[2] [2] DING Zhongjun, REN Yugang, ZHANG Yi, et al. Ocean Dev Manag, 2019, 36(4): 71-77.

[4] [4] CUI Weicheng, SONG Tingting. Sci Technol Rev, 2019, 37(16): 108-116.

[6] [6] ZHU Daqi, HU Zhen. J Anhui Norm Univ:Nat Sci, 2018, 41(3): 205-216.

[7] [7] IKESUE A, FURUSATO I, KAMATA K. ChemInform abstract: fabrication of polycrystalline, transparent YAG ceramics by a solid- state reaction method[J]. ChemInform, 2010, 27(17):225-228.

[8] [8] IKESUE A, KINOSHITA T, KAMATA K, et al. Fabrication and optical properties of high-performance polycrystalline Nd: YAG ceramics for solid-state lasers[J]. J Am Ceram Soc, 1995, 78(4): 1033-1040.

[9] [9] LU J R, PRABHU M, XU J Q, et al. Highly efficient 2% Nd: yttrium aluminum garnet ceramic laser[J]. Appl Phys Lett, 2000, 77(23): 3707-3709.

[10] [10] YAGI H, BISSON J F, UEDA K, et al. Y3Al5O12 ceramic absorbers for the suppression of parasitic oscillation in high-power Nd: YAG lasers[J]. J Lumin, 2006, 121(1): 88-94.

[12] [12] PAN Yubai, XU Jun, WU Yusong, et al. J Inorg Mater, 2006, 21(5): 1278-1280.

[13] [13] QIN X P, YANG H, SHEN D Y, et al. Fabrication and optical properties of highly transparent Er: YAG polycrystalline ceramics for eye-safe solid-state lasers“[J]. Int J Appl Ceram Technol, 2013, 10(1): 123-128.

[14] [14] COBLE R L, ELLIS J S. Hot-pressing alumina-mechanisms of material transport[J]. J Am Ceram Soc, 1963, 46(9): 438-441.

[15] [15] CHEN H, ZHAO J, SHIMAI S, et al. High transmittance and grain-orientated alumina ceramics fabricated by adding fine template particles[J]. J Adv Ceram, 2022, 11(4): 582-588.

[16] [16] MISAWA T, MORIYOSHI Y, YAJIMA Y, et al. Effect of silica and boron oxide on transparency of magnesia ceramics[J]. J Ceram Soc Japan, 1999, 107(1244): 343-348.

[17] [17] SUZUKI M, IKEGAMI T, YOKOYAMA M, et al. Effects of chloride ion on densification transparency magnesia ceramics[J]. J Ceram Soc Japan, 2005, 113(1314): 149-153.

[18] [18] JIN L L, ZHOU G H, SHIMAI S, et al. ZrO2-doped Y2O3 transparent ceramics via slip casting and vacuum sintering[J]. J Eur Ceram Soc, 2010, 30(10): 2139-2143.

[19] [19] LIU Y, GAN L, QIN X P, et al. Highly transparent yttria ceramics with Nb2O5/Ta2O5 as novel sintering additives by pressureless vacuum sintering[J]. J Am Ceram Soc, 2023, 106(6): 3557-3567.

[20] [20] QIN X P, YANG H, ZHOU G H, et al. Fabrication and properties of highly transparent Er: YAG ceramics[J]. Opt Mater, 2012, 34(6): 973-976.

[21] [21] LIU W B, LI J, JIANG B X, et al. 2.44 KW laser output of Nd: YAG ceramic slab fabricated by a solid-state reactive sintering[J]. J Alloys Compd, 2012, 538: 258-261.

[22] [22] FANG C J, JING Z, QIN X P, et al. Effect of heat treatment of green bodies on the sintering and optical properties of large-size and thick transparent YAG ceramics[J]. Ceram Int, 2021, 47(7): 9606-9612.

[24] [24] LUO Haoming, HAN Dan, ZHANG Jian, et al. J Ceram, 2022, 43(3): 433-440.

[25] [25] HAN D, ZHANG J, LIU P, et al. Effect of the pre-sintering atmosphere on the microstructures and optical qualities of transparent spinel ceramics[J]. Ceram Int, 2022, 48(6): 7806-7814.

[26] [26] MCCAULEY J W, CORBIN N D. Phase relations and reaction sintering of transparent cubic aluminum oxynitride spinel (ALON)[J]. J Am Ceram Soc, 1979, 62(9/10): 476-479.

[27] [27] GUO H, YANG S X, CHEN H T, et al. Effects of AlN content on mechanical and optical properties of AlON transparent ceramics[J]. Ceram Int, 2020, 46(10): 16677-16683.

[28] [28] AN L Q, SHI R W, MAO X J, et al. Fabrication of AlON transparent ceramics with Si3N4 sintering additive[J]. J Adv Ceram, 2023, 12(7): 1361-1370.

[29] [29] ZENG X, HE X Y, CHENG W X, et al. Effect of Dy substitution on ferroelectric, optical and electro-optic properties of transparent Pb0.90La0.10(Zr0.65Ti0.35)O3 ceramics[J]. Ceram Int, 2014, 40(4): 6197-6202.

[30] [30] CHENG H J, HE X Y, ZENG X, et al. A novel vacuum/oxygen hot press sintering approach for the fabrication of transparent PLZT (7.4/70/30) ceramics[J]. Ceram Int, 2021, 47(7): 9620-9626.

[31] [31] HU S, LU C H, ZHOU G H, et al. Transparent YAG: Ce ceramics for WLEDs with high CRI: Ce3+ concentration and sample thickness effects[J]. Ceram Int, 2016, 42(6): 6935-6941.

[33] [33] LIU Qiang, LIU Jing, LI Jiang, et al. J Chin Ceram Soc, 2013, 41(10): 1323-1330.

[35] [35] LI Pengjie, BAI Xue, LIU Yuyang, et al. J Chin Soc Rare Earths, 2023, 41(2): 214-231.