[1] [1] BLAKERS A. Development of the PERC solar cell[J]. IEEE Journal of Photovoltaics, 2019, 9(3): 629-635.

[2] [2] SCHMIDT J, ABERLE A G, HEZEL R. Investigation of carrier lifetime instabilities in CZ-grown silicon[C]//Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference. Anaheim, CA, USA. IEEE: 13-18.

[3] [3] TAO Y G, UPADHYAYA V, JONES K, et al. Tunnel oxide passivated rear contact for large area n-type front junction silicon solar cells providing excellent carrier selectivity[J]. AIMS Materials Science, 2016, 3(1): 180-189.

[4] [4] TAGUCHI M, YANO A, TOHODA S, et al. 24.7% record efficiency HIT solar cell on thin silicon wafer[J]. IEEE Journal of Photovoltaics, 2014, 4(1): 96-99.

[5] [5] SCHWARTZ R J, LAMMERT M D. Silicon solar cells for high concentration applications[C]//1975 International Electron Devices Meeting. Washington, DC, USA. IEEE, 2005: 350-352.

[6] [6] KOPECEK R, LIBAL J, LOSSEN J, et al. ZEBRA technology: low cost bifacial IBC solar cells in mass production with efficiency exceeding 23.5%[C]//2020 47th IEEE Photovoltaic Specialists Conference (PVSC). Calgary, AB, Canada. IEEE, 2020: 1008-1012.

[7] [7] LIU J J, YAO Y, XIAO S Q, et al. Review of status developments of high-efficiency crystalline silicon solar cells[J]. Journal of Physics D: Applied Physics, 2018, 51(12): 123001.

[8] [8] FAN X Y, RABELO M, HU Y F, et al. Factors affecting the performance of HJT silicon solar cells in the intrinsic and emitter layers: a review[J]. Transactions on Electrical and Electronic Materials, 2023, 24(2): 123-131.

[9] [9] LONG W, YIN S, PENG F G, et al. On the limiting efficiency for silicon heterojunction solar cells[J]. Solar Energy Materials and Solar Cells, 2021, 231: 111291.

[10] [10] LIU C F, CHEN D M, CHEN Y F, et al. Industrial TOPCon solar cells on n-type quasi-mono Si wafers with efficiencies above 23%[J]. Solar Energy Materials and Solar Cells, 2020, 215: 110690.

[14] [14] GAO J Q, QU X Y, GUO Y G, et al. Over 700 mV IBC solar cell by optimizing front surface field passivation[J]. IEEE Journal of Photovoltaics, 2023, 13(1): 56-60.

[15] [15] OKAMOTO C, KOIDE N, SUGIYAMA S, et al. Fabrication of 25.1% efficient hetero junction back contact Si solar cells by mass-production process[C]//2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC). Waikoloa, HI, USA. IEEE, 2018: 2052-2054.

[16] [16] BAO J H, TAO K, LIN Y R, et al. The n-type Si-based materials applied on the front surface of IBC-SHJ solar cells[J]. Chinese Physics B, 2019, 28(9): 098201.

[17] [17] PROCEL P, YANG G T, ISABELLA O, et al. Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells[J]. Solar Energy Materials and Solar Cells, 2018, 186: 66-77.

[18] [18] YANG G T, ZHANG Y, PROCEL P, et al. Poly-Si(O)x passivating contacts for high-efficiency c-Si IBC solar cells[J]. Energy Procedia, 2017, 124: 392-399.

[19] [19] YOUNG D L, NEMETH W, LASALVIA V, et al. Ion implanted passivated contacts for interdigitated back contacted solar cells[C]//2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC). New Orleans, LA, USA. IEEE, 2015: 1-5.

[20] [20] GALLENI L, FRAT M, RADHAKRISHNAN H S, et al. Mechanisms of charge carrier transport in polycrystalline silicon passivating contacts[J]. Solar Energy Materials and Solar Cells, 2021, 232: 111359.

[21] [21] PEIBST R, RMER U, LARIONOVA Y, et al. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?[J]. Solar Energy Materials and Solar Cells, 2016, 158: 60-67.

[22] [22] O’NEILL A G. An explanation of the asymmetry in electron and hole tunnel currents through ultra-thin SiO2 films[J]. Solid-State Electronics, 1986, 29(3): 305-310.

[23] [23] YAMAMOTO T, UWASAWA K, MOGAMI T. Bias temperature instability in scaled p+ polysilicon gate p-MOSFET's[J]. IEEE Transactions on Electron Devices, 1999, 46(5): 921-926.

[24] [24] FELDMANN F, MLLER R, REICHEL C, et al. Ion implantation into amorphous Si layers to form carrier-selective contacts for Si solar cells[J]. Physica Status Solidi (RRL)-Rapid Research Letters, 2014, 8(9): 767-770.

[26] [26] RICHTER A, MLLER R, BENICK J, et al. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses[J]. Nature Energy, 2021, 6: 429-438.

[27] [27] RMER U, PEIBST R, OHRDES T, et al. Ion implantation for poly-Si passivated back-junction back-contacted solar cells[J]. IEEE Journal of Photovoltaics, 2015, 5(2): 507-514.

[28] [28] LI Y P, YE F, LIU Y Q, et al. Research of annealing and boron doping on SiOx/p+-poly-Si hole-selective passivated contact[J]. IEEE Journal of Photovoltaics, 2020, 10(6): 1552-1556.

[29] [29] CHOI W J, JAIN A, HUANG Y Y, et al. Quantitative understanding and implementation of screen printed p poly-Si/oxide passivated contact to enhance the efficiency of p-PERC cells[C]//2020 47th IEEE Photovoltaic Specialists Conference (PVSC). Calgary, AB, Canada. IEEE, 2020: 821-824.

[30] [30] MACK S, SCHUBE J, FELLMETH T, et al. Metallisation of boron-doped polysilicon layers by screen printed silver pastes[J]. Physica Status Solidi (RRL)-Rapid Research Letters, 2017, 11(12): 1-4.