[1] [1] Wang Xiangming, Liu Wenting. Design and Application of Aircraft Structure of Titanium Alloy [M]. Beijing: National Defence Industry Press, 2010: 14. (in Chinese)

[2] [2] Qin Lanyun, Wang Wei, Yang Guang, et al. Experimental study on ultrasonic-assisted laser metal deposition of titanium alloy[J]. Chinese Journal of Lasers, 2013, 40(1): 0103001. (in Chinese)

[3] [3] Lu Bingheng, Li Dichen. Development of the additive manufacturing (3D printing) technology[J]. Mechanical Building and Automation, 2013, 42(4): 1-4. (in Chinese)

[4] [4] Qian Yuanhong, Tan Hua, Li Jing, et al. Microstructure characterization of laser solid forming Ti-6Al-4V alloy by high power[J]. Rare Metal Materials and Engineering, 2014, 43(9): 2162-2166. (in Chinese)

[5] [5] Lin Xin, Xue Lei, Chen Jing, et al. Laser forming repair of titanium alloy parts[J]. Aeronautical Manufacturing Technology, 2010, 35(8): 55-58. (in Chinese)

[6] [6] Gao Xuesong, Huang Yinhui, Tian Zongjun, et al. Erosive wear resistance behavior of laser cladding Al2O3+13% TiO2 coating prepared by plasma spraying on titanium alloy surface[J]. Chinese Journal of Lasers, 2010, 37(3): 858-862. (in Chinese)

[7] [7] Feng Shurong, Zhang Shuquan, Wang Huaming, et al. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy[J]． Chinese Journal of Lasers, 2012, 39(2): 0203002. (in Chinese)

[8] [8] Li Huaixue, Gong Shuili, Sun Fan, et al. Development and application of laser additive manufacturing for metal component[J]. Aeronautical Manufacturing Technology, 2012, 37(2): 25-31. (in Chinese)

[9] [9] Wang Huaming, Zhang Shuquan, Wang Xiangming, et al. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209. (in Chinese)

[10] [10] Wang Huaming. Materials fundamental lssues of laser additive mantufacturing for high-performance large metallic components [J]. Acta Aeronautica et Astronautica, 2014, 35(10): 2690-2698. (in Chinese)

[11] [11] Zhang Wei, Yao Jianhua, Dong Chenhui, et al. Repairing and strengthening of eroded turbine blades by laser technology[J]. Journal of Power Engineering, 2008, 28(6): 967-971. (in Chinese)

[12] [12] Dong Shiyun, Zhang Xiaodong, Xu Binshi, et al. Laser cladding remanufacturing of 45 steel cam shaft worn cam[J]. Journal of Academy of Armored Force Engineering,2011, 25(2): 85-88. (in Chinese)

[13] [13] Xu Songhua, Xiao Yang, Li Jian, et al. Organization property researches of the laser repair technology in the helicopter engine turbine oriented implement[J]. Acta Optica Sinica,2010, 30(8): 2311-2316. (in Chinese)

[15] [15] Suárez A, Amado J M, Tobar M C, et al. Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation[J]. Surface and Coatings Technology, 2010, 204: 1983-1988.

[16] [16] Arisa Farahmand, Radovan Kovacevic. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics & Laser Technology, 2014, 63:154-168.

[18] [18] J Michael Wilson, Cecil Piya, Yung C Shin, et al. Remanufacturing of turbine blades by laser direct deposition with its energy and environment impact analysis[J]. Journal of Cleaner Production, 2014, 80: 170-178.

[19] [19] Wang Xiaoyan, Chen Jing, Lin Xin, et al. Microstructure of laser forming repair 7050 aluminum alloy with AISi12 powder [J]. Chinese Journal of Lasers, 2009, 36(6): 1585-1590. (in Chinese)

[20] [20] Gong Xinyong, Liu Mingkun, Li Yan, et al. Research on repair of TC11 titanium alloy components by laser melting deposition process[J]. Chinese Journal of Lasers, 2012, 39(2): 0203005. (in Chinese)

[21] [21] Ren Huifang, Ren Jialong, Wang Qingxian. Simulation analysis on the laser cladding repair material selection of disel engine crankshaft crack[J]. Journal of Xuzhou Institute of Technology, 2013, 28(3): 69-72. (in Chinese)

[22] [22] Nickel A H, Barnett D M, Prinz F B. Thermal stress and deposition patterns in layered manufacturing[J]. Materials Science and Engieering A, 2001, 317: 59-64.

[23] [23] He Bin, Li Dichen, Zhang Anfeng, et al. Influence of scanning pattern on the edge collapse of solid parts in laser metal direct forming[J]. Optics & Laser Technology, 2013, 48: 171-177.