[1] [1] LIU ZH Y,LOU X,DENG W J,et al..Multi-mode optimization technique for large optical aspheric mirror ［J］.Opt. Precision Eng.,2013,21(11):2791-2797.(in Chinese)

[2] [2] YE W N,DONG J H.Optimized design for light weight structural parameters for large-aperture primary mirror［J］.Chinese Optics,2012,5(3)：222-228.(in Chinese)

[3] [3] ZHANG J X.Overview of structure technologies of large aperture ground-based telescopes［J］.Chinese Optics,2012(4)：327-336.(in Chiense)

[4] [4] FAN L, ZHANG J X, WU X X, et al.. Optimum design of edge lateral support for large aperture lightweight primary mirror［J］. Opt. Precision Eng., 2012,20(10):2207-2213.(in Chinese)

[5] [5] ZENG C M, GUO P J, YU J C. Demonstration and analysis on correction of 0. 5 m ultra-thin mirror with active supports［J］. Opt. Precision Eng., 2010,18(3):570-578.(in Chinese)

[6] [6] LI HZ, LIN XD, LIU XY, et al. Experiment system of 400 mm thin-mirror active optics［J］. Opt. Precision Eng., 2009,17(9):2076-2083.(in Chinese)

[7] [7] CHEN PC, ROMEO RC. Advances in composite mirror and telescope technology［J］. Proceedings of SPIE, 2004, 5382:397-403.

[8] [8] CHEN P C, BOWERS C W, A CONTENT D, et al.. Advances in very lightweight composite mirror technology ［J］. Optical Engineering, 2000,39(9):2320-2329.

[9] [9] PARADIES R,HERTWIG M. Shape control of adaptive composite reflectors［J］. Composites Part B: Engineering, 1999, 30(1):65-78.

[10] [10] PARADIES R, HERTWIG M, ELSPASS WJ. Shape control of an adaptive mirror at different angles of inclination ［J］. Journal of Intelligent Material Systems and Structures, 1996, 7(2):203-210.

[11] [11] AGRAWAL B N, TREANOR K E. Shape control of a beam using piezoelectric actuators［J］. Smart Materials & Structures, 1999, 8(6):729-739.

[12] [12] SUN D, TONG L. Design optimization of piezoelectric actuator patterns for static shape control of smart plates［J］. Smart Materials & Structures, 2005, 14:1353-1362.

[13] [13] MASTERS I G, EVANS K E. Models for the elastic deformation of honeycombs［J］. Composite Structures, 1996, 35(4):403-422.

[14] [14] GIBSON L J, ASHBY M F, SCHAJER G S, et al.. The mechanics of two-dimensional cellular materials ［J］. Proceedings of the Royal Society of London A Mathematical and Physical Sciences, 1982, 382(1782):25-42.

[15] [15] MEHTA P K. Moment actuator influence function for flat circular deformable mirrors［J］. Advances in Optical Structure Systems, 1990, 29:2-19.

[16] [16] LIU CHCH-H. Structural analysis and design of adaptive lightweight mirrors［D］. USA: Massachusetts Institute of Technology, 1993.

[17] [17] REDDY J N. Mechanics of laminated composite plates and shells : theory and analysis［M］. Second ed. New York: CRC PRESS, 1945.

[18] [18] CHEN DH. Equivalent flexural and torsional rigidity of hexagonal honeycomb［J］. Composite Structures, 2011, 93(7):1910-1917.

[19] [19] REDDY J N. On laminated composite plates with integrated sensors and actuators［J］. Engineering Structures, 1999, 21(7):568-593.

[20] [20] ZIENKIEWICZ O C, TAYLOR R L. The Finite Element Method 5th edition［M］. London: McGraw-Hill, 2000.

[21] [21] MOITA J, SOARES C,SOARES C. Geometrically non-linear analysis of composite structures with integrated piezoelectric sensors and actuators ［J］. Composite Structures, 2002, 57:253-261.

[22] [22] WANG XC. Finite Element Method［M］. Beijing: Tsinghua University Press, 2003. (in Chinese)

[23] [23] NELSON J E, LUBLINER J, MAST TS. Telescope Mirror Supports: Plate Deflections On Point Supports ［J］. Advanced Technology Optical Telescopes, 1982, 332:212-228.

[24] [24] PARADIES R. Designing quasi-isotropic laminates with respect to bending［J］. Composites Science and Technology, 1996, 56(4):461-472.