[1] [1] WU P, WANG J, WANG X. A critical review of the use of 3-D printing in the construction industry［J］. Autom Constr, 2016, 68: 21-31.

[2] [2] WANGLER T, LLORET E, REITER L, et al. Digital concrete: opportunities and challenges［J］. RILEM Techn Lett, 2016(1): 67.

[3] [3] WANGLER T, ROUSSEL N, BOS F P, et al. Digital concrete: a review［J］. Cem Concr Res, 2019, 123: 105780.

[6] [6] MA G, WANG L. A critical review of preparation design and workability measurement of concrete material for largescale 3D printing［J］. Frontiers of Structural and Civil Engineering, 2018, 12(3): 382-400.

[7] [7] ZHANG Y, ZHANG Y, LIU G, et al. Fresh properties of a novel 3D printing concrete ink［J］. Constr Build Mater, 2018, 174: 263-271.

[9] [9] MALAEB Z, HACHEM H, TOURBAH A, et al. 3D concrete printing: machine and mix design［J］. Int J Civ Eng, 2015, 6(6): 14-22.

[10] [10] MARCHON D, KAWASHIMA S, BESSAIES-BEY H, et al. Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry［J］. Cem Concr Res, 2018, 112: 96-110.

[12] [12] REITER L, WANGLER T, ROUSSEL N, et al. The role of early age structural build-up in digital fabrication with concrete［J］. Cem Concr Res, 2018, 112: 86-95.

[13] [13] ZHANG Y, JIANG Z, ZHU Y, et al. Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose［J］. Constr Build Mater, 2021, 267: 120551.

[14] [14] LAGALY G. Principles of flow of kaolin and bentonite dispersions［J］. Appl Clay Sci, 1989, 4 (2): 105-123.

[15] [15] GOH R, LEHANE L B. Bentonite slurries-zeta potential, yield stress, adsorbed additive and time-dependent behaviour［J］. Rheol Acta, 2011, 50: 29-38.

[16] [16] VOIGT T, MBELE J J, WANG K, et al. Using fly ash, clay, and fibers for simultaneous improvement of concrete green strength and consolidatability for slip-form pavement［J］. J Mater Civ Eng, 2016, 22 (2): 196-206.

[17] [17] LONG W J, LIN C, TAO J L, et al. Printability and particle packing of 3D-printable limestone calcined clay cement composites［J］. Constr Build Mater, 2021, 282(7): 122647.

[18] [18] KAZEMIAN A, YUAN X, COCHRAN E, et al. Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture［J］. Constr Build Mater, 2017, 145: 639-647.

[19] [19] JIAO D, SHI C, YUAN Q, et al. Effect of constituents on rheological properties of fresh concrete-A review［J］. Cem Concr Compos, 2017, 83: 146-159.

[20] [20] TAY Y W D, QIAN Y, TAN M J. Printability region for 3D concrete printing using slump and slump flow test［J］. Composites Part B, 2019, 174: 106968.

[21] [21] PANDA B, TAN M J. Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing［J］. Ceram Int, 2018, 44 (9): 10258-10265.

[22] [22] MA G, LI Z, WANG L. Printable properties of cementitious material containing copper tailings for extrusion based 3D printing［J］. Constr Build Mater, 2018, 162: 613-627.

[24] [24] ROUSSEL N, OVARLEZ G, GARRAULT S, et al. The origins of thixotropy of fresh cement pastes［J］. Cem Concr Res, 2012, 42(1): 148-157.

[25] [25] SCHRAMM G. A practical Approach to Rheology and Rheometry［M］. Karlsruhe: Haake, 1994.

[26] [26] LIU M, HU Y, LAI Z, et al. Influence of various bentonites on the mechanical properties and impermeability of cement mortars［J］. Constr Build Mater, 2020, 241: 118015.

[27] [27] MESBOUA N, BENYOUNES K, BENMOUNAH A. Study of the impact of bentonite on the physico-mechanical and flow properties of cement grout［J］. Cogent Eng, 2018, 5(1): 1446252.

[28] [28] PLEE D, LEBEDENKO F, OBRECHT F, et al. Microstructure, permeability and rheology of bentonite-cement slurries［J］. Cem Concr Res, 1990, 20(1): 45-61.