[1] [1] CHEN J Y. A broadband wavelength demultiplexer assisted by SWG-based directional couplers[J]. Optik, 2020, 202: 163602-1-163602-6.

[2] [2] PAN P, AN J, ZHANG J, et al. Flat-top AWG based on InP deep ridge waveguide[J]. Optics Communications, 2015, 355: 376-381.

[5] [5] JAYATILLEKA H, MURRAY K, CAVERLEY M, et al. Crosstalk in SOI microring resonator-based filters [J]. Journal of Lightwave Technology, 2016, 34（12）: 2886-2896.

[6] [6] AMMARI M, BENMERKHI A, BOUCHEMAT M. Four channel optical demultiplexer based on L2 photonic crystal microcavity[J]. Optica Applicata, 2022, 52（4）: 613-625.

[7] [7] XU Y, ZHOU W, CHEN K H, et al. Y-branch wavelength demultiplexer based on topological valley photonic crystals[J]. Optica&Laser Technology, 2022, 155: 108422-1-108422-5.

[8] [8] FAGHANI A A, RAFIEE Z, AMANZADEH H, et al. Tunable bandpass plasmonic filter and wavelength triple-channel demultiplexer based on square nanodisk resonator in MIM waveguide [J]. Optik, 2022, 257: 168824-1-168824-8.

[9] [9] LIU Z H, LIU X H, LU C C, et al. Integrated nanophotonic wavelength router based on an intelligent algorithm [J]. Optica, 2019, 6 （10）: 1367-1373.

[10] [10] SHEN B, WANG P, POLSON R, et al. An integrated nanophotonics polarization beamsplitter with 2.4×2.4 m2 footprint [J]. Nature Photonics, 2015, 9: 378-382.

[11] [11] PIGGOTTA Y, PETYKIEWICZ J, SU L, et al. Fabrication-constrained nanophotonic inverse design [J]. Scientific Reports, 2017, 7 （1）: 1786-1-1786-7.

[12] [12] MOLESKY S, LIN Z, PIGGOTT A Y, et al. Inverse design in nanophotonics[J]. Nature Photonics, 2018, 12: 659-670.

[13] [13] SU L, PIGGOTT A Y, SAPRA N V, et al. Inverse design and demonstration of a compact on-chip narrowband three-channel wavelength demultiplexer[J]. Acs Photonics, 2018, 5（2）: 301-305.

[15] [15] SHEN B, WANG P, POLSON R, et al. An integrated-nanophotonics polarization beamsplitter with 2.4×2.4 m2 footprint [J]. Nature Photonics, 2015, 9（6）: 378-382.

[16] [16] MA H, HUANG J, ZHANG K, et al. Arbitrary-direction, multichannel and ultra-compact power splitters by inverse design method[J]. Optics Communications, 2020, 462: 125329-1-125329-7.

[17] [17] LU J, VUKOVI J. Nanophotonic computational design [J]. Optics Express, 2013, 21（11）: 13351-13367.

[18] [18] SU L, PIGGOTT A Y, SAPRA N V, et al. Inverse design and demonstration of a compact on-chip narrowband three-channel wavelength demultiplexer[J]. Acs Photonics, 2018, 5（2）: 301-305.

[19] [19] HAN J, HUANG J, WU J, et al. Inverse designed tunable four-channel wavelength demultiplexer [J]. Optics Communications, 2020, 465: 125606-1-125606-5.

[20] [20] YILMAZ Y A, ALPKILIC A M, YELTIK A, et al. Inverse design of efficient and compact 1×N wavelength demultiplexer[J]. Optics Communications, 2020, 454: 124522-1-124522-7.

[21] [21] DENG Z Y, DANG Z Q, CHEN T, et al. 3-port beam splitter of arbitrary power ratio enabled by deep learning on a multimode waveguide [J]. Optica & Laser Technology, 2024, 169: 109950-1-109950-7.

[22] [22] WANG H Q, HUANG H, HU C Y, et al. Ultra-compact integrated 180-deg separation beam splitter on chip[J]. Optical Engineering, 2021, 60 （11）: 115102-1-115102-8.

[23] [23] HUANG H, XU H, WANG H, et al. Ultrabroadband and-compact chip-integrated polarization beam splitters based on intelligent inverse design method[J]. Optical Engineering, 2022, 61（1）: 015105-1-015105-9.

[24] [24] WANG H Q, XU H Q, HUANG H, et al. Ultra-broadband and ultra-compact chip-integrated logic gates based on an inverse design method[J]. Optics & Laser Technology, 2024, 169: 110192-1-110192-9.

[25] [25] IZMAILOV A F, SOLODOV M V. On attraction of linearly constrained Lagrangian methods and of stabilized and quasi-Newton SQP methods to critical multipliers[J]. Mathematical Programming, 2011, 126（2）: 231-257.

[26] [26] LABANDA S R, STOLPE M, An efficient second-order SQP method for structural topology optimization [J]. Struct Multidisc Optim, 2016, 53 （6）: 1315-1333.