[1] Liu F G, Lin X, Song K et al. Microstructure and mechanical properties of laser forming repaired 300M steel[J]. Acta Metallurgica Sinica, 53, 325-334(2017).

[2] Wu D J, Liu N, Yu C et al. Microstructure and mechanical properties of Al2O3 reinforced NiCrAlY coatings by directed laser deposition[J]. Surface Technology, 49, 203-212(2020).

[3] Li J B, Shang S, Sun Y Z et al. Parameter nondimensionalization in laser direct metal deposition formation of Inconel 625 and its influence on single track geometric morphology[J]. Chinese Journal of Lasers, 44, 0302010(2017).

[4] Xu Q D, Wang S G, Le G M et al. Process parameters and microstructure of laser forming repaired Inconel 625 alloy[J]. Rare Metal Materials and Engineering, 48, 1598-1604(2019).

[5] Zhao Z, Chen J, Zhang Q et al. Microstructure and mechanical properties of laser additive repaired Ti17 titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 27, 2613-2621(2017).

[6] Li Q G, Lin X, Wang X H et al. Research on the cracking control of laser additive repaired K465 superalloy[J]. Rare Metal Materials and Engineering, 46, 955-960(2017).

[7] Zhong M L, Sun H Q, Liu W J et al. Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy[J]. Scripta Materialia, 53, 159-164(2005).

[8] Ying J L, Chao B X, Li Z Y. Research on laser additive remanufacturing technology of 4J36 invar alloy steel[J]. New Technology & New Process, 54-57(2019).

[9] Bian H Y, Zhai Q X, Qu S et al. Effect of aging heat treatment on microstructure and properties of laser deposition repaired GH738 alloy[J]. Rare Metal Materials and Engineering, 48, 317-322(2019).

[10] Zhang J T, Zhang W, Li Y J et al. Laser deposition additive/subtractive hybrid manufacturing process for stainless steel powder based on DMG MORI LASERTEC 65 3D[J]. Materials Science and Engineering of Powder Metallurgy, 23, 368-374(2018).

[11] Mahamood R M, Akinlabi E T. Scanning speed and powder flow rate influence on the properties of laser metal deposition of titanium alloy[J]. The International Journal of Advanced Manufacturing Technology, 7, 2419-2426(2017).

[12] Mahamood R M, Akinlabi E T. Effect of the scanning speed of treatment on the microstructure, microhardness, wear, and corrosion behavior of laser metal-deposited Ti-6Al-4V/TiC composite[J]. Materials Science, 53, 76-85(2017).

[13] Wang J C, Zeng R X, Jin Y F et al. Effect of Mg and Cu elements on corrosion resistance of low-silicon cast aluminum alloy[J]. Shanghai Metals, 41, 44-50,56(2019).

[14] Huang N B, Qiu Z Y, Ren J et al. Effect of lanthanum-cerium mixed rare earth on electrochemical behavior of AM60B magnesium alloy[J]. Material Sciences, 9, 923-933(2019).

[15] Zhou Z Y, Liu X B, Zhuang S G et al. Preparation and high temperature tribological properties of laser in situ synthesized self-lubricating composite coatings containing metal sulfides on Ti6Al4V alloy[J]. Applied Surface Science, 481, 209-218(2019).

[16] Liu X B, Meng X J, Liu H Q et al. Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti-6Al-4V alloy[J]. Materials & Design, 55, 404-409(2014).

[17] Yang M S, Liu X B, Fan J W et al. Microstructure and wear behaviors of laser clad NiCr/Cr3C2-WS2 high temperature self-lubricating wear-resistant composite coating[J]. Applied Surface Science, 258, 3757-3762(2012).

[18] Yang G, Wang W, Qin L Y et al. Microstructure and property of laser metal deposition composite coating on Ti6Al4V alloy surface[J]. High Power Laser and Particle Beams, 25, 2723-2728(2013).