Bulletin of the Chinese Ceramic Society, Volume. 42, Issue 7, 2281(2023)
Effect of Interlayer Water Film on Interfacial Characteristics of 3D Printed Concrete
[1] [1] HOU S D, DUAN Z H, XIAO J Z, et al. A review of 3D printed concrete: performance requirements, testing measurements and mix design[J]. Construction and Building Materials, 2021, 273: 121745.
[2] [2] MOELICH G M, KRUGER J, COMBRINCK R. Plastic shrinkage cracking in 3D printed concrete[J]. Composites Part B: Engineering, 2020, 200: 108313.
[3] [3] CHEN Y N, JIA L T, LIU C, et al. Mechanical anisotropy evolution of 3D-printed alkali-activated materials with different GGBFS/FA combinations[J]. Journal of Building Engineering, 2022, 50: 104126.
[4] [4] WANG L, MA G W, LIU T H, et al. Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails[J]. Cement and Concrete Research, 2021, 148: 106535.
[8] [8] SUN X Y, ZHOU J W, WANG Q, et al. PVA fibre reinforced high-strength cementitious composite for 3D printing: mechanical properties and durability[J]. Additive Manufacturing, 2022, 49: 102500.
[9] [9] LIU H, LIU C, WU Y, et al. 3D printing concrete with recycled coarse aggregates: the influence of pore structure on interlayer adhesion[J]. Cement and Concrete Composites, 2022, 134: 104742.
[10] [10] ZHOU W, ZHANG Y M, MA L, et al. Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC)[J]. Cement and Concrete Composites, 2022, 130: 104562.
[11] [11] KEITA E, BESSAIES-BEY H, ZUO W Q, et al. Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin[J]. Cement and Concrete Research, 2019, 123: 105787.
[12] [12] MOELICH G M, KRUGER J, COMBRINCK R. Modelling the interlayer bond strength of 3D printed concrete with surface moisture[J]. Cement and Concrete Research, 2021, 150: 106559.
[13] [13] WOLFS R J M, BOS F P, SALET T A M. Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion[J]. Cement and Concrete Research, 2019, 119: 132-140.
[14] [14] KAYONDO M, COMBRINCK R, BOSHOFF W P. State-of-the-art review on plastic cracking of concrete[J]. Construction and Building Materials, 2019, 225: 886-899.
[15] [15] NIU X J, LI Q B, LIU W J, et al. Effects of ambient temperature, relative humidity and wind speed on interlayer properties of dam concrete[J]. Construction and Building Materials, 2020, 260: 119791.
[16] [16] YIM H J, KIM J H, KWAK H G, et al. Evaluation of internal bleeding in concrete using a self-weight bleeding test[J]. Cement and Concrete Research, 2013, 53: 18-24.
Get Citation
Copy Citation Text
RUI Aoyu, WANG Li, MA Guowei. Effect of Interlayer Water Film on Interfacial Characteristics of 3D Printed Concrete[J]. Bulletin of the Chinese Ceramic Society, 2023, 42(7): 2281
Category:
Received: Apr. 6, 2023
Accepted: --
Published Online: Nov. 1, 2023
The Author Email: Aoyu RUI (ray19990520@163.com)
CSTR:32186.14.