Journal of the Chinese Ceramic Society, Volume. 52, Issue 6, 1953(2024)

Additive Manufacturing of Lead Zirconate Titanate Piezoelectric Ceramic by Fused Deposition Modeling

LIU Yueming1... DONG Haolin1, LIU Peng1, YANG Xianfeng1,*, ZHAO Wei2 and XIE Zhipeng3 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(36)

    [1] [1] CHEN C, WANG X, WANG Y, et al. Additive manufacturing of piezoelectric materials[J]. Adv Funct Materials, 2020, 30(52): 2005141.

    [2] [2] CHEN Z Y, SONG X, LEI L W, et al. 3D printing of piezoelectric element for energy focusing and ultrasonic sensing[J]. Nano Energy, 2016, 27: 78-86.

    [3] [3] YANG Juntao, ZUO Wenjian, ZHANG Wenlong, et al. Bull Chin Ceram Soc, 2023, 42(1): 111-122.

    [4] [4] YE Jingjing, ZHOU Kechao, YAN Mingyang, et al. J Chin Ceram Soc, 2023, 51(3): 738-749.

    [5] [5] YAO Fangzhou, WU Chaofeng, LI Jingfeng, et al. J Chin Ceram Soc, 2022, 50(3): 587-597.

    [6] [6] WANG Danyu, WANG Anjiu, WANG Wusong, et al. J Ceram, 2021, 42(3): 376-388.

    [7] [7] BOUMCHEDDA K, HAMADI M, FANTOZZI G. Properties of a hydrophone produced with porous PZT ceramic[J]. J Eur Ceram Soc, 2007, 27(13-15): 4169-4171.

    [8] [8] OKAYASU M, WATANABE K. Precise analysis of compressive strain effects on electric power generation properties of a lead zirconate titanate piezoelectric ceramic[J]. J Adv Ceram, 2016, 5(1): 35-39.

    [9] [9] YAN Feng, HUAN Zhengli, WANG Wenlin. Bull Chin Ceram Soc, 2015, 34(4): 1175-1179.

    [10] [10] YANG Shuai, WANG Mingwen, WU Jie, et al. J Chin Ceram Soc, 2022, 50(3): 598-607.

    [11] [11] YUNUS D E, HE R, SHI W T, et al. Short fiber reinforced 3d printed ceramic composite with shear induced alignment[J]. Ceram Int, 2017, 43(15): 11766-11772.

    [12] [12] KORUZA J, BELL A J, FR?MLING T, et al. Requirements for the transfer of lead-free piezoceramics into application[J]. J Materiomics, 2018, 4(1): 13-26.

    [13] [13] CHENG J, CHEN Y, WU J W, et al. 3D printing of BaTiO3 piezoelectric ceramics for a focused ultrasonic array[J]. Sensors, 2019, 19(19): 4078.

    [14] [14] CUI H C, HENSLEIGH R, YAO D S, et al. Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response[J]. Nat Mater, 2019, 18(3): 234-241.

    [15] [15] LIU K, SUN H J, TAN Y L, et al. Additive manufacturing of traditional ceramic powder via selective laser sintering with cold isostatic pressing[J]. Int J Adv Manuf Technol, 2017, 90(1): 945-952.

    [16] [16] LEE J H, HWANG H J, KIM J H, et al. Ceramic ink-jet printing on glass substrate using oleophobic surface treatment[J]. J Korean Ceram Soc, 2016, 53(1): 75-80.

    [17] [17] BAO Xiulan, CHEN Yan, JI Hongwei, et al. J Ceram, 2019, 40(2): 153-158.

    [18] [18] HU X P, LI X S, YAN K, et al. Fabrication of porous PZT ceramics using micro-stereolithography technology[J]. Ceram Int, 2021, 47(22): 32376-32381.

    [19] [19] LIU K, ZHOU C Y, HU J M, et al. Fabrication of Barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer[J]. J Eur Ceram Soc, 2021, 41(12): 5909-5917.

    [20] [20] LI Z Y, LI J, LUO H, et al. Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures[J]. J Eur Ceram Soc, 2022, 42(9): 3841-3847.

    [21] [21] GIBERTI H, STRANO M, ANNONI M. An innovative machine for Fused Deposition Modeling of metals and advanced ceramics[J]. MATEC Web Conf, 2016, 43: 03003.

    [22] [22] CHEN Z W, LI Z Y, LI J J, et al. 3D printing of ceramics: A review[J]. J Eur Ceram Soc, 2019, 39(4): 661-687.

    [23] [23] DECKERS J, MEYERS S, KRUTH J P, et al. Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures[J]. Phys Procedia, 2014, 56: 117-124.

    [24] [24] WANG M, XIE C, HE R J, et al. Corrections to: Polymer-derived silicon nitride ceramics by digital light processing based additive manufacturing[J]. J Am Ceram Soc, 2019, 102(12): 7769-7770.

    [25] [25] KRINITCYN M, FU Z W, HARRIS J, et al. Laminated object manufacturing of in-situ synthesized MAX-phase composites[J]. Ceram Int, 2017, 43(12): 9241-9245.

    [26] [26] XIE H H, YANG X F, LIU P, et al. 3D gel printing of alumina ceramics followed by efficient multi-step liquid desiccant drying[J]. J Eur Ceram Soc, 2021, 41(13): 6634-6640.

    [27] [27] ONAGORUWA S, BOSE S, BANDYOPADHYAY A. Fused deposition of ceramics (FDC) and composites[J]. Proc Solid Free Fabr Symp, 2001: 224-231.

    [28] [28] HE Q L, JIANG J, YANG X F, et al. Additive manufacturing of dense zirconia ceramics by fused deposition modeling via screw extrusion[J]. J Eur Ceram Soc, 2021, 41(1): 1033-1040.

    [29] [29] ZHANG Li, YANG Xianfeng, XU Xiewen, et al. J Inorg Mater, 2021, 36(4): 436-442.

    [30] [30] LOUS G M, CORNEJO I A, MCNULTY T F, et al. Fabrication of Piezoelectric Ceramic/Polymer Composite Transducers using Fused Deposition of Ceramics[J]. MRS Online Proc Libr, 1998, 542(1): 105-110.

    [31] [31] KO?IR T, SLAVI? J. Single-process fused filament fabrication 3D-printed high-sensitivity dynamic piezoelectric sensor[J]. Addit Manuf, 2022, 49: 102482.

    [32] [32] KIM H, ISLAM M T, MD DIDARUL I, et al. Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing[J]. MRS Commun, 2017, 7(4): 960-966.

    [33] [33] TAO R, SHI J H, GRANIER F, et al. Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications[J]. Appl Mater Today, 2022, 29: 101596.

    [34] [34] LIU K, XIA Y H, ZHANG Q Q, et al. Effect of the slurry composition on the piezoelectric properties of PZT ceramics fabricated via materials extrusion 3D printing[J]. Ceram Int, 2023, 49(12): 20024-20033.

    [35] [35] CHEN Y, BAO X L, WONG C M, et al. PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application[J]. Ceram Int, 2018, 44(18): 22725-22730.

    [36] [36] KUSCER D, DRNOV?EK S, LEVASSORT F. Inkjet-printing-derived lead-zirconate-titanate-based thick films for printed electronics[J]. Mater Des, 2021, 198: 109324.

    Tools

    Get Citation

    Copy Citation Text

    LIU Yueming, DONG Haolin, LIU Peng, YANG Xianfeng, ZHAO Wei, XIE Zhipeng. Additive Manufacturing of Lead Zirconate Titanate Piezoelectric Ceramic by Fused Deposition Modeling[J]. Journal of the Chinese Ceramic Society, 2024, 52(6): 1953

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Oct. 25, 2023

    Accepted: --

    Published Online: Aug. 26, 2024

    The Author Email: Xianfeng YANG (yangxfcsust@csust.edu.cn)

    DOI:10.14062/j.issn.0454-5648.20230821

    Topics