[1] SHE JI-HONG, OHJI T, DENG ZHEN-YAN. Thermal shock behavior of porous silicon carbide ceramics[J]. Journal of the American Ceramic Society, 85, 2125-2127(2002).

[2] LIU SHI-FENG, ZENG YU-PING, JIANG DONG-LIANG. Effects of CeO₂ addition on the properties of cordierite-bonded porous SiC ceramics[J]. Journal of the European Ceramic Society, 29, 1795-1802(2009).

[3] PASTILA P H, HELANTI V, NIKKILA A P et al. Environmental effects on microstructure and strength of SiC-based hot gas filters[J]. Journal of the European Ceramic Society, 21, 1261-1268(2001).

[4] DAS D, KAYAL N, MARSOLA G A et al. Recycling of coal fly ash for fabrication of elongated mullite rod bonded porous SiC ceramic membrane and its application in filtration[J]. Journal of the European Ceramic Society, 40, 2163-2172(2020).

[5] BETKE U, LIRB A. Micro-macroporous composite materials- preparation techniques and selected applications: a review[J]. Advanced Engineering Materials, 20, 1800252(2018).

[6] DESHPANDE V S, ASHBY M F, FLECK N A. Foam topology bending versus stretching dominated architectures[J]. Acta Materialia, 49, 1035-1040(2001).

[7] ASHBY M F. The properties of foams and lattices[J]. Philosophical Transactions of the Royal Society A, 364, 15-30(2006).

[8] BAUER J, HENGSBACH S, TESARI I et al. High-strength celluar ceramic composites with 3D microarchitecture[J]. PNAS, 111, 2453-2458(2014).

[9] KAUR M, YUN T G, HAN S M et al. 3D printed stretching- dominated micro-trusses[J]. Materials and Design, 134, 272-280(2017).

[10] FERRARO C, GARCIA-TUNON E, ROCHA V G et al. Light and strong SiC networks[J]. Advanced Functional Materials, 26, 1636-1645(2016).

[11] WANG CHANG-AN, HUANG YONG, ZHAI HONG-XIANG. The effect of whisker orientation in SiC whisker-reinforced Si₃N₄ ceramic matrix composites[J]. Journal of the European Ceramics Society, 19, 1903-1909(1999).

[12] MEYERS M A, CHEN PO-YU, LIN YU-MIN et al. Biological materials: structure and mechanical properties[J]. Progress in Materials Science, 53, 1-206(2008).

[13] ZHU QUAN, DONG XIANG, HU JIAN-BAO et al. High strength aligned SiC nanowire reinforced SiC porous ceramics fabricated by 3D printing and chemical vapor infiltration[J]. Ceramics International, 46, 6978-6983(2020).

[14] NADER M, ALDINGER F, HOFFMANN M J. Influence of the α/β SiC phase transformation on microstructural development and mechanical properties of liquid phase sintered silicon carbide[J]. Journal of Materials Science, 34, 1197-1204(1999).

[15] EOM J H, KIM Y W, SONG I H. Microstructure and properties of porous silicon carbide ceramics fabricated by carbothermal reduction and subsequent sintering process[J]. Materials Science and Engineering: A, 464, 129-134(2007).

[16] KIM Y W, EOM J H, GUO YAN-TING et al. Processing of open-cell silicon carbide foams by steam chest molding and carbothermal reduction[J]. Journal of the American Ceramics Society, 94, 344-347(2011).

[17] EOM J H, KIM Y W, SONG I H et al. Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates[J]. Journal of the European Ceramics of Society, 28, 1029-1035(2008).

[18] EOM J H, KIM Y W. Effect of additive composition on microstructure and strength of porous silicon carbide ceramics[J]. Journal of Materials Science, 44, 4482-4486(2009).

[19] SHIMAMURA A, FUKUSHIMA M, HOTTA M et al. New approach for macro porous RB-SiC derived from SiC/Novolac- type phenolic composite[J]. Journal of the American Ceramics Society, 99, 440-444(2016).

[20] VARELA-FERIA F M, MARTINEZ-FERNANDEZ J, ARELLANO- LOPEZ A R et al. Low density biomorphic silicon carbide: microstructure and mechanical properties[J]. Journal of the European Ceramics Society, 22, 2719-2725(2002).

[21] GIBSON L J, ASHBY M F. Cellular Solids: Structure and Properties, 2ed[J]. Cambridge University(1997).

[22] JANG DONG-CHAN, MEZA L R, GREER F et al. Fabrication and deformation of three-dimensional hollow ceramic nanostructures[J]. Nature Materials, 12, 893-898(2013).

[23] MIRANDA P, PAJARE A, SAIZ E et al. Fracture mode under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting[J]. Journal of Biomedial Materials Research Part A, 83, 646-655(2007).