[1] [1] CORREAL J F, HERRN C A, CARRILLO J, et al. Performance of hybrid fiber-reinforced concrete for low-rise housing with thin walls[J]. Construction and Building Materials, 2018, 185: 519-529.

[2] [2] WANG L B, CUI G Y, ZHANG C P, et al. Failure characteristics and seismic behavior of steel basalt hybrid fiber reinforced concrete lining for the tunnel in strong earthquake areas[J]. Engineering Failure Analysis, 2024, 162: 108357.

[3] [3] KHAN M, CAO M L, CHU S H, et al. Properties of hybrid steel-basalt fiber reinforced concrete exposed to different surrounding conditions[J]. Construction and Building Materials, 2022, 322: 126340.

[4] [4] ALWESABI E A H, ABU BAKAR B H, ALSHAIKH I M H, et al. An experimental study of compressive toughness of steel-polypropylene hybrid fibre-reinforced concrete[J]. Structures, 2022, 37: 379-388.

[6] [6] DING Y N, ZHANG F S, TORGAL F, et al. Shear behaviour of steel fibre reinforced self-consolidating concrete beams based on the modified compression field theory[J]. Composite Structures, 2012, 94(8): 2440-2449.

[7] [7] ABDALLAH S, FAN M Z, ZHOU X M, et al. Anchorage effects of various steel fibre architectures for concrete reinforcement[J]. International Journal of Concrete Structures and Materials, 2016, 10(3): 325-335.

[8] [8] KWAN A K H, CHU S H. Direct tension behaviour of steel fibre reinforced concrete measured by a new test method[J]. Engineering Structures, 2018, 176: 324-336.

[9] [9] KWAN A K H, NG I Y T. Adding steel fibres to improve shock vibration resistance of concrete[J]. Magazine of Concrete Research, 2007, 59(8): 587-597.

[10] [10] YANG D P, ZHANG B, LIU G J. Experimental study on spall resistance of steel-fiber reinforced concrete slab subjected to explosion[J]. International Journal of Concrete Structures and Materials, 2021, 15(1): 23.

[11] [11] REITERMAN P, HOLCˇAPEK O, JOGL M, et al. Physical and mechanical properties of composites made with aluminous cement and basalt fibers developed for high temperature application[J]. Advances in Materials Science and Engineering, 2015, 2015: 703029.

[12] [12] XU J P, WANG J, ZHENG C F, Study on reinforcement mechanism and microscopic morphology of steel-basalt mixed fiber HPCC[J]. Construction and Building Materials, 2020, 256, 119480.

[13] [13] CAO K, LIU G G, LI H, et al. Mechanical properties and microstructures of Steel-basalt hybrid fibers reinforced cement-based composites exposed to high temperatures[J]. Construction and Building Materials, 2022, 341: 127730.

[14] [14] KHAN M, LAO J C, AHMAD M R, et al. Influence of high temperatures on the mechanical and microstructural properties of hybrid steel-basalt fibers based ultra-high-performance concrete (UHPC)[J]. Construction and Building Materials, 2024, 411: 134387.

[15] [15] CAO K, LIU G G, LI H, et al. Correlation between macroscopic properties and microscopic pore structure in steel-basalt hybrid fibers reinforced cementitious composites subjected to elevated temperatures[J]. Construction and Building Materials, 2023, 365: 129988.

[16] [16] KHAN M, CAO M L, XIE C P, et al. Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression[J]. Case Studies in Construction Materials, 2022, 16: e00941.

[17] [17] AFZAL M T, KHUSHNOOD R A, AHMED W. An experimental investigation on assessment of residual mechanical performance of basalt fiber reinforced high strength concrete at elevated temperature[J]. Fire Technology, 2022, 58(5): 3067-3090.

[18] [18] AN H M, SONG Y S, LIU L, et al. Experimental study of the compressive strengths of basalt fiber-reinforced concrete after various high-temperature treatments and cooling in open air and water[J]. Applied Sciences, 2021, 11(18): 8729.

[19] [19] JOSEPH L, MADHAVAN M K, JAYANARAYANAN K, et al. High temperature performance of concrete confinement by MWCNT modified epoxy based fiber reinforced composites[J]. Materials, 2022, 15(24): 9051.

[23] [23] WANG Q Z, LI W, XIE H P. Dynamic split tensile test of flattened Brazilian disc of rock with SHPB setup[J]. Mechanics of Materials, 2009, 41(3): 252-260.

[28] [28] SI B W, LI Z Q, YANG Y, et al. Dynamic indentation testing and characterization of metals based on the split Hopkinson pressure bar (SHPB) device[J]. Mechanics of Materials, 2023, 177: 104550.

[29] [29] YANG R, ZHANG J G, LIANG H Z, et al. Split Hopkinson pressure bar (SHPB) test and different modeling methods of aluminum honeycomb materials[J]. Strength of Materials, 2022, 54(1): 33-40.