Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 5, 1651(2024)
Anisotropic of 3D Printed Cement-Based Materials Reinforced with Metakaolin and Limestone Powder
[1] [1] ZHANG D H. Investigation on anisotropy of fiber reinforced polymer composites in 3D printing[D].Nanjing: Nanjing University of Aeronautics and Astronautics,2019 (in Chinese).
[2] [2] DE SCHUTTER G,LESAGE K,MECHTCHERINE V,et al. Vision of 3D printing with concrete: technical,economic and environmental potentials[J]. Cement and Concrete Research,2018,112: 25-36.
[3] [3] ZHANG J C,WANG J L,DONG S F,et al. A review of the current progress and application of 3D printed concrete[J]. Composites Part A: Applied Science and Manufacturing,2019,125: 105533.
[4] [4] PANDA B,RUAN S Q,UNLUER C,et al. Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing[J]. Composites Part B: Engineering,2020,186: 107826.
[5] [5] YU Y,LI B,XU L J,et al. Research on the influence of basalt fiber on the properties of 3D printed recycled cement-based materials[J]. China Concrete and Cement Products,2021(12): 45-49 (in Chinese).
[6] [6] BAI G,WANG L,WANG F,et al. Investigation of the printability and mechanical properties of 3D printing UHPC[J]. Materials Reports,2021,35(12): 12063-12069 (in Chinese).
[7] [7] ZHANG Y,ZHANG Y S,YANG L,et al. Hardened properties and durability of large-scale 3D printed cement-based materials[J]. Materials and Structures,2021,54(1): 45.
[8] [8] LI W H,WANG Q,CHEN X H,et al. Effect of fiber on mechanical properties of 3D printing cement-based materials[J]. Journal of Experimental Mechanics,2021,36(4): 499-506 (in Chinese).
[9] [9] ZHANG Y,ZHU Y M,REN Q,et al. Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials[J]. Construction and Building Materials,2023,400: 132750.
[10] [10] ZHOU G M,HANG M Y,LU L,et al. Material parameters and anisotropy research of 3D printing mortar after incorporating with aeolian sand[J]. Materials Reports,2022,36(9): 109-113 (in Chinese).
[11] [11] PANDA B,TAN M J. Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application[J]. Materials Letters,2019,237: 348-351.
[12] [12] LIU Z X,LI M Y,WENG Y W,et al. Mixture design approach to optimize the rheological properties of the material used in 3D cementitious material printing[J]. Construction and Building Materials,2019,198: 245-255.
[13] [13] ZHANG Y,ZHANG Y S,LIU G J,et al. Fresh properties of a novel 3D printing concrete ink[J]. Construction and Building Materials,2018,174: 263-271.
[14] [14] LI W H,CHANG X D,WANG Q,et al. Effect of mineral admixture on properties of 3D printing cement-based materials[J]. Bulletin of the Chinese Ceramic Society,2020,39(10): 3101-3107+3114 (in Chinese).
[15] [15] YANG Q R,ZHAO Z Z,XIAO J Z,et al. Effect of mineral admixtures and chemical admixtures on performance of 3D printing mortar[J]. Journal of Building Materials,2021,24(2): 412-418 (in Chinese).
[16] [16] ZHAO Y,WU X K,ZHU L L,et al. Influence of basalt fiber on the printability of 3D printing cement-based materials[J]. Acta Materiae Compositae Sinica,2022,39(11): 5537-5547 (in Chinese).
[17] [17] BONG S H,NEMATOLLAHI B,NAZARI A,et al. Fresh and hardened properties of 3D printable geopolymer cured in ambient temperature[C]//RILEM International Conference on Concrete and Digital Fabrication. Cham: Springer,2019: 3-11.
[18] [18] SUREHALI S,TRIPATHI A,NIMBALKAR A S,et al. Anisotropic chloride transport in 3D printed concrete and its dependence on layer height and interface types[J]. Additive Manufacturing,2023,62: 103405.
[19] [19] NING B,LIU M M,WANG W F. Analysis of durability and hydration characteristics of metakaolin concrete[J]. Multipurpose Utilization of Mineral Resources,2022(6): 49-54+60 (in Chinese).
[20] [20] WANG Q. Research on the pivotal technology of 3D printed concrete arch bridge[D].Hangzhou: Zhejiang University,2019 (in Chinese).
[21] [21] WANG L,WANG B L,BAI G,et al. Experimental study on the mechanical anisotropy of 3D printed concrete[J]. Journal of Experimental Mechanics,2020,35(2): 243-250 (in Chinese).
[22] [22] DENG L,WEN Y,HAN G Q,et al. Relationship between pore fractal dimension and air permeability of lithium slag concrete[J]. Concrete,2017(5): 68-71 (in Chinese).
[23] [23] LI Y X,CHEN Y M,HE X Y,et al. Pore volume fractal dimension of fly ash-cement paste and its relationship between the pore structure and strength[J]. Journal of the Chinese Ceramic Society,2003,31(8): 774-779 (in Chinese).
Get Citation
Copy Citation Text
ZHANG Zhaorui, LUO Surong, LIN Xin. Anisotropic of 3D Printed Cement-Based Materials Reinforced with Metakaolin and Limestone Powder[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(5): 1651
Special Issue:
Received: Jan. 19, 2024
Accepted: --
Published Online: Aug. 15, 2024
The Author Email: Surong LUO (lsr@fzu.edu.cn)
CSTR:32186.14.