[1] A TERRANI K. Accident tolerant fuel cladding development: promise, status, and challenges. Journal of Nuclear Materials, 501, 13-30(2018).

[2] J ZINKLE S, A TERRANI K, C GEHIN J et al. Accident tolerant fuels for LWRs: a perspective. Journal of Nuclear Materials, 448, 374-379(2014).

[3] B REBAK R. Accident Tolerant Materials for Light Water Reactor Fuels, 1st edition. Netherlands: Elsevier, 63-81(2020).

[4] Z DUAN, H YANG, Y SATOH et al. Current status of materials development of nuclear fuel cladding tubes for light water reactors. Nuclear Engineering and Design, 316, 131-150(2017).

[5] G KIM H, H KIM I, I JUNG Y et al. Out-of-pile performance of surface-modified Zr cladding for accident tolerant fuel in LWRs. Journal of Nuclear Materials, 510, 93-99(2018).

[6] G KIM H, H KIM I, I JUNG Y et al. Adhesion property and high-temperature oxidation behavior of Cr-coated Zircaloy-4 cladding tube prepared by 3D laser coating. Journal of Nuclear Materials, 465, 531-539(2015).

[7] C BRACHET J, I IDARRAGA T, L FLEM M et al. Early studies on Cr-Coated Zircaloy-4 as enhanced accident tolerant nuclear fuel claddings for light water reactors. Journal of Nuclear Materials, 517, 268-285(2019).

[8] J TALLMAN D, B ANASORI, W BARSOUM M. A critical review of the oxidation of Ti₂AlC, Ti₃AlC₂ and Cr₂AlC in air. Materials Research Letters, 1, 115-125(2013).

[9] H WANG X, C ZHOU Y. Layered machinable and electrically conductive Ti₂AlC and Ti₃AlC₂ ceramics: a review. Journal of Materials Science & Technology, 26, 385-416(2010).

[10] Y NIU, S FU, K ZHANG et al. Synthesis, microstructure, and properties of high purity Mo₂TiAlC₂ ceramics fabricated by spark plasma sintering. Journal of Advanced Ceramics, 9, 759-768(2020).

[11] E OPILA, N JACOBSON, D MYERS et al. Predicting oxide stability in high-temperature water vapor. The Journal of The Minerals,Metals & Materials Society, 58, 22-28(2006).

[12] E OPILA, D MYERS. Alumina volatility in water vapor at elevated temperatures. Journal of the American Ceramic Society, 87, 1701-1705(2003).

[13] C TANG, M STEINBRUECK, M STUEBER et al. Deposition, characterization and high-temperature steam oxidation behavior of single-phase Ti₂AlC-coated Zircaloy-4. Corrosion Science, 135, 87-98(2018).

[14] W LI, Z WANG, J SHUAI et al. A high oxidation resistance Ti₂AlC coating on Zirlo substrates for loss-of-coolant accident conditions. Ceramics International, 45, 139-139(2019).

[15] X LI, Y QIAN, L ZHENG et al. Determination of the critical content of Al for selective oxidation of Ti₃AlC₂ at 1100℃. Journal of the European Ceramic Society, 36, 3311-3318(2016).

[16] J WANG, Y ZHOU, T LIAO et al. A first-principles investigation of the phase stability of Ti₂AlC with Al vacancies. Scripta Materialia, 58, 227-230(2008).

[17] J FRODELIUS, P EKLUND, M BECKERS et al. Sputter deposition from a Ti₂AlC target: process characterization and conditions for growth of Ti₂AlC. Thin Solid Films, 518, 1621-1626(2010).

[18] X WANG, Y ZHOU. High-temperature oxidation behavior of Ti₂AlC in air. Oxidation of Metals, 59, 303-320(2003).

[19] J ZHU, G QI, F WANG et al. Effect of aluminum content on synthesis of Ti₂AlC and Ti₃AlC₂ during treatment in a high-energy mill and hot pressing. Metal Science and Heat Treatment, 53, 45-48(2011).

[20] Z WANG, J SUN, B XU et al. Reducing the self-healing temperature of Ti₂AlC MAX phase coating by substituting Al with Sn. Journal of the European Ceramic Society, 40, 197-201(2020).

[21] J LIN Z, J ZHUO M, C ZHOU Y et al. Microstructural characterization of layered ternary Ti₂AlC. Acta Materialia, 54, 1009-1015(2006).

[22] E PAWEL R. The kinetics of oxidation of Zircaloy-4 in steam at high temperatures. Journal of The Electrochemical Society, 126, 1105(1979).

[23] C WAGNER. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys. Journal of The Electrochemical Society, 99, 369(1952).

[24] H PARK J, G KIM H, Y PARK J et al. High temperature steam-oxidation behavior of arc ion plated Cr coatings for accident tolerant fuel claddings. Surface and Coatings Technology, 280, 256-259(2015).

[25] A PINT B, A TERRANI K, P BRADY M et al. High temperature oxidation of fuel cladding candidate materials in steam-hydrogen environments. Journal of Nuclear Materials, 440, 420-427(2013).

[26] A TERRANI K, A PINT B, M PARISH C et al. Silicon carbide oxidation in steam up to 2 MPa. Journal of the American Ceramic Society, 97, 2331-2352(2014).

[27] S BASU, N OBANDO, A GOWDY et al. Long-term oxidation of Ti₂AlC in air and water vapor at 1000-1300 ℃ temperature range. Journal of The Electrochemical Society, 159, C90-C96(2011).

[28] I YOUNKER, M FRATONI. Neutronic evaluation of coating and cladding materials for accident tolerant fuels. Progress in Nuclear Energy, 88, 10-18(2016).