[1] [1] DONG W C, GUO R X. Research progress of air injection drag reduction ［J］. Academy of Naval Engineering, 1998,2(5):73-78. (in Chinese)

[2] [2] DUNISCHEV Y N, EVSEEV A R, SOBOLEV V S, et al.. Study of gas-saturated turbulent streams using a laser Doppler velocity meter ［J］. Journal of Applied Mechanics and Technical Physics, 1975, 16(1):114-119.

[3] [3] MADAVAN N K, DEUTSCH S, MERKLE C L. Reduction of turbulent skin friction by micro bubbles ［J］. The Physics of Fluids,1984, 27(2):356-363.

[4] [4] DONG W C, GUO R X, CHEN X L, et al.. Experimental study on resistance reduction of planning craft by air injection ［J］. Ship Building of China, 2002, 43(4):13-18. (in Chinese)

[5] [5] CHEN X P,LI Y,ZHU X G,et al.. Flexible MEMS anti-dray skin and its fabrication:China,ZL2200910079713.0 ［P］.2009-7-22.

[6] [6] STEPHANI K A, GOLDSTEIN D B. An examination of trapped bubbles for viscous drag reduction on submerged surfaces ［J］. Journal of Fluids Engineering, Transactions of the ASME, 2010, 132(4): 041303-1-9.

[7] [7] BARTH P W, BERNARD S L, ANGELL J B. Flexible circuit and sensor arrays fabricated by monolithic silicon technology ［J］. IEEE Trans. Electron Devices, 1985, 32(7):1202-1205.

[8] [8] JIANG F K, LEE G B, TAI Y C, et al.. A flexible micro machine-based shear-stress sensor array and its application to separation-point detection ［J］. Sensors and Actuators: A-Physical, 2003, 79(3):194-203.

[9] [9] RUI Y F, WANG Y J, LIU J Q, et al.. Fabrication of parylene-based flexible microelectrode arrays ［J］. Nanotechnology and Precision Engineering, 2011,9(5):422-426. (in Chinese)

[10] [10] KIM E, XIA Y N, WHITESHIDES G M. Polymer microstructures formed by moulding in capillaries ［J］. Nature, 1995, 118: 5722-5731.

[11] [11] KIM E, XIA Y N, WHITESHIDES G M. Micromolding in capillaries: applications in materials science ［J］. Journal of the American Chemical Society, 1996, 118 (24): 5722-5731.

[12] [12] XIA Y N, KIM E, WHITESIDES G M. Micromolding of polymers in capillaries: applications in microfabrication ［J］. Chemistry of Materials, 1996, 8(7): 1558-1567.

[13] [13] BALAKRISNAN B, PATIL S, SMELA E. Patterning PDMS using a combination of wet and dry etching ［J］. Journal of Micromechanics and Microengineering,2009, 19:047002-1-7.

[14] [14] GARRA J, LONG T, CURRIE J, et al.. Dry etching of polydimethylsiloxane for microfluidic systems ［J］. American Vacuum Society, 2002, 20(3): 975-982.

[15] [15] BOGDANOV A L, PEREDKOV S S. Use of SU-8 photoresist for very high aspect ratio x-ray lithography ［J］. Journal of Micromechanics and Microengineering, 2007,17(6):81-95.

[16] [16] LORENZ H, DESPONT M, FAHRNI N, et al.. High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS ［J］. Sensors and Actuators,1998,64(1):33-39.

[17] [17] HUANG X L, XIONG Y, CHEN G Y, et al.. Fabrication of micro spiral acceleration switch using UV-LIGA technology ［J］. Opt. Precision Eng., 2010, 18(5):1152-1158. (in Chinese)

[18] [18] CHU J K, CHEN ZH P, ZHANG R. Microfabrication of SU-8 cantilever micro-force sensor integrated by copper piezoresistance ［J］. Opt. Precision Eng., 2011,19(12):2935-2940. (in Chinese)