Optics and Precision Engineering, Volume. 32, Issue 12, 1849(2024)

Design and verification of large high precision derotator

Daoman RUI1...2,*, Cheng ZHANG1,2, Wenru LI1,2, Cheng LI1,2, Fengai WEN1,2, and Hao XIAN12 |Show fewer author(s)
Author Affiliations
  • 1National Laboratory on Adaptive Optics, Chengdu60209, China
  • 2Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu61009, China
  • show less
    References(18)

    [1] P Y BELY. the design and construction of large optical telescopes(2003).

    [2] [2] 张岩, 陈宝刚, 李洪文, 等. 大口径望远镜消旋K镜旋转策略及准直技术研究[J]. 光电子, 2019, 9(3): 129-140. doi: 10.12677/OE.2019.93019ZHANGY, CHENB, LIH W, et al. Rotating strategy and alignment technology of K mirror in large aperture telescope[J]. Optoelectronics, 2019, 9(3): 129-140. (in Chinese). doi: 10.12677/OE.2019.93019

    [3] B R BRANDL, R LENZEN, E PANTIN et al. METIS: the thermal infrared instrument for the E-ELT, 8446, 554-566(2012).

    [4] S BARBOZA, J U POTT, R R ROHLOFF et al. Design of a large image derotator for the E-ELT Instrument MICADO, 9908, 2843-2856(2016).

    [5] [5] 王福全, 王珏, 谢志江, 等. 精密转台角分度误差补偿[J]. 光学 精密工程, 2017, 25(8): 2165-2172. doi: 10.3788/ope.20172508.2165WANGF Q, WANGJ, XIEZ J, et al. Compensation of angular indexing error for precision turntable[J]. Opt. Precision Eng., 2017, 25(8): 2165-2172.(in Chinese). doi: 10.3788/ope.20172508.2165

    [6] [6] 折文集, 高立民, 杨永清, 等. 激光跟踪仪测角误差标定及补偿[J]. 仪器仪表学报, 2015, 36(Z1): 52-56. doi: 10.3969/j.issn.0254-3087.2015.Z1.009SHEW J, GAOL M, YANGY Q, et al. Calibration and compensation of angular error in laser tracker[J]. Chinese Journal of Scientific Instrument, 2015, 36(Z1): 52-56. (in Chinese). doi: 10.3969/j.issn.0254-3087.2015.Z1.009

    [7] [7] 张文颖, 朱浩然. 圆光栅测角系统误差分析与修正[J]. 应用光学, 2019, 40(3): 399. doi: 10.5768/jao201940.0301007ZHANGW Y, ZHUH R. Error analysis and correction of circular grating angle measurement system[J]. Journal of Applied Optics, 2019, 40(3): 399.(in Chinese). doi: 10.5768/jao201940.0301007

    [8] [8] 王笑一, 王永军, 雷贤卿, 等. 非对径安装双读数头圆光栅偏心测角误差修正[J]. 光学 精密工程, 2021, 29(5): 1103-1114. doi: 10.37188/OPE.20212905.1103WANGX Y, WANGY J, LEIX Q, et al. Correction method for angle measurement error of eccentric encoder with double read-heads installed non-diametrically opposite[J]. Opt. Precision Eng., 2021, 29(5): 1103-1114.(in Chinese). doi: 10.37188/OPE.20212905.1103

    [9] J BAUDET, L JOLISSAINT, O KESKIN et al. Design of a derotator for the 4 m DAG telescope, 9908, 1648-1653(2016).

    [10] Z LOU, M LIANG, D Z YAO et al. Optical design study of the wide field survey telescope (WFST), 10154, 587-596(2016).

    [11] Z Y LIN, N JIANG, X KONG. The prospects of finding tidal disruption events with 2.5-m wide-field survey telescope based on mock observations. Monthly Notices of the Royal Astronomical Society, 513, 2422-2436(2022).

    [12] [12] 江炜, 周维虎, 劳达宝, 等. 多光栅测角系统精密转台轴系设计[J]. 仪表技术与传感器, 2018(9): 24-28. doi: 10.1117/12.2283083JIANGW, ZHOUW H, LAOD B, et al. Design of precision turntable shaft for multi-gratings angle measuring system[J]. Instrument Technique and Sensor, 2018(9): 24-28.(in Chinese). doi: 10.1117/12.2283083

    [13] [13] 姚雪峰, 孙慈, 杨晋, 等. 高精度角位移平台的研制及误差补偿[J]. 仪器仪表学报, 2016, 37(5): 961-967.YAOX F, SUNC, YANGJ, et al. Development and error compensation of the high precision turntable[J]. Chinese Journal of Scientific Instrument, 2016, 37(5): 961-967.(in Chinese)

    [14] [14] 于夫男, 徐抒岩. 应用于Φ300 mm平面反射镜的精密二维转台轴系设计[J]. 光学 精密工程, 2020, 28(5): 1075-1082. doi: 10.3788/OPE.20202805.1075YUF N, XUS Y. Shafting design for precise two-dimensional turntable applied to Φ 300 mm plane mirror[J]. Opt. Precision Eng., 2020, 28(5): 1075-1082.(in Chinese). doi: 10.3788/OPE.20202805.1075

    [15] [15] 杜俊峰, 张孟伟, 张晓明. 光电经纬仪测角精度分析[J]. 应用光学, 2012, 33(3): 466-473. doi: 10.5768/JAO201233.0301005DUJ F, ZHANGM W, ZHANGX M. Angle measurement accuracy of photoelectric theodolite[J]. Journal of Applied Optics, 2012, 33(3): 466-473.(in Chinese). doi: 10.5768/JAO201233.0301005

    [16] [16] 张艳辉, 赵勇志. 1m望远镜俯仰轴系精度分析[J]. 机械设计与制造, 2011(3): 185-186. doi: 10.3969/j.issn.1001-3997.2011.03.074ZHANGY H, ZHAOY Z. 1m aperture telescope’s altitude axis error analyzing[J]. Machinery Design & Manufacture, 2011(3): 185-186.(in Chinese). doi: 10.3969/j.issn.1001-3997.2011.03.074

    [17] [17] 艾晨光, 褚明, 孙汉旭, 等. 基准圆光栅偏心检测及测角误差补偿[J]. 光学 精密工程, 2012, 20(11): 2479-2484. doi: 10.3788/ope.20122011.2479AIC G, CHUM, SUNH X, et al. Eccentric testing of benchmark circular grating and compensation of angular error[J]. Opt. Precision Eng., 2012, 20(11): 2479-2484.(in Chinese). doi: 10.3788/ope.20122011.2479

    [18] [18] 任曦, 杜升平, 陈科, 等. 圆光栅编码器测角误差源及频谱分析[J]. 激光与光电子学进展, 2020, 57(17): 171205. doi: 10.3788/lop57.171205RENX, DUS P, CHENK, et al. Error source and spectrum analysis for angle measurement of circular grating encoder[J]. Laser & Optoelectronics Progress, 2020, 57(17): 171205.(in Chinese). doi: 10.3788/lop57.171205

    Tools

    Get Citation

    Copy Citation Text

    Daoman RUI, Cheng ZHANG, Wenru LI, Cheng LI, Fengai WEN, Hao XIAN. Design and verification of large high precision derotator[J]. Optics and Precision Engineering, 2024, 32(12): 1849

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Nov. 17, 2023

    Accepted: --

    Published Online: Aug. 28, 2024

    The Author Email: RUI Daoman (dmrui@126.com)

    DOI:10.37188/OPE.20243212.1849

    Topics