International Journal of Extreme Manufacturing, Volume. 5, Issue 1, 15002(2023)

Crack-free high-aspect ratio holes in glasses by top–down percussion drilling with infrared femtosecond laser GHz-bursts

[in Chinese]1... [in Chinese]1, [in Chinese]2, [in Chinese]2 and [in Chinese]1,* |Show fewer author(s)
Author Affiliations
  • 1Université de Bordeaux-CNRS-CEA, CELIA UMR 5107, 33405 Talence, France
  • 2Amplitude, Cité de la Photonique, 11 Avenue de Canteranne, 33600 Pessac, France
  • show less
    References(29)

    [1] [1] Kerse C et al 2016 Ablation-cooled material removal with ultrafast bursts of pulses Nature 537 84–88

    [2] [2] Elahi P, Ak.aalan ., Ertek C, Eken K, Ilday F . and Kalayco.glu H 2018 High-power Yb-based all-fiber laser delivering 300 fs pulses for high-speed ablation-cooled material removal Opt. Lett. 43 535–8

    [3] [3] Bonamis G, Mishchick K, Audouard E, H.nninger C, Mottay E, Lopez J and Manek-H.nninger I 2019 High efficiency femtosecond laser ablation with gigahertz level bursts J. Laser Appl. 31 022205

    [4] [4] Mishchik K, Bonamis G, Qiao J, Lopez J, Audouard E, Mottay E, H.nninger C and Manek-H.nninger I 2019 High-efficiency femtosecond ablation of silicon with GHz repetition rate laser source Opt. Lett. 44 2193–6

    [5] [5] Bonamis G, Audouard E, H.nninger C, Lopez J, Mishchik K, Mottay E and Manek-H.nninger I 2020 Systematic study of laser ablation with GHz bursts of femtosecond pulses Opt. Express 28 27702–14

    [6] [6] Obata K, Caballero-Lucas F and Sugioka K 2021 Material processing at GHz burst mode by femtosecond laser ablation J. Laser Micro Nanoeng. 16 19–23

    [7] [7] Balachninait. O, Tamulien. V, Eicˇas L and Vaicˇaitis V 2021 Laser micromachining of steel and copper using femtosecond laser pulses in GHz burst mode Results Phys. 22 103847

    [8] [8] Hirsiger T, Gafber M, Remund S, Chaja M V, Urniezius A, Butkus S and Neuenschwander B 2020 Machining metals and silicon with GHz bursts: surprising tremendous reduction of the specific removal rate for surface texturing applications Proc. SPIE 11267 112670T

    [9] [9] .emaitis A, Gaidys M, Gecˇys P, Barkauskas M and Gedvilas M 2021 Femtosecond laser ablation by bibursts in the MHz and GHz pulse repetition rates Opt. Express 29 7641–53

    [10] [10] Remund S M, Gafner M, Chaja M V, Urniezius A, Butkus S and Neuenschwander B 2020 Milling applications with GHz burst: investigations concerning the removal rate and machining quality Proc. CIRP 94 850–5

    [11] [11] Hendow S, Takahashi H, Yamaguchi M and Xu J Z 2020 Enhanced ablation using GHz-pulsed fs laser Proc. SPIE 11268 1126809

    [12] [12] Schwarz S, Rung S, Esen C and Hellmann R 2021 Enhanced ablation efficiency using GHz bursts in micromachining fused silica Opt. Lett. 46 282–5

    [13] [13] Courvoisier F, Zhang J, Bhuyan M K, Jacquot M and Dudley J M 2013 Applications of femtosecond Bessel beams to laser ablation Appl. Phys. A 112 29–34

    [14] [14] Brusberg L, Queisser M, Gentsch C, Schr.der H and Lang K D 2012 Advances in CO2-laser drilling of glass substrates Phys. Proc. 39 548–55

    [15] [15] Hidai H, Matsusaka S, Chiba A and Morita N 2015 Heat accumulation in microdrilled glass from ultraviolet laser ablation Appl. Phys. A 120 357–67

    [16] [16] Hidai H, Itoh S and Tokura H 2011 High-aspect-ratio microdrilling with laser ablation Proc. Int. Conf. on Leading Edge Manufacturing in 21st Century: LEM21 (Tokyo: The Japan Society of Mechanical Engineers)

    [17] [17] Kawasuji Y, Fujimoto J, Kobayashi M, Suwa A, Mizutani A, Arakawa M, Onose T and Mizoguchi H 2020 Deep ultraviolet excimer laser processing for the micro via hole on semiconductor package J. Laser Appl. 32 022076

    [18] [18] Sugioka K 2021 Will GHz burst mode create a new path to femtosecond laser processing? Int. J. Extreme Manuf. 3 043001

    [19] [19] Lopez J, Niane S, Bonamis G, Balage P, Audouard E, H.nninger C, Mottay E and Manek-H.nninger I 2022 Percussion drilling in glasses and process dynamics with femtosecond laser GHz-bursts Opt. Express 30 12533–44

    [20] [20] Carr C W, Radousky H B, Rubenchik A M, Feit M D and Demos S G 2004 Localized dynamics during laser-induced damage in optical materials Phys. Rev. Lett. 92 087401

    [21] [21] Caulier O D et al 2015 Femtosecond laser pulse train interaction with dielectric materials Appl. Phys. Lett. 107 181110

    [22] [22] Obata K, Sugioka K, Toyoda K and Midorikawa K 2003 Enhance refractive index modification of fused silica by multiwavelength excitation process using F2 and KrF excimer lasers RIKEN Rev. 50 42–46

    [23] [23] Nieto D, Arines J, O’Connor G M and Flores-Arias M T 2015 Single-pulse laser ablation threshold of borosilicate, fused silica, sapphire, and soda-lime glass for pulse widths of 500 fs, 10 ps, 20 ns Appl. Opt. 54 8596–601

    [24] [24] Yamamoto K, Hasaka N, Morita H and Ohmura E 2010 Influence of thermal expansion coefficient in laser scribing of glass Precis. Eng. 34 70–75

    [25] [25] Podlesnik D V, Gilgen H H and Osgood R M Jr 1986 Waveguiding effects in laser-induced aqueous etching of semiconductors Appl. Phys. Lett. 48 496–8

    [26] [26] Tokarev V N, Lopez J, Lazare S and Weisbuch F 2003 High-aspect-ratio microdrilling of polymers with UV laser ablation: experiment with analytical model Appl. Phys. A 76 385–96

    [27] [27] Lazare S, Lopez J and Weisbuch F 1999 High-aspect-ratio microdrilling in polymeric materials with intense KrF laser radiation Appl. Phys. A 69 S1–S6

    [28] [28] Fraggelakis F, Mincuzzi G, Lopez J, Manek-H.nninger I and Kling R 2017 Texturing metal surface with MHz ultra-short laser pulses Opt. Express 25 18131–9

    [29] [29] Tsibidis G D, Barberoglou M, Loukakos P A, Stratakis E and Fotakis C 2012 Dynamics of ripple formation on silicon surfaces by ultrashort laser pulses in subablation conditions Phys. Rev. B 86 115316

    Tools

    Get Citation

    Copy Citation Text

    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Crack-free high-aspect ratio holes in glasses by top–down percussion drilling with infrared femtosecond laser GHz-bursts[J]. International Journal of Extreme Manufacturing, 2023, 5(1): 15002

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Apr. 11, 2022

    Accepted: --

    Published Online: Jul. 26, 2024

    The Author Email: (inka.manek-honninger@u-bordeaux.fr)

    DOI:10.1088/2631-7990/acaa14

    Topics