[6] [6] KHOSHNEVIS B, RUSSELL R, KWON H, et al. Crafting large prototypes[J]. IEEE Robot Autom Mag, 2001, 8(3): 33-42.

[7] [7] DING T, XIAO J, ZOU S, et al. Anisotropic behavior in bending of 3D printed concrete reinforced with fibers[J]. Compos Struct, 2020, 254: 112808.

[8] [8] HAMBACH M, VOLKMER D. Properties of 3D-printed fiber-reinforced Portland cement paste[J]. Cem and Concr Compos, 2017, 79: 62-70.

[9] [9] NEMATOLLAHI B, VIJAY P, SANJAYAN J, et al. Effect of polypropylene fibre addition on properties of geopolymers made by 3D printing for digital construction[J]. Materials, 2018, 11(12): 2532.

[10] [10] BOS F, AHMED Z, JUTINOV E, et al. Experimental exploration of metal cable as reinforcement in 3D printed concrete[J]. Materials, 2017, 11(10): 1314.

[11] [11] LIM J H, PANDA B, PHAM Q-C. Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement[J]. Constr Build Mater, 2018, 178: 32-41.

[12] [12] PERROT A, JACQUET Y, RANGEARD D, et al. Nailing of layers: A promising way to reinforce concrete 3D printing structures[J]. Materials, 2020, 13(7): 1518.

[13] [13] WANG L, MA G, LIU T, et al. Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails[J]. Cem Concr Res, 2021, 148: 106535.

[14] [14] BESTER F, KRUGER J, ZIJL G V. Rivet reinforcement for concrete printing[J]. Addit Manuf, 2023, 67: 103490.

[15] [15] ROUSSEL N, LOWKE D. Digital Fabrication with Cement-Based Materials: State-of-the-Art Report of the RILEM TC 276-DFC[M]. Switzerland: Springer, 2022: 159-160.

[19] [19] YANG R, ZHU Y, LAN Y, et al. Differences in micro grain/fiber distributions between matrix and interlayer of cementitious filaments affected by extrusion molding[J]. Addit Manuf, 2022, 60: 103236.

[20] [20] MECHTCHERINE V, BUSWELL R, KLOFT H, et al. Integrating reinforcement in digital fabrication with concrete: A review and classification framework[J]. Cem Concr Compos, 2021, 119: 103964.

[21] [21] DENG J. Control problems of grey systems[J]. Syst Control Lett, 1982, 1: 288-294.