Journal of the Chinese Ceramic Society, Volume. 50, Issue 5, 1223(2022)

Residual Thermal Stress and Failure Probability Analysis of Solid Oxide Fuel Cell with Gradient Anode

ZHANG Xi... YAN Zilin, ZHOU Yexin and ZHONG Zheng |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    References(33)

    [1] [1] AKKAYA A V. Electrochemical model for performance analysis of a tubular SOFC[J]. Int J Energy Res, 2007, 31: 79-98.

    [2] [2] SUGIHARA K, ASAMOTO M, ITAGAKI Y, et al. A quantitative analysis of influence of Ni particle size of SDC-supported anode on SOFC performance: Effect of particle size of SDC support[J]. Solid State Ionics, 2014, 262: 433-437.

    [3] [3] JUNG G B, FANG L H, CHIOU M J, et al. Effects of pretreatment methods on electrodes and SOFC performance[J]. Energies, 2014, 7: 3922-3933.

    [4] [4] CEBOLLERO J A, LAHOZ R, LAGUNA-BERCERO M A, et al. Tailoring the electrode-electrolyte interface of solid oxide fuel cells (SOFC) by laser micro-patterning to improve their electrochemical performance[J]. J Power Sources, 2017, 360: 336-344.

    [8] [8] XU M, LI T H, YANG M, et al. Solid oxide fuel cell interconnect design optimization considering the thermal stresses[J]. Sci Bull, 2016, 61: 1333-1344.

    [9] [9] SELIMOVIC A, KEMM M, TORISSON T, et al. Steady state and transient thermal stress analysis in planar solid oxide fuel cells[J]. J Power Sources, 2005, 145: 463-469.

    [10] [10] NAKAJO A, STILLER C, HRKEGRD G, et al. Modeling of thermal stresses and probability of survival of tubular SOFC[J]. J Power Sources, 2006, 158: 287-294.

    [11] [11] YAKABE H, BABA Y, SAKURAI T, et al. Evaluation of the residual stress for anode-supported SOFCs[J]. J Power Sources, 2004, 135: 9-16.

    [12] [12] ZHANG T, ZHU Q S, HUANG W L, et al. Stress field and failure probability analysis for the single cell of planar solid oxide fuel cells[J]. J Power Sources, 2008, 182: 540-545.

    [13] [13] KONG W, ZHANG W X, ZHANG S D, et al. Residual stress analysis of a micro-tubular solid oxide fuel cell[J]. Int J Hydrogen Energy, 2016, 41: 16173-16180.

    [14] [14] NI M, LEUNG K H, LEUNG D Y. Micro-scale modelling of solid oxide fuel cells with micro-structurally graded electrodes[J]. J Power Sources, 2007, 168: 369-378.

    [15] [15] WANG C, HUANG G, MILLER R. Computational analysis of solid oxide fuel cell with functionally graded electrodes[C]//49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 2011.

    [16] [16] WANG C. Computational analysis of functionally graded anode in solid oxide fuel cell by involving the correlations of microstructural parameters[J]. Energies, 2016, 9(6): 408.

    [17] [17] HU L, WANG C A, HUANG Y, et al. Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures[J]. J Europ Ceram Soc, 2010, 30: 3389-3396.

    [18] [18] MCCOPPIN J, BARNEY I, MUKHOPADHYAY S, et al. Compositional control of continuously graded anode functional layer[J]. J Power Sources, 2012, 215: 160-163.

    [19] [19] CHEN Y, ZHANG Y, BAKER J, et al. Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film[J]. ACS Appl Materi Interfaces, 2014, 6: 5130-6.

    [21] [21] WANG Y S, HUANG G Y, GROSS D. On the mechanical modelling of functionally graded interfacial zone with a Griffith crack[J]. Int J Fract, 2004, 70: 676-680.

    [22] [22] WANG Y S, HUANG G Y, GROSS D. The fracture analysis of a graded coating/substrate system of finite thickness with arbitrary spatial variations of coating properties: Plane deformation[J]. Eng Fract Mechan, 2005, 72: 1942-1953.

    [23] [23] KE L L, WANG Y S. Two-dimensional sliding frictional contact of functionally graded materials[J]. Eur J Mechan A, 2007, 26: 171-188.

    [24] [24] KIM K P, BAE K, KIM K H, et al. Reduction of residual thermal stress on anode-supported SOFCs using porous aid layers[J]. Int J Precis Eng Man, 2012, 13: 2149-2154.

    [25] [25] ANANDAKUMAR G, LI N, VERMA A, et al. Thermal stress and probability of failure analyses of functionally graded solid oxide fuel cells[J]. J Power Sources, 2010, 195: 6659-6670.

    [26] [26] XIE J M, HAO W Q, WANG F H. Analysis of anode functional layer for minimizing thermal stress in solid oxide fuel cell[J]. Appl Phys A, 2017, 123: 1-14.

    [27] [27] SAIED M, AHMED K, AHMED M, et al. Investigations of solid oxide fuel cells with functionally graded electrodes for high performance and safe thermal stress[J]. Int J Hydrogen Energy, 2017, 42: 15887-15902.

    [28] [28] ATKINSON A, SELCUK A. Residual stress and fracture of laminated ceramic membranes[J]. Acta Mater, 1999, 47: 867-874.

    [29] [29] FANG X R, ZHU J, LIN Z J. Effects of electrode composition and thickness on the mechanical performance of a solid oxide fuel cell[J]. Energies, 2018, 11: 1735.

    [30] [30] NEMAT-ALLA M. Reduction of thermal stresses by developing two-dimensional functionally graded materials[J]. Int J Solids Struct, 2003, 40: 7339-7356.

    [31] [31] MORI M, YAMAMOTO T, ITOH H, et al. Thermal expansion of nickel-zirconia anodes in solid oxide fuel cells during fabrication and operation[J]. J Electrochem Soc, 1998, 145: 1374-1380.

    [32] [32] GIRAUD S, CANEL J. Young’s modulus of some SOFCs materials as a function of temperature[J]. J Europ Ceram Soc, 2008, 28: 77-83.

    [33] [33] HUBERT O, MILHET X, GADAUD P, et al. Modeling of Young’s modulus variations with temperature of Ni and oxidized Ni using a magneto-mechanical approach[J]. Mater Sci Eng: A, 2015, 633: 76-91.

    [34] [34] KIM J W, BAE K, KIM H J, et al. Three-dimensional thermal stress analysis of the re-oxidized Ni-YSZ anode functional layer in solid oxide fuel cells[J]. J Alloys Compds, 2018, 752: 148-154.

    [35] [35] NAKAJO A, WUILLEMIN Z, VAN HERLE J, et al. Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: Probability of failure of the cells[J]. J Power Sources, 2009, 193: 203-215.

    [36] [36] FANG X R, LIN Z J. Numerical study on the mechanical stress and mechanical failure of planar solid oxide fuel cell[J]. Appl Energy, 2018, 229: 63-68.

    [37] [37] LI J Y, LIN Z J. Effects of electrode composition on the electrochemical performance and mechanical property of micro-tubular solid oxide fuel cell[J]. Int J Hydrogen Energy, 2012, 37: 12925-12940.

    Tools

    Get Citation

    Copy Citation Text

    ZHANG Xi, YAN Zilin, ZHOU Yexin, ZHONG Zheng. Residual Thermal Stress and Failure Probability Analysis of Solid Oxide Fuel Cell with Gradient Anode[J]. Journal of the Chinese Ceramic Society, 2022, 50(5): 1223

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: May. 10, 2021

    Accepted: --

    Published Online: Nov. 23, 2022

    The Author Email:

    DOI:

    CSTR:32186.14.

    Topics