[1] Dong X C, Du C L, Wang C T et al. Mask-shift filtering for forming microstructures with irregular profile[J]. Appl Phys Lett, 89, 261105(2006).

[2] Dong X C, Du C L, Li S H et al. Control approach for form accuracy of microlenses with continuous relief[J]. Opt Express, 13, 1353-1360(2005).

[3] Zhang W G, Zhu G D, Zhu X Q et al. Ultra-precision replication technology for fabricating spiral-structure metamaterial[J]. Front Phys, 8, 267(2020).

[4] Zhang W G, Xia L P, Gao M Y et al. Laser beam homogenization with randomly distributed freeform cylindrical microlens[J]. Opt Eng, 59, 065103(2020).

[5] Zhang S Y, Zhao L X, He Y. Lithography alignment method based on image rotation matching[J]. J Phys Conf Ser, 1939, 012039(2021).

[6] Yang Q H, Chen D P, Ye T C et al. Development of mask for scattering with angular limitation projection electron-beam lithography[J]. Opto-Electron Eng, 31, 13-16(2004).

[7] Wang Y H, He J Y, Wang C T et al. Method investigation of direct-writing nanolithography based on enhanced local surface Plasmon resonance[J]. Opto-Electron Eng, 43, 71-76(2016).

[8] Ekberg M, Nikolajeff F, Larsson M et al. Proximity-compensated blazed transmission grating manufacture with direct-writing, electron-beam lithography[J]. Appl Opt, 33, 103-107(1994).

[9] Lee L P, Berger S A, Liepmann D et al. High aspect ratio polymer microstructures and cantilevers for bioMEMS using low energy ion beam and photolithography[J]. Sens Actuators A Phys, 71, 144-149(1998).

[10] Gonin Y, Munnik F, Benninger F et al. Creating sub-surface channels in PMMA with ion beam lithography in only one step[J]. Appl Surf Sci, 217, 289-293(2003).

[11] Yang S H, Ding C L, Zhu D Z et al. High-speed two-photon lithography based on femtosecond laser[J]. Opto-Electron Eng, 50, 220133(2023).

[12] Wang H Q, Wen J S, Yang Z Y et al. High-speed parallel two-photon laser direct writing lithography system[J]. Chin J Lasers, 49, 2202009(2022).

[13] Lee C H, Yoshida H, Miura Y et al. Local liquid crystal alignment on patterned micrograting structures photofabricated by two photon excitation direct laser writing[J]. Appl Phys Lett, 93, 173509(2008).

[14] Liu X Q, Chen Q D, Guan K M et al. Dry-etching-assisted femtosecond laser machining[J]. Laser Photonics Rev, 11, 1600115(2017).

[15] Liu X Q, Yu L, Yang S N et al. Optical nanofabrication of concave microlens arrays[J]. Laser Photonics Rev, 13, 1800272(2019).

[16] Liu J H, Liu J B, Deng Q Y et al. Intensity modulation based optical proximity optimization for the maskless lithography[J]. Opt Express, 28, 548-557(2020).

[17] Artyukov I, Balakireva L, Bijkerk F et al. Projection x-ray lithography implemented using point sources[J]. Sov J Quantum Electron, 22, 99-110(1992).

[18] Du J, Liu J B, Quan H Y et al. Displacement measurement analysis in distortion detection of lithography projection objective[J]. Opto-Electron Eng, 50, 220226(2023).

[19] Li B, Che Y, Xu H et al. Lithography technical science knowledge map and multidimensional theme analysis[J]. Laser Optoelectron Prog, 60, 2300004(2023).

[20] Vlad A, Huynen I, Melinte S. Wavelength-scale lens microscopy via thermal reshaping of colloidal particles[J]. Nanotechnology, 23, 285708(2012).

[21] Veldkamp W B. Binary optics: a new approach to optical design and fabrication[J]. Opt News, 14, 29-30(1988).

[22] Chang C Y, Yang S Y, Huang L S et al. Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold[J]. Infrared Phys Technol, 48, 163-173(2006).

[23] Dong X C, Du C L, Pan L et al. A new method for control relief depth of micro-lens array[J]. Opto-Electron Eng, 30, 1-3(2003).

[24] Zhang W G, Dong X C, Du C L. Zooming method for microlens array imaging photolithography[J]. Opto-Electron Eng, 37, 39-43(2010).

[25] Du C L, Dong X C, Deng Q L et al. Micro-optical structures formed by a mask moving method[J]. Optoelectron Lett, 3, 95-98(2007).

[26] Cao A X, Wang J Z, Pang H et al. Design and fabrication of a multifocal bionic compound eye for imaging[J]. Bioinspir Biomim, 13, 026012(2018).

[27] Im B, Prasetyo F D, Yudistira H T et al. Drop-on-demand electrohydrodynamic jet printing of microlens array on flexible substrates[J]. ACS Appl Polym Mater, 5, 2264-2271(2023).

[28] Zhao R, Peng C, Zhang K et al. Design and simulation of bionic compound eye with electrowetting liquid lens[J]. Opto-Electron Eng, 48, 49-56(2021).

[29] Shi L F, Du C L, Dong X C et al. Effective formation method for an aspherical microlens array based on an aperiodic moving mask during exposure[J]. Appl Opt, 46, 8346-8350(2007).

[30] Shi L F, Cao A X, Liu Y et al. Design and experiments of artificial compound eye with large view field[J]. Opto-Electron Eng, 40, 27-33(2013).