[1] [1] WU X X, YANG H B, ZHANG J X, et al.. Strain of a lightweight elliptical mirror with steel strip support ［J］. Acta Photonica Sinica, 2008, 37(10): 2080-2083.(in Chinese)

[2] [2] WANG F G, YANG H B, ZHAO W X, et al.. Lightweight design and analysis of a 1.2 m SiC primary mirror ［J］. Opt. Precision Eng., 2009, 17(1): 85-91.(in Chinese)

[3] [3] IWONA A P, ISACC G. Developing SiC for optical system application ［J］. Novel Optical Systems Design and Optimization, 2004, 5524: 14-20.

[4] [4] WU X X, LI J F, SONG SH M, et al.. Active support system for 4 m SiC lightweight primary mirror ［J］. Opt. Precision Eng., 2014, 22(9): 2452-2457.(in Chinese)

[5] [5] WILSON R N. Reflecting Telescope Optics Ⅱ, Manufacture, Testing, Alignment, Modern Techniques ［M］. Berlin: Springer Press, 1999: 264-268.

[6] [6] DONG B, FU Y G, LIU ZH Y.Large aperture off-axis collimator: primary mirror structure and optical inspection ［J］. Journal of Applied Optics, 2011, 32(4): 714-717.(in Chinese)

[7] [7] GAO M H, LI L F, XU J L, et al.. Design of a new kind of multi-waveband large aperture parallel light pipe ［J］. Infrared and Laser Engineering, 2009, 38(4): 698-701.(in Chinese)

[8] [8] YE L, WANG ZH X.Supporting and adjusting for collimator primary mirror with large-aperture and long-focal length ［J］. Opt. Precision Eng., 2000, 8(5): 462-465.(in Chinese)

[9] [9] ZHAO T J, QIAO Y F, SUN N, et al.. Surface deformation of theodolite primary mirror under the support system ［J］. Chinese Optics, 2017, 10(4): 477-483. (in Chinese)

[10] [10] PAUL R Y. Opto-mechanical System Design ［M］. (3rd edition), Boca Raton: CRC Press, 2006: 471-474.

[11] [11] CHENG J Q. Principles of Astronomical Telescope Design ［M］. Beijing: China Science & Technology Press, 2003.(in Chinese)

[12] [12] YANG L W, LI ZH L, XUE D L, et al.. Extracting zero-gravity surface figure of mirror by orientation reversal ［J］. Chinese Optics, 2016,9(5): 606-612. (in Chinese)