[1] [1] Y. Liu, H. Li, Y. Wang, Y. Men, and Q. Xu, “Damage detection of tunnel based on the high-density cross-sectional curvature obtained using strain data from BOTDA sensors,” Mechanical Systems and Signal Processing, 2021, 158: 107728.

[2] [2] H. Pei, J. Yin, and Z. Wang, “Monitoring and analysis of cast-in-place concrete bored piles adjacent to deep excavation by using BOTDA sensing technology,” Journal of Modern Optics, 2019, 66(7): 703–709.

[3] [3] J. Xu, Y. Dong, Z. Zhang, S. Li, S. He, and H. Li, “Full scale strain monitoring of a suspension bridge using high performance distributed fiber optic sensors,” Measurement Science and Technology, 2016, 27(12): 124017.

[4] [4] Z. Zhang, P. Guan, J. Xu, B. Wang, H. Li, and Y. Dong, “Horizontal loading performance of offshore wind turbine pile foundation based on DPP-BOTDA,” Applied Sciences, 2020, 10(2): 492.

[5] [5] A. H. Hartog, An Introduction to Distributed Optical Fibre Sensors. Boca Raton: CRC Press, 2017.

[6] [6] T. Horiguchi and M. Tateda, “BOTDAnondestructive measurement of single-mode optical fiber attenuation characteristics using Brillouin interaction: theory,” Journal of Lightwave Technology, 1989, 7(8): 1170–1176.

[7] [7] M. A. Soto, M. Taki, G. Bolognini, and F. D. Pasquale, “Optimization of a DPP-BOTDA sensor with 25 cm spatial resolution over 60 km standard single-mode fiber using Simplex codes and optical pre-amplification,” Optics Express, 2012, 20(7): 6860–6869.

[8] [8] H. Su, Z. Wen, and P. Li, “Experimental study on PPP-BOTDA-based monitoring approach of concrete structure crack,” Optical Fiber Technology, 2021, 65: 102590.

[9] [9] F. Gutiérrez, “Sinkhole hazards,” in Oxford Research Encyclopedia of Natural Hazard Science, Oxford: Oxford University Press, 2016: 1–92.

[10] [10] F. Gutiérrez, A. Benito-Calvo, D. Carbonel, G. Desir, J. Sevil, J. Guerrero, et al., “Review on sinkhole monitoring and performance of remediation measures by high-precision leveling and terrestrial laser scanner in the salt karst of the Ebro valley, Spain,” Engineering Geology, 2019, 248: 283–308.

[11] [11] D. Culverhouse, F. Farahi, C. N. Pannell, and D. A. Jackson, “Stimulated Brillouin scattering: a means to realise tunable microwave generator or distributed temperature sensor,” Electronics Letters, 1989, 25(14): 915–916.

[12] [12] T. Horiguchi, T. Kurashima, and M. Tateda, “Tensile strain dependence of Brillouin frequency shift in silica optical fibers,” IEEE Photonics Technology Letters, 1989, 1(5): 107–108.

[13] [13] H. Ohno, H. Naruse, M. Kihara, and A. Shimada, “Industrial applications of the BOTDR optical fiber strain sensor,” Optical Fiber Technology, 2001, 7(1): 45–64.

[14] [14] Z. Zhou, J. He, K. Yan, and J. Ou, “Fiber-reinforced polymer-packaged optical fiber sensors based on Brillouin optical time-domain analysis,” Optical Engineering, 2008, 47(1): 014401.

[15] [15] C. K. Y. Leung, K. T. Wan, D. Inaudi, X. Bao, W. Habel, Z. Zhou, et al., “Review: optical fiber sensors for civil engineering applications,” Materials and Structures, 2013, 48(4): 871–906.

[16] [16] H. Chen, J. He, Y. Xue, and S. Zhang, “Experimental study on sinkhole collapse monitoring based on distributed Brillouin optical fiber sensor,” Optik, 2020, 216: 164825.

[17] [17] Y. Dong, X. Bao, and L. Chen, “High-axialresolution distributed lateral displacement measurement based on differential pulse-width pair BOTDA,” in 21st International Conference on Optical Fiber Sensors, Ottawa, 2011, pp. 1482–1485.

[18] [18] H. Wu, H. H. Zhu, C. C. Zhang, G. Y. Zhou, B. Zhu, W. Zhang, et al., “Strain integration-based soil shear displacement measurement using high-resolution strain sensing technology,” Measurement, 2020, 166: 108210.

[19] [19] H. Sang, H. H. Zhu, C. C. Zhang, G. Y. Zhou, B. Zhu, W. Zhang, et al., “Strain distribution based geometric models for characterizing the deformation of a sliding zone,” Engineering Geology, 2019, 263: 105300.

[20] [20] D. Hauswirth, M. Iten, and A. M. Puzrin, “Detection of ground movements using soil-embedded distributed fiber optic sensors,” in Geotechnical and Geophysical Site Characterization : Proceedings of the 4th International Conference on Site Characterization ISC-4, Basel, Switzerland, 2013, pp. 579–586.

[21] [21] S. P. Liu, B. Shi, K. Gu, C. C. Zhang, J. L. Yang, S. Zhang, et al., “Land subsidence monitoring in sinking coastal areas using distributed fiber optic sensing: a case study,” Natural Hazards, 2020, 103(3): 3043–3061.

[22] [22] K. Gu, B. Shi, C. Liu, H. Jiang, T. Li, and J. Wu, “Investigation of land subsidence with the combination of distributed fiber optic sensing techniques and microstructure analysis of soils,” Engineering Geology, 2018, 240: 34–47.

[23] [23] Y. Peled, A. Motil, I. Kressel, and M. Tur, “Monitoring the propagation of mechanical waves using an optical fiber distributed and dynamic strain sensor based on BOTDA,” Optics Express, 2013, 21(9): 10697–10705.

[24] [24] J. Liu, Y. Wang, Y. Lu, J. Wei, and D. P. Kanungo, “Application of distributed optical fiber sensing technique in monitoring the ground deformation,” Journal of Sensors, 2017, 2017: e6310197.

[25] [25] A. Benito-Calvo, F. Gutiérrez, A. MartInez-Fernández, D. Carbonel, T. Karampaglidis, G Desir, et al., “4D monitoring of active sinkholes with a terrestrial laser scanner (TLS): a case study in the evaporite karst of the Ebro valley, NE Spain,” Remote Sensing, 2018, 10(4): 571.

[26] [26] A. DomInguez-López, A. López-Gil, S. MartIn-López, and M. González-Herráez, “Signal-to-noise ratio improvement in BOTDA using balanced detection,” IEEE Photonics Technology Letters, 2014, 26(4): 338–341.

[27] [27] J. De Waele and F. Gutiérrez, Karst Hydrogeology, Geomorphology and Caves, Hoboken: Wiley-Blackwell, 2022.

[28] [28] J. Sevil, F. Gutiérrez, C. Carnicer, D. Carbonel, G. Desir, á. GarcIa-Arnay, et al., “Characterizing and monitoring a high-risk sinkhole in an urban area underlain by salt through non-invasive methods: detailed mapping, high-precision leveling and GPR,” Engineering Geology, 2020, 272: 105641.