2023,331: 133429.

    [20] [20] CUI Y H,YU L G,JIA M Y. Study on 3D printing technology of continuous fiber reinforced PLA composite[J]. Fiber Composites,2020,37(3): 95-99 (in Chinese).

    [21] [21] NEMATOLLAHI B,VIJAY P,SANJAYAN J,et al. Effect of polypropylene fibre addition on properties of geopolymers made by 3D printing for digital construction[J]. Materials,2018,11(12): 2352.

    [22] [22] BOS F P,AHMED Z Y,JUTINOV E R,et al. Experimental exploration of metal cable as reinforcement in 3D printed concrete[J]. Materials,2017,10(11): 1314.

    [23] [23] ZHOU Y Y,JIANG D,SHARMA R,et al. Enhancement of 3D printed cementitious composite by short fibers: a review[J]. Construction and Building Materials,2023,362: 129763.

    [24] [24] HOU Z Y. Research on preparation and performance of 3D printing fiber reinforced concrete[D].Nanjing: Southeast University,2020: 70-89 (in Chinese).

    [25] [25] SINGH S B,MUNJAL P,THAMMISHETTI N. Role of water/cement ratio on strength development of cement mortar[J]. Journal of Building Engineering,2015,4: 94-100.

    [26] [26] WANG Q,GAO C. Study on the application of pva fiber in 3D printing concrete[J]. Low Temperature Architecture Technology,2019,41(4): 3-6 (in Chinese).

    [27] [27] HAMBACH M,VOLKMER D. Properties of 3D-printed fiber-reinforced Portland cement paste[J]. Cement and Concrete Composites,2017,79: 62-70.

    [28] [28] CHENG X R,HU Y Y,WANG L,et al. Effects of PP fiber on 3D printability and mechanical properties of concrete[J]. China Concrete and Cement Products,2021(9): 50-55 (in Chinese).

    [29] [29] LAI Y Y,ZHANG Q B,TANG J W. Experimental study on influence of polypropylene fiber on fluidity of cement mortar[J]. Sichuan Cement,2017(3): 12-13 (in Chinese).

    [30] [30] LIU X Y,YANG L R,SONG Y. Research progress of 3D printing building cement-based materials[J]. Journal of North China University of Science and Technology (Natural Science Edition),2018,40(3): 46-50 (in Chinese).

    [31] [31] XIAO B F,LI G,ZHANG G H. Effect of alkali-resistant glass fiber content on performance of 3D printed mortar[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1889-1894+1910 (in Chinese).

    [32] [32] CHANG X D,LI W H,WANG Q. Research progress of 3D printed concrete materials and its performance test[J]. Bulletin of the Chinese Ceramic Society,2019,38(8): 2435-2441 (in Chinese).

    [33] [33] XU W. Research on fabrication and property of 3D printed carbon fiber reinforced green concrete[D].Beijing: University of Science and Technology Beijing,2023: 33-41 (in Chinese).

    [34] [34] YOU Z K. Study on 3D printing properties of fiber reinforced cement-based composites[D].Taiyuan: Taiyuan University of Technology,2022: 29-40 (in Chinese).

    [35] [35] ZHANG C,DENG Z C,WANG Z B,et al. Effects of fibers on printing performance and mechanical properties of 3D printing concrete[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1870-1878+1888 (in Chinese).

    [36] [36] SEO E A,KIM W W,KIM S W,et al. Mechanical properties of 3D printed concrete with coarse aggregates and polypropylene fiber in the air and underwater environment[J]. Construction and Building Materials,2023,378: 131184.

    [37] [37] CHEN X H,LI N,ZHONG J J,et al. Effect of fiber content on mechanical anisotropy of rapid setting 3D printing cement-based materials[J]. Concrete,2023(4): 105-109 (in Chinese).

    [38] [38] LI W H,WANG Q,CHEN X H,et al. Effect of fiber on mechanical properties of 3D printing cement-based materials[J]. Journal of Experimental Mechanics,2021,36(4): 499-506 (in Chinese).

    [39] [39] ZHENG T Y. Research on key technologies of 3D printing of continuous fiber-reinforced composites[D].Harbin: Harbin Institute of Technology,2020: 27-41 (in Chinese).

    [40] [40] ZHU L L,YANG Z,ZHAO Y,et al. 3D printing performance of composite cement-based materials with blast furnace slag and steel slag[J]. Materials Reports,2023,37(12): 111-116 (in Chinese).

    [41] [41] ZHANG D B,FENG P,ZHOU P Z,et al. 3D printed concrete walls reinforced with flexible FRP textile: automatic construction,digital rebuilding,and seismic performance[J]. Engineering Structures,2023,291: 116488.

    [42] [42] TU H D,WEI Z Y,BAHRAMI A,et al. Recent advancements and future trends in 3D concrete printing using waste materials[J]. Developments in the Built Environment,2023,16: 100187.

    [43] [43] LI Y,CHENG G G,LIU Z J. Analysis of strength and deformation properties on PVA-ECC under uniaxial compression[J]. Industrial Construction,2017,47(4): 122-126+158 (in Chinese).

    [44] [44] WANG D M,LI X L,LIU Z. Preparation and working performance of fly ash/phosphorus slag powder modified cement-based 3D printing materials[J]. Bulletin of the Chinese Ceramic Society,2020,39(8): 2372-2378+2392 (in Chinese).

    [45] [45] WEI W,YANG T. Study on preparation and properties of high fluidity 3D printed cement-based materials[J]. China Concrete and Cement Products,2021(2): 8-12 (in Chinese).

    [46] [46] ZHAO Y,LIU W S,WANG H,et al. Effect of limestone powder on properties of cement-based materials for 3D printing[J]. Materials Reports,2020,34(supplement 2): 1217-1220 (in Chinese).

    [47] [47] ZHANG Y,ZHANG Y,LIU G,et al. Fresh properties of a novel 3D printing concrete ink[J]. Construction and Building Materials,2018,174: 263-271.

    [48] [48] LI W H,CHANG X D,WANG Q,et al. Effect of mineral admixture on properties of 3D printing cement-based materials[J]. Bulletin of the Chinese Ceramic Society,2020,39(10): 3101-3107+3114 (in Chinese).

    [49] [49] YANG Q R,ZHAO Z Z,XIAO J Z,et al. Effect of mineral admixtures and chemical admixtures on performance of 3D printing mortar[J]. Journal of Building Materials,2021,24(2): 412-418 (in Chinese).

    [50] [50] RAJEEV P,RAMESH A,NAVARATNAM S,et al. Using fibre recovered from face mask waste to improve printability in 3D concrete printing[J]. Cement and Concrete Composites,2023,139: 105047.

    [51] [51] XIAO X W,TIAN W,MIAO D M. Application of 3D printing technology in building field[J]. Construction Technology,2015,44(10): 79-83 (in Chinese).

    [52] [52] XIA K L,CHEN Y N,LIU C,et al. Research progress on low carbon characters of concrete 3D-printing based construction[J]. Journal of Building Structures,2023: 1-21 (in Chinese).

    Tools

    Get Citation

    Copy Citation Text

    MAO Yufei, GUO Zenghui, CHEN Hui, ZHANG Jie, LUO Jianlin, LIU Chao, SHANG Huaishuai. Study Progress on Reinforcement Technology for 3D Printing Concrete[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(5): 1557

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Special Issue:

    Received: Dec. 7, 2023

    Accepted: --

    Published Online: Aug. 15, 2024

    The Author Email: Jianlin LUO (lawjanelim@qut.edu.cn)

    DOI:

    CSTR:32186.14.

    Topics