[1] [1] STOLZ C J. Brewster's angle thin film plate polarizer design study from an electric field perspective［C］.Optical Systems Design and Production, International Society for Optics and Photonics, 1999: 347-353.

[2] [2] OLIVER J B, RIGATTI A L, HOWE J D, et al.. Thin-film polarizers for the OMEGA EP laser system［C］.Boulder Damage Symposium XXXVII: Annual Symposium on Optical Materials for High Power Lasers, International Society for Optics and Photonics, 2005: 599119-599119-8.

[3] [3] DEFORD J F, KOZLOWSKI M R. Modeling of electric-field enhancement at nodular defects in dielectric mirror coatings［C］.Optical Materials for High Power Lasers, International Society for Optics and Photonics, 1993: 455-472.

[4] [4] GENIN F Y, STOLZ C J, REITTER T A, et al.. Effect of electric field distribution on the morphologies of laser-induced damage in hafnia-silica multilayer polarizers［C］.Laser-Induced Damage in Optical Materials: 1996, International Society for Optics and Photonics, 1997: 342-352.

[5] [5] SHEEHAN L M, KOZLOWSKI M R, RAINER F, et al.. Large-area conditioning of optics for high-power laser systems［C］.Laser-Induced Damage in Optical Materials: 1993. International Society for Optics and Photonics, 1994: 559-568.

[6] [6] BERCEGOL H. What is laser conditioning A review focused on dielectric multilayers［J］.SPIE,1999, 3578:421-426.

[7] [7] WOLFE C R, KOZLOWSKI M R, CAMPBELL J H, et al.. Laser conditioning of optical thin films［J］.SPIE,1990:1-3.

[8] [8] CAMPBELL J H, HAWLEY-FEDDER R A, STOLZ C J, et al.. NIF optical materials and fabrication technologies: an overview［C］.Lasers and Applications in Science and Engineering, International Society for Optics and Photonics, 2004: 84-101.

[9] [9] LAWSON J K, AIKENS D M, ENGLISH Jr R E, et al.. Surface figure and roughness tolerances for NIF optics and the interpretation of the gradient, PV wavefront, and RMS specifications［J］.SPIE's International Symposium on Optical Science, Engineering, and Instrumentation. International Society for Optics and Photonics, 1999: 510-517.

[10] [10] LAWSON J K, AIKENS D M, ENGLISH Jr R E, et al.. Power spectral density specifications for high-power laser systems［C］.Optical Instrumentation & Systems Design, International Society for Optics and Photonics, 1996: 345-356.

[11] [11] LAVASTRE E, NAUPORT J, DUCHESNE J, et al.. Polarizers coatings for the Laser MegaJoule prototype［C］.Optical Interference Coatings, Optical Society of America, 2004: TuF3.

[12] [12] ZHU M, YI K, ZHANG W, et al.. Preparation of high performance thin-film polarizers［J］. Chinese Optics Letters, 2010, 8(6): 624-626.

[13] [13] ZHU M, YI K, FAN Z, et al.. Theoretical and experimental research on spectral performance and laser induced damage of Brewster's thin film polarizers［J］. Applied Surface Science, 2011, 257(15): 6884-6888.

[14] [14] ZHANG D, SHAO J, ZHANG D, et al.. Employing oxygen-plasma posttreatment to improve the laser-induced damage threshold of ZrO2 films prepared by the electron-beam evaporation method［J］. Optics Letters, 2004, 29(24): 2870-2872.

[15] [15] ZHANG D, WANG C, FAN P, et al.. Influence of plasma treatment on laser-induced damage characters of HfO2 thin films at 355 nm［J］. Optics Express, 2009, 17(10): 8246-8252.