[2] [2] OKUMURA H. Present status and future prospect of widegap semiconductor high-power devices[J]. Jpn J Appl Phys, 2006, 45(10A): 7565.

[3] [3] JIA H , LI J , RUI N, et al. Fabrication of β-Si3N4 for high thermal conductivity under ultra-high pressure[J]. Ceram Int, 2018, 44(18): 23288-23292.

[5] [5] HUANG D, LIU Z, HARRIS J, et al. High thermal conductive AlN substrate for heat dissipation in high-power LEDs[J]. Ceram Int, 2019, 45(1): 1412-1415.

[6] [6] ZUO F, MENG F, LIN D T, et al. Effect of current pattern and conductive phase on sintering behavior of Si3N4-based ceramic composite[J]. Ceram Int, 2018, 44(8): 9561-9567.

[7] [7] HAGGERTY J S, LIGHTFOOT A. Opportunities for enhancing the thermal conductivity of SiC and Si3N4 ceramics through improved processing[M]. John Wiley & Sons, Inc. 2008.

[8] [8] ZHOU Y, HYUGA H, DAI K, et al. A tough silicon nitride ceramic with high thermal conductivity[J]. Adv Mater, 2011, 23(39): 4563-4567.

[10] [10] ZHAO Y, ZHANG Y, GONG H, et al. Gas pressure sintering of BN/Si3N4 wave-transparent material with Y2O3-MgO nanopowders addition[J]. Ceram Int, 2014, 40(8): 13537-13541.

[11] [11] BRESSIANI J C, IZHEVSKYI V, BRESSIANS A. Development of the microstructure of the silicon nitride based ceramics[J]. Mater Res, 1999, 2(3): 165-172.

[12] [12] WANG C M, PAN X, et al. Silicon nitride crystal structure and observations of lattice defects[J]. J Mater Sci, 1996, 31(20): 5281-5298.

[13] [13] HAYASHI H, HIRAO K, TORIYAMA M, et al. MgSiN2 addition as a means of increasing the thermal conductivity of β-silicon nitride[J]. J Am Ceram Soc, 2001, 84(12): 3060-3062.

[14] [14] DING H, ZHAO Z, QI T, et al. High α-β phase transition and properties of YbF3-added porous Si3N4 ceramics obtained by low temperature pressureless sintering[J]. Int J Refract Met & Hard Mater, 2019, 78: 131-137.

[15] [15] LEE H M, LEE E B, KIM D L, et al. Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics[J]. Ceram Int, 2016, 42(15): 17466-17471.

[16] [16] YANG C, FENG Y, JIE M, et al. Comparative study of fluoride and non-fluoride additives in high thermal conductive silicon nitride ceramics fabricated by spark plasma sintering and post-sintering heat treatment[J]. Ceram Int, 2018, 44(18): 23202-23207.

[18] [18] TANAKA S, ITATANI K, HINTZEN H T, et al. Effect of silicon nitride addition on the thermal and mechanical properties of magnesium silicon nitride ceramics [J]. J Eur Ceram Soc, 2004, 24: 2163-2168.

[19] [19] FANG C M, WIJS G A, GROOT R A, et al. O/N ordering in Y2Si3O3N4 with the melilite-type structure from first-principles calculations [J]. Chem Mater, 2000, 12: 1071-1075.

[20] [20] PYZIK A J, CARROL D F. Technology of self-reinforced silicon nitride[J]. Annu Rev Mater Res, 1994, 24(1): 189-214.

[21] [21] LIANG Z H, LI J, GUI L C, et al. The role of MgSiN2 during the sintering process of silicon nitride ceramic[J]. Ceram Int, 2013, 39(4): 3817-3822.

[22] [22] SUN L C, LIU B, WANG J M, et al. Theoretical Study on the relationship between crystal chemistry and properties of quaternary Y—Si—O—N oxynitrides[J]. J Am Ceram Soc, 2016, 99(7): 2442-2450.