[1] [1] Feng Mingshen, Sui Chenghua. Study on two wavelength fiber sensor for measuring surface roughness [J]. Chinese Journal of Quantum Electronics, 2004, 21(6): 873-878. (in Chinese)

[2] [2] Xu Jianqiang, Jiang Chi, Zhang Hui. et al. Study on fiber sensor for measuring surface roughness [J]. Metrology Journal, 2002, 23(4): 280-281. (in Chinese)

[3] [3] Li Yafei. Study on a new reflective optical fiber sensor [J]. Chinese Journal of Scientific Instrument, 2005, 26(10): 1097-1099. (in Chinese)

[4] [4] Xu Xiaomei. Inner surface roughness measurement of holes based on reflective intensity modulation fiber optic Sensor [D]. Harbin: Harbin Institute of Technology, 2010. (in Chinese)

[5] [5] Wang Huaping, Zhou Zhi, Wang Qian, et al. Strain transfer errors of optical fiber sensors Embedded in asphalt pavement [J]. Optics and Precision Engineering, 2015, 23(6): 1499-1507. (in Chinese)

[6] [6] Zhang Ping, Zhang Xiaodong, Dong Xiaoni. Output characteristics of sensor with two-circle coaxial optical fiber in lubricating oil medium [J]. Chinese Optics, 2015, 8(3):439-446. (in Chinese)

[7] [7] Liu Ying, Lang Zhiguo, Tang Wenyan. Development of measurement system about light-section microscope for surface roughness [J]. Infrared and Laser Engineering, 2012, 41(3): 775-779. (in Chinese)

[8] [8] Guo Ruipeng. Theoretical and experimental investigation of in-process measurement of surface characteristic parameter based on laser scattering[D]. Shanghai: Shanghai JiaoTong University, 2011. (in Chinese)

[9] [9] Li Lijuan. Research on applying laser scattering characteristic of object to measure surface microcosmic profile precision of steel plate [D]. Changchun: Changchun University of Science and Technology, 2005. (in Chinese)

[10] [10] Shi Zhenhua, Lin Guanyu, Wang Shurong, et al. Numerical analysis of small particle measurement based on the theory of laser Scattering [J]. Infrared and Laser Engineering, 2015, 44(7): 2189-2194. (in Chinese)

[11] [11] Gale M F Ruiz, Hogert E N. Apparent and real roughness [J]. Optics and Lasers in Engineering, 2007, 45(8): 947-952.

[12] [12] Lorenzo Basano, Stefano Leporatti, Pasquale Ottonello, et al. Measurements of surface roughness: use of a CCD camera to correlate doubly scattered speckle patterns [J]. Applied Optics, 1995, 34(31): 7286-7290.

[13] [13] Peter Lehmann. Surface-roughness measurement based on the intensity correlation function of scattered light under speckle-pattern illumination [J]. Applied Optics, 1999, 38 (7): 1144-1152.

[14] [14] Wang Yonghong, Li Junrui, Sun Jianfei, et al. Frequency domain filtering for phase fringe patterns of digital speckle pattern interferometry [J]. Chinese Optics, 2014, 7(3): 389-395. (in Chinese)

[15] [15] Kong Ping, Yang Hui, Lin Weimin, et al. Measurement of particle sizes by contrast of dynamic laser speckle [J]. Optics and Precision Engineering, 2014, 22(10): 2633-2638. (in Chinese)

[16] [16] Fu Huaiyang, Zhou Sizhong, Jiang Kai, et al. Effects of mirror surface roughness on encircled energy for far ultraviolet telescopes [J]. Infrared and Laser Engineering, 2014, 43(8): 2562-2567. (in Chinese)

[17] [17] Heng Zhao, Hua Dengxin. Modifications to Beckmann-Kirchhoff model for random rough surfaces with non-paraxial angles [J]. Journal of Xi’ an University of Technology, 2013, 29(3): 285-289.

[18] [18] Stover J C, Serati S A, Cillespie C H. Calculation of surface statistics from light scatter [J]. Optical Engineering, 1984, 23(4): 406-412.

[19] [19] Xiao Jing, Zhang Bin. Influence of the optical components contamination on the signal to noise ratio in infrared optical systems [J]. Infrared and Laser Engineering, 2012, 41(4): 1010-1016. (in Chinese)

[20] [20] Harvey J E, Krywonos A, Bogunovic D. Nonparaxial scalar treatment of sinusoidal phase gratings [J]. Journal of OSA-A, 2006, 23(4): 858-865.

[21] [21] Sven S, Angela D, Luisa C, et al. Modeling of light scattering in different regimes of surface roughness [J]. Optics Express, 2011, 19(10): 9820-9835.